Skip to main content

Joinery Workshop

1300 WSM

  • Chosen By List:
    • List Item: Furniture and panel manufacturers who need consistent brushed or structured surface finishes across wide boards in a single pass
    • List Item: Joinery and flooring operations processing reclaimed or engineered timber where wire finishing or distressing is part of the product
    • List Item: Production workshops that have outgrown narrower sanding capacity and need a machine that can handle full panel widths without multiple passes
  • This Product List:
    • List Item: You need to process panels or boards up to the full 1300mm width and a narrower machine would require multiple passes
    • List Item: Your finishing process specifically requires wire brushing, brush sanding, or a combination of both — not just abrasive belt sanding
    • List Item: You need a four-station machine to combine different finish operations in a single pass through the machine
    • List Item: Your throughput justifies a machine of this size and weight, and you have the three-phase supply and floor loading capacity to support it
  • Alternate List:
    • List Item: You only need abrasive belt sanding rather than wire or brush finishing — the <a href="index.php?option=com_content&view=article&id=97&catid=29">MOSTRO 1300 2U</a> or <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> may be more appropriate for that work
    • List Item: Your working width rarely exceeds 1000mm — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> offers a smaller footprint and lower installed power for narrower work
    • List Item: You need a lighter or more compact 1300mm machine — speak to us about the <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> as a comparison point
    • List Item: Your requirement is for softer or finer surface finishing rather than structured or wire-brushed textures — the <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> may better suit that application
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: Up to 1300 mm
    • Specification Name: Sanding Stations, Specification Value: 4 (wire and brush units), Specification Notes: A four-station configuration allows wire and brush operations to be combined in a single pass, reducing handling time and keeping finish consistent across a production run.
    • Specification Name: Product Thickness, Specification Value: 3 mm – 160 mm
    • Specification Name: Total Installed Power, Specification Value: 24.05 kW, Specification Notes: This machine requires a 400V three-phase supply — confirm available amperage with your electrician before ordering.
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: Up to 1300 mm
    • Specification Name: Product Thickness, Specification Value: 3 mm – 160 mm
    • Specification Name: Minimum Working Length, Specification Value: 330 mm
    • Specification Name: Maximum Working Length, Specification Value: No published upper limit, Specification Notes: Baromak does not specify a maximum working length for this model — if you are processing unusually long boards, speak to us and we will confirm suitability with the manufacturer directly.
    • Specification Name: Sanding Stations, Specification Value: 4 (wire and brush units), Specification Notes: A four-station configuration allows wire and brush operations to be combined in a single pass, reducing handling time and keeping finish consistent across a production run.
    • Specification Name: Max Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 24.05 kW, Specification Notes: Confirm available amperage at your distribution board before ordering — 24kW at 400V three-phase draws significant current.
    • Specification Name: Voltage, Specification Value: 400 V
    • Specification Name: Machine Dimensions, Specification Value: 2235 x 2020 x 1610 mm (L x W x H), Specification Notes: Allow additional clearance beyond the machine footprint for infeed, outfeed, and operator movement — particularly given the 1300mm working width.
    • Specification Name: Total Machine Weight, Specification Value: 1,893 kg, Specification Notes: At close to 1,900kg, floor loading capacity should be assessed by a structural engineer before installation.
  • Product Gallery:
    • Image: Baromak 1300 WSM industrial wide belt sanding machine with blue and grey casing, control panel, and feed conveyor table
    • Image: Baromak 1300 WSM industrial machine with a large flat bed, motor unit, blue coiled hose, and ventilated white casing
    • Image: Baromak 1300 WSM industrial sanding machine with conveyor belt, blue safety columns, transparent guard panel and coiled air hose
    • Image: Baromak 1300 WSM industrial wide belt sanding machine with open lid, blue accent lighting, and feed conveyor table
A four-station automatic wiring machine for workshops that need consistent brushed or structured surface effects across full panel widths. Wire brushing, hard plastic wire brushing, and brush sanding in a single pass — without the handling overhead of separate operations.

3U SISAN

  • Chosen By List:
    • List Item: Joinery and cabinet shops that need to progress components through calibration, intermediate, and finish sanding in a single pass
    • List Item: Workshops producing smaller moulded or flat components where consistent thickness and surface quality are critical to downstream assembly or finishing
    • List Item: Businesses looking to reduce manual hand-sanding time by bringing more of the process through a controlled machine cycle
  • This Product List:
    • List Item: You need to calibrate, intermediate-sand, and finish components in a single pass without re-jigging between machines
    • List Item: Your work regularly involves narrower components — such as door stiles, drawer fronts, or cabinet parts — that require a consistent and repeatable surface quality
    • List Item: You are processing components at volumes where manual sanding is creating a bottleneck or inconsistency, but do not yet need a full wide-format machine
    • List Item: Your workshop produces both flat and lightly textured or brush-finished surfaces and needs a machine configuration that handles both
  • Alternate List:
    • List Item: You are primarily sanding wider panels or board material — the <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> or <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> / <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> may be more appropriate depending on your volume and surface requirements
    • List Item: Your throughput requirements are lower and a two-station machine would suffice — the <a href="index.php?option=com_content&view=article&id=97&catid=29">MOSTRO 1300 2U</a> or <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> are worth discussing with IWM as a potentially simpler specification
    • List Item: You only need calibration sanding without a finish pass, in which case a single-head machine may represent better value for your workshop
    • List Item: Your working widths consistently exceed the capacity of this machine — talk to IWM about the <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> as a wider-capacity alternative
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: 110 mm and above, Specification Notes: The 110 mm minimum makes this machine well suited to narrower components such as door stiles, drawer fronts, and small cabinet parts — confirm maximum working width with IWM before specifying.
    • Specification Name: Working Thickness, Specification Value: 5 mm to 42 mm
    • Specification Name: Sanding Stations, Specification Value: 3 (1 belt roller + 2 brush roller units), Specification Notes: Three independently adjustable stations allow calibration, intermediate, and finish sanding in one pass, removing the need to run components through multiple machines or set-ups.
    • Specification Name: Total Installed Power, Specification Value: 4.29 kW, Specification Notes: Three-phase 380 V / 50 Hz supply required — confirm your workshop supply is suitable before ordering.
  • Full Specifications:
    • Specification Name: Working Width (minimum), Specification Value: 110 mm, Specification Notes: Maximum working width is not published in available data — talk to IWM to confirm the upper capacity before specifying against your widest components.
    • Specification Name: Working Thickness Range, Specification Value: 5 mm to 42 mm
    • Specification Name: Number of Sanding Stations, Specification Value: 3
    • Specification Name: Station Configuration, Specification Value: 1 belt roller unit, 2 brush roller units, Specification Notes: The combination of a belt roller and two brush rollers suits both flat and lightly profiled or textured surfaces — discuss your component profile with IWM if there is any surface relief.
    • Specification Name: Station Adjustment, Specification Value: Independent on each station
    • Specification Name: Oscillation, Specification Value: Independent oscillation motors on each station, Specification Notes: Independent oscillation on each head reduces the risk of sanding marks and cross-grain scratching that can occur when all stations move in phase.
    • Specification Name: Conveyor Speed, Specification Value: Inverter controlled, Specification Notes: Variable conveyor speed lets operators tune feed rate to material species and abrasive grit without mechanical change-parts.
    • Specification Name: Total Installed Power, Specification Value: 4.29 kW
    • Specification Name: Electrical Supply, Specification Value: 380 V, 50 Hz, three phase, Specification Notes: Confirm three-phase supply availability at your distribution board before ordering — contact IWM if you need guidance on amperage requirements.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 2240 × 800 × 1200 mm, Specification Notes: Allow additional clearance beyond the machine footprint for infeed and outfeed of long components, and for extraction ducting connections.
    • Specification Name: Machine Weight, Specification Value: 540 kg, Specification Notes: At 540 kg, floor loading capacity should be checked, particularly on suspended or older workshop floors.
  • Product Gallery:
    • Image: Close-up of a white industrial machine beam fitted with a row of circular pressure rollers above black guide blocks
    • Image: Close-up of industrial brushes and rollers along a conveyor track on a 3U SISAN machine
    • Image: Close-up of a rotating abrasive drum sanding belt alongside a row of grinding wheels inside an industrial sanding machine
A three-station automatic edge sander that takes narrow to mid-width components through calibration, intermediate, and finish sanding in a single pass. Built for joinery and cabinet shops where surface consistency and throughput matter.

BR MS 1U

  • Chosen By List:
    • List Item: Joinery and cabinet shops that need a dedicated brush sanding station without committing to a multi-head machine
    • List Item: Workshops finishing profiled, moulded, or routed timber where a flat-bed sander won't follow the surface
    • List Item: Smaller production operations looking to add a standalone oscillating brush stage to an existing finishing line
  • This Product List:
    • List Item: You need a standalone brush sanding station and a single head is sufficient for your current production volume
    • List Item: Your workshop is space-constrained — the BR MS 1U has a notably compact footprint for a brush sanding machine
    • List Item: You finish a variety of timber profiles and need the flexibility of variable roll speed to adapt between jobs
    • List Item: You want to introduce oscillating brush sanding without the capital outlay of a multi-station machine
  • Alternate List:
    • List Item: You need to sand panels up to 1000 mm or 1300 mm wide — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> or <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> would be more appropriate for wider stock
    • List Item: Your throughput demands two brush passes in a single machine run — the <a href="index.php?option=com_content&view=article&id=97&catid=29">MOSTRO 1300 2U</a> or <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> offer twin-head configuration
    • List Item: You require a softer, more delicate surface finish — the <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> may be better suited depending on your finishing requirements
    • List Item: Feed speed or conveyor belt width is a primary decision factor — talk to us directly to compare the BR MS 1U against the LUNA range on those criteria before specifying
  • Key Specifications:
    • Specification Name: Roll Diameter, Specification Value: 300 mm
    • Specification Name: Roll Height, Specification Value: 200 mm, Specification Notes: This sets the maximum workpiece width the brush can act on — confirm your typical board or panel width falls within this before specifying.
    • Specification Name: Installed Power, Specification Value: 1.12 kW
    • Specification Name: Roll Speed Control, Specification Value: Inverter controlled, Specification Notes: Variable speed via inverter allows the operator to tune surface aggression to the timber species or finish required, without changing brushes.
  • Full Specifications:
    • Specification Name: Sanding Stations, Specification Value: 1 (adjustable brush), Specification Notes: A single station suits workshops where brush sanding is a dedicated step; if you need two passes in one machine, consider a twin-head alternative.
    • Specification Name: Oscillation, Specification Value: Independent oscillation system, Specification Notes: Oscillation moves the brush laterally as it rotates, which helps prevent score lines and produces a more even surface finish.
    • Specification Name: Roll Diameter, Specification Value: 300 mm
    • Specification Name: Roll Height, Specification Value: 200 mm
    • Specification Name: Roll Speed Control, Specification Value: Inverter controlled
    • Specification Name: Total Installed Power, Specification Value: 1.12 kW
    • Specification Name: Voltage, Specification Value: 400 V, Specification Notes: This is a three-phase supply requirement — confirm your workshop has a 400 V three-phase connection before ordering.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 860 × 735 × 1150 mm, Specification Notes: Allow additional clearance on the infeed and outfeed sides for workpiece handling and extraction ducting.
    • Specification Name: Machine Weight, Specification Value: 163 kg
A compact, single-station oscillating brush sander for workshops that need a dedicated brush sanding step without the footprint or cost of a multi-head machine. Suited to profiled, moulded, and routed timber where a flat-bed sander won't follow the surface.

BR MS 2U

  • Chosen By List:
    • List Item: Joinery and cabinet shops needing a dedicated finishing station for profiled or flat components
    • List Item: Workshops where surface texture or denibbing quality needs to be consistent across a production run
    • List Item: Smaller operations with limited floor space that still need a purpose-built brush sanding capability
  • This Product List:
    • List Item: Your workshop processes components that fall within the 300 mm roll height and you need a compact, standalone brush sanding station
    • List Item: You want inverter-controlled speed variation to handle different species or finish requirements from a single machine
    • List Item: Floor space is limited and a smaller footprint machine is a priority
    • List Item: Your production volume suits a single-station setup rather than an integrated or wider-format sanding line
  • Alternate List:
    • List Item: You are processing wider boards or panels — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> or <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> will offer a wider working width more suited to panel work
    • List Item: Your throughput requires a heavier-duty or higher-capacity machine — the <a href="index.php?option=com_content&view=article&id=97&catid=29">MOSTRO 1300 2U</a> or <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> are worth discussing with us
    • List Item: You need a softer, more delicate finishing action on sensitive surfaces — the <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> may be better suited to that application
    • List Item: You are unsure whether a brush sanding station or a wide-belt sander is the right tool for your finish — talk to us before specifying either
  • Key Specifications:
    • Specification Name: Roll Diameter, Specification Value: 300 mm
    • Specification Name: Roll Height, Specification Value: 300 mm, Specification Notes: Components wider than 300 mm cannot be processed in a single pass — check your typical workpiece width before specifying.
    • Specification Name: Speed Control, Specification Value: Inverter controlled, Specification Notes: Variable speed via inverter means the operator can tune roll speed to suit the timber species, finish required, or abrasive type — without changing brushes.
    • Specification Name: Total Installed Power, Specification Value: 1.5 kW / 400 V, Specification Notes: 400 V three-phase supply required — confirm availability at your premises before ordering.
  • Full Specifications:
    • Specification Name: Roll Diameter, Specification Value: 300 mm
    • Specification Name: Roll Height, Specification Value: 300 mm, Specification Notes: Components wider than 300 mm cannot be processed in a single pass — check your typical workpiece width before specifying.
    • Specification Name: Speed Control, Specification Value: Inverter controlled, Specification Notes: Variable speed via inverter means the operator can tune roll speed to suit the timber species, finish required, or abrasive type — without changing brushes.
    • Specification Name: Total Installed Power, Specification Value: 1.5 kW
    • Specification Name: Voltage, Specification Value: 400 V, Specification Notes: Three-phase supply required — confirm availability at your premises before ordering.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 1240 × 710 × 880 mm, Specification Notes: Allow additional clearance around the machine for workpiece infeed, outfeed, and operator movement — particularly if handling longer components.
    • Specification Name: Machine Weight, Specification Value: 140 kg
    • Specification Name: Brush Roll Adjustability, Specification Value: Adjustable, Specification Notes: Adjustment range and method have not been confirmed by the manufacturer — ask us for details before specifying if this is critical to your process.
    • Specification Name: Dust Extraction Connection, Specification Value: Required — port size to be confirmed, Specification Notes: Extraction must be planned prior to installation; contact us or the manufacturer to confirm the port diameter so your ducting can be sized correctly.
    • Specification Name: Noise Level, Specification Value: Not published, Specification Notes: Noise data is not available from the manufacturer at this time — contact us if a confirmed noise figure is required for your workplace risk assessment.
A compact, two-station manual brush sanding machine suited to joinery and cabinet shops that need consistent denibbing or texturing on profiled and flat components without committing to a full automated line.

Casolin Astra 400 5 CNC panelsaw

  • Chosen By List:
    • List Item: Joinery and shopfitting workshops processing high volumes of sheet material where manual fence resetting between jobs is a bottleneck
    • List Item: Businesses cutting a variety of panel sizes and angles regularly, who need the scoring unit to reposition automatically rather than by hand
    • List Item: Operations that have outgrown a manually-set panel saw and want CNC-level repeatability without moving to a full beam saw
  • This Product List:
    • List Item: You need full 3-axis CNC control — automated fence, tilt, and blade height — rather than electronic readout only, and want settings recalled rather than re-entered manually each time
    • List Item: Your workflow involves frequent changes in panel size, cut angle, or material type within a shift, and manual resetting between cuts is measurably slowing production
    • List Item: You regularly cut veneered or laminated sheet goods and need automatic scoring unit positioning to maintain clean undersides without a separate setup step
    • List Item: You require support for full-length panels up to 3200mm with a canting sliding table that holds the workpiece properly throughout angled cuts
  • Alternate List:
    • List Item: Your volume and variety are lower and full CNC positioning is more than you need — the Casolin Astra SE400 NT with electronic rip fence and scoring offers electronic positioning at a different price point and is worth discussing
    • List Item: You want a comparable CNC panel saw with a longer sliding table or a wider carriage — the Casolin Astra 500 3-axis is in the same family with carriage lengths up to 5000mm and a wider 400mm carriage, and may suit larger sheet sizes
    • List Item: Your requirement is for a robust manually-set panel saw with a strong sliding table but without CNC overhead — the Robland NXZ or Robland Z500 M are worth considering at that level
    • List Item: Space is a constraint and a shorter sliding table would suffice — the Robland FZ3100 with its 3100mm table is worth comparing on footprint and capability
  • Key Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: Supports full-length sheet handling without the sheet overhanging unsupported — relevant if you regularly cut 3050mm or longer boards.
    • Specification Name: CNC Axes, Specification Value: 3-axis (fence, tilt, blade height), Specification Notes: All three adjustments are automated and recalled digitally, which removes the manual resetting that accounts for most lost time between cuts on a conventional saw.
    • Specification Name: Scoring Unit Positioning, Specification Value: 2-axis electronic, automatic, Specification Notes: Automatic scoring unit alignment ensures a clean underside cut on veneered or laminated panels without a separate manual setup step.
    • Specification Name: Sliding Table Warranty, Specification Value: 10 years
  • Full Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: Supports full-length sheet handling without the sheet overhanging unsupported — relevant if you regularly cut 3050mm or longer boards.
    • Specification Name: CNC Axes, Specification Value: 3-axis (fence, tilt, blade height), Specification Notes: All three adjustments are automated and recalled digitally, which removes the manual resetting that accounts for most lost time between cuts on a conventional saw.
    • Specification Name: Scoring Unit Positioning, Specification Value: 2-axis electronic, automatic, Specification Notes: Automatic scoring unit alignment ensures a clean underside cut on veneered or laminated panels without a separate manual setup step.
    • Specification Name: Sliding Table Warranty, Specification Value: 10 years
    • Specification Name: Main Saw Motor, Specification Value: Separate motor (scoring unit independent), Specification Notes: Independent motors for the main blade and scoring unit mean scoring speed can be set optimally without affecting main blade performance.
    • Specification Name: Control Interface, Specification Value: Overhead pendant control, Specification Notes: Pendant positioning keeps the operator at the workpiece rather than stepping away to a fixed panel — practical on long cuts.
    • Specification Name: Scoring Unit Illumination, Specification Value: Yes — illuminated table, Specification Notes: Aids accurate alignment and visibility at the scoring zone, particularly useful in lower-light workshop conditions.
    • Specification Name: Canting Sliding Table, Specification Value: Yes — unique canting design, Specification Notes: The sliding table tilts with the blade on angled cuts, maintaining full panel support rather than leaving the workpiece partially unsupported mid-cut.
    • Specification Name: Angle Display, Specification Value: Digital
    • Specification Name: CE Compliance, Specification Value: Full CE regulation compliance
    • Specification Name: Main Blade Motor Power, Specification Value: 4 kW (5.5 HP) standard; 5.5 kW or 7.5 kW optional, Specification Notes: The standard 4 kW motor suits most solid timber and sheet material cutting; the optional uprated motors are worth specifying if you regularly run larger-diameter blades or dense hardwoods.
    • Specification Name: Scoring Motor Power, Specification Value: 0.75 kW (1 HP)
    • Specification Name: Blade Diameter (main), Specification Value: 250–400 mm (400 mm max), Specification Notes: The 400 mm maximum diameter gives a 125 mm cutting height at 90° — adequate for standard sheet goods and solid timber up to that depth.
    • Specification Name: Scoring Blade Diameter, Specification Value: 120 mm
    • Specification Name: Max Cutting Height (90°), Specification Value: 125 mm (with 400 mm blade)
    • Specification Name: Max Cutting Height (45°), Specification Value: Contact IWM to confirm, Specification Notes: Casolin do not publish the 45° cutting height for this model in their current technical data — talk to us and we can get the figure directly from the manufacturer.
    • Specification Name: Blade Tilt Range, Specification Value: 0° to 45.5°
    • Specification Name: Rip Fence Capacity, Specification Value: 1300 mm (CNC programmable), Specification Notes: The CNC fence travels to 1300 mm and holds position digitally — no manual measurement or locking required between rip cuts.
    • Specification Name: Electrical Supply, Specification Value: 400 V, 3-phase, Specification Notes: Three-phase supply is required — confirm your workshop supply before specifying.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: Contact IWM to confirm, Specification Notes: Allow additional floor space beyond the machine footprint for full sliding table travel and operator clearance on the infeed side.
    • Specification Name: Machine Weight, Specification Value: Contact IWM to confirm, Specification Notes: This is a heavy-duty cast iron machine — confirm floor loading capacity with your structural engineer or building surveyor before installation.
    • Specification Name: Noise Level, Specification Value: Contact IWM to confirm, Specification Notes: If the declared noise level exceeds 85 dB(A), a formal noise risk assessment will be required under the Control of Noise at Work Regulations 2005.
    • Specification Name: Extraction Connection, Specification Value: Contact IWM to confirm, Specification Notes: Ensure your dust extraction system is rated to handle the combined extraction load from both the main blade and the independent scoring unit.
  • Product Gallery:
    • Image: Casolin Astra 400 5 CNC panelsaw aluminium frame and rotating turntable mechanism in a workshop
    • Image: Casolin Astra 400 5 CNC panelsaw with sliding table and scoring blade in a workshop
    • Image: Casolin Astra EL1 control panel with red emergency stop, numeric keypad, LED displays, and Start/Stop buttons
A heavy-duty Italian panel saw with full 3-axis CNC control — fence, tilt, and blade height all automated and recalled digitally — built for workshops where manual resetting between jobs is costing production time. The 3200mm canting sliding table handles full-length sheet material cleanly, including on angled cuts.

Casolin Astra 500 3 axis panelsaw

  • Chosen By List:
    • List Item: Joinery and cabinet shops running repeated batch cuts where manual fence repositioning is losing time and introducing inconsistency
    • List Item: Workshops stepping up from a manual panel saw who need CNC positioning but aren't ready for a full beam saw investment
    • List Item: Operations processing full sheet materials regularly who need the confidence of a 3200 mm sliding table and a scored finish on both faces
  • This Product List:
    • List Item: You're running batch production where recalling stored fence and blade settings between jobs would save meaningful setup time
    • List Item: You regularly cut veneered, laminated, or melamine-faced board and need a dedicated independent scoring unit to protect the face
    • List Item: You're processing full sheet material and need a 3200 mm table with a long-term warranty on the sliding carriage
    • List Item: You want CNC-assisted positioning without the footprint or cost commitment of a full beam saw
  • Alternate List:
    • List Item: Your volume is lower and manual fence adjustment is not a bottleneck — the <a href="index.php?option=com_content&view=article&id=64&catid=25">Casolin Astra SE400 NT</a> with electronic rip fence and scoring may be sufficient and represents a lower entry point
    • List Item: You need a reliable manual or semi-manual panel saw for a smaller workshop — the <a href="index.php?option=com_content&view=article&id=72&catid=25">Robland Z300M</a> or Robland Z500M may be better suited to your throughput
    • List Item: Your primary requirement is a long sliding table for solid timber ripping rather than sheet processing — speak to us about whether the <a href="index.php?option=com_content&view=article&id=71&catid=25">Robland NXZ</a> or <a href="index.php?option=com_content&view=article&id=69&catid=25">Robland FZ3100</a> might be a closer match
    • List Item: Budget is a primary constraint — discuss with IWM which model in the Robland or Casolin range fits your actual production needs without over-specifying
  • Key Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: Sufficient for full 2440 mm sheet material with support to spare — check your floor space allows for the table's full travel plus operator clearance at both ends.
    • Specification Name: CNC Axes, Specification Value: 3 (rip fence, blade height, tilt), Specification Notes: All three axes are CNC-controlled, meaning settings can be stored and recalled — useful for batch runs or jobs that repeat across weeks.
    • Specification Name: Max Cutting Height (90°), Specification Value: 175 mm (500 mm blade) / 200 mm (optional 550 mm blade), Specification Notes: 175 mm clears most standard sheet and solid timber thicknesses; if you regularly cut deep laminated or engineered panels, discuss the optional 550 mm blade with IWM.
    • Specification Name: Scoring Unit, Specification Value: Independent motor, electronic positioning, Specification Notes: An independent scoring motor maintains correct scoring speed regardless of main blade speed, which matters when cutting veneered or melamine-faced boards.
  • Full Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: Sufficient for full 2440 mm sheet material with support to spare — check your floor space allows for the table's full travel plus operator clearance at both ends.
    • Specification Name: CNC Axes, Specification Value: 3 (rip fence, blade height, tilt), Specification Notes: All three axes are CNC-controlled, meaning settings can be stored and recalled — useful for batch runs or jobs that repeat across weeks.
    • Specification Name: Scoring Unit, Specification Value: Independent motor, electronic positioning, Specification Notes: An independent scoring motor maintains correct scoring speed regardless of main blade speed, which matters when cutting veneered or melamine-faced boards.
    • Specification Name: Main Frame Construction, Specification Value: Rigid cast iron, Specification Notes: Cast iron dampens vibration during cutting, which contributes to cut quality and long-term accuracy of the table and fence alignment.
    • Specification Name: Control Panel, Specification Value: Overhead mounted
    • Specification Name: Digital Readouts, Specification Value: Height and angle settings
    • Specification Name: Sliding Table Warranty, Specification Value: 10 years
    • Specification Name: Certification, Specification Value: CE compliant, Specification Notes: CE compliance confirms the machine meets EU/UK machinery safety directives and is suitable for use in a commercial workshop environment.
    • Specification Name: Main Saw Motor, Specification Value: 4 kW (5.5 HP) standard; 5.5, 7.5, 9.2 or 11 kW options available, Specification Notes: The standard 4 kW motor handles typical sheet goods production; higher-output options are available for heavier throughput — discuss with IWM when specifying.
    • Specification Name: Scoring Motor, Specification Value: 0.75 kW (1 HP)
    • Specification Name: Max Blade Diameter, Specification Value: 300–500 mm standard; 550 mm optional (without scoring unit)
    • Specification Name: Max Cutting Height (90°), Specification Value: 175 mm with 500 mm blade; 200 mm with optional 550 mm blade, Specification Notes: 175 mm clears most standard sheet and solid timber thicknesses; if you regularly cut deep laminated or engineered panels, discuss the optional 550 mm blade with IWM.
    • Specification Name: Max Cutting Height (45°), Specification Value: Confirm with IWM — varies with blade diameter selected, Specification Notes: Cutting depth at 45° is dependent on the blade diameter fitted; speak to IWM to confirm the figure relevant to your specified blade size.
    • Specification Name: Electrical Supply, Specification Value: 400V / 3-phase, Specification Notes: Three-phase supply is required — confirm available amperage with your electrician before installation, as the exact draw will depend on the motor option specified.
    • Specification Name: Machine Weight, Specification Value: Approx. 1,050–1,350 kg (varies by configuration), Specification Notes: At this weight, floor loading should be checked before installation — consult your structural engineer if the machine is not sited on a solid concrete ground floor.
    • Specification Name: Overall Dimensions, Specification Value: Varies by carriage length — confirm with IWM for the 3200 mm configuration, Specification Notes: Allow additional clearance beyond the machine footprint for full table travel, extraction pipework, and operator access on both the feed and outfeed sides.
    • Specification Name: Extraction Spigot Size, Specification Value: Confirm with IWM, Specification Notes: Confirm the spigot diameter when specifying so your extraction system can be correctly sized before delivery.
  • Product Gallery:
    • Image: Casolin Astra 500 3 axis panelsaw interior compartment with blue panel and white housing
    • Image: Casolin Astra 500 three-axis panelsaw motor and mechanical drive assembly cutaway view
    • Image: Casolin Astra 500 three-axis panel saw with sliding table and aluminium fence rail
    • Image: Orange handle on Casolin Astra 500 3 axis panelsaw fence rail with coiled air hose visible
    • Image: Casolin Astra 500 panelsaw cutting a 200mm thick timber beam with circular blade
A 3200 mm sliding table panel saw with three-axis CNC control over rip fence, blade height and blade tilt — built for joinery and cabinet shops that need repeatable results across batch production without the cost or footprint of a full beam saw.

Casolin Astra SE400 NT with electronic R/F and scoring

  • Chosen By List:
    • List Item: Cabinet makers and fitted furniture workshops that need clean, splinter-free cuts on veneered board and melamine as a matter of course
    • List Item: Joinery shops processing full sheets regularly and wanting the accuracy of electronic fence positioning without manual re-setting between batches
    • List Item: Small to mid-sized production workshops that need a reliable, well-built saw but are not yet at volumes that would justify a beam saw or automated panel cell
  • This Product List:
    • List Item: You're processing full sheets of veneered board, MFC, or melamine daily and chip-free cuts are non-negotiable — the independent scoring unit earns its place in that workflow
    • List Item: You want the accuracy of electronic fence positioning and the time saving that brings to batch work, without stepping up to a full CNC or beam saw
    • List Item: Your workshop handles a mix of panel sizing and angled cuts and needs a single saw that covers both reliably
    • List Item: You want cast-iron table stability and a solidly built machine that will hold its accuracy over years of use in a production environment
  • Alternate List:
    • List Item: Your cutting volumes are lower or your sheets are smaller — the <a href="index.php?option=com_content&view=article&id=72&catid=25">Robland Z300M</a> or <a href="index.php?option=com_content&view=article&id=69&catid=25">Robland FZ3100</a> may be better scaled to your throughput and floor space
    • List Item: You need a larger blade diameter or greater cutting depth for thick solid timber or engineered beams — discuss whether the <a href="index.php?option=com_content&view=article&id=64&catid=25">Casolin Astra 500</a> or <a href="index.php?option=com_content&view=article&id=75&catid=25">Robland Z500 M</a> is more appropriate
    • List Item: You work predominantly with solid timber rather than sheet material, where a scoring unit adds less value and a simpler configuration may suit better — consider the <a href="index.php?option=com_content&view=article&id=71&catid=25">Robland NXZ</a>
    • List Item: Budget is the primary constraint and electronic fence positioning is not essential to your workflow — a manual fence machine from the Robland range may be worth discussing with us
  • Key Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: Handles a full 2440 mm sheet with room to spare — relevant if you regularly rip standard sheet goods without trimming first.
    • Specification Name: Main Blade Diameter, Specification Value: 400 mm
    • Specification Name: Max Cutting Depth, Specification Value: 133 mm, Specification Notes: Sufficient for most panel and solid-timber joinery work; if you regularly cut thick glulam or deep section material, discuss your requirements with us.
    • Specification Name: Blade Tilt, Specification Value: 0–45°
  • Full Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: Heavy-duty aluminium construction — worth confirming floor space including full rearward extension of the table before installation.
    • Specification Name: Main Blade Diameter, Specification Value: 400 mm
    • Specification Name: Max Cutting Depth, Specification Value: 133 mm
    • Specification Name: Main Motor Power, Specification Value: 5.5 kW (7.5 hp), Specification Notes: This machine requires a three-phase supply — verify your workshop electrical capacity before ordering.
    • Specification Name: Scoring Blade Diameter, Specification Value: 120 mm
    • Specification Name: Scoring Motor, Specification Value: 0.75 kW (1 hp), Specification Notes: A dedicated scoring motor runs independently of the main blade, meaning scoring speed and depth can be set correctly without compromise to main blade performance.
    • Specification Name: Blade Tilt, Specification Value: 0–45°
    • Specification Name: Rip Fence, Specification Value: Electronic with digital control, Specification Notes: Digital positioning removes manual measurement and reduces setting time between cuts — particularly useful where you run repeated panel sizes across a batch.
    • Specification Name: Control Panel, Specification Value: Overhead
    • Specification Name: Saw Unit, Specification Value: Tilting
    • Specification Name: Main Table, Specification Value: Cast iron, Specification Notes: Cast iron provides better vibration damping and a flatter reference surface than fabricated steel — relevant to cut quality over long production days.
    • Specification Name: Frame Construction, Specification Value: Solid frame
    • Specification Name: Motor Configuration, Specification Value: Separate motors for main and scoring blades
    • Specification Name: Certification, Specification Value: CE compliant with safety guarding
    • Specification Name: Machine Weight, Specification Value: 900 kg, Specification Notes: At 900 kg, floor loading should be checked prior to installation — consult your structural engineer or building surveyor if in any doubt.
    • Specification Name: Overall Dimensions, Specification Value: Approx. 3330 mm (L) × 2700 mm (W) × 1450 mm (H), Specification Notes: Allow additional clearance beyond the sliding table extension for operator movement and outfeed support; confirm exact footprint with us before installation.
    • Specification Name: Extraction Connection, Specification Value: 120 mm diameter, Specification Notes: Check your existing extraction ducting matches this port size before installation — a reducer or adaptor may be needed.
    • Specification Name: Noise Level, Specification Value: Consult IWM, Specification Notes: A verified noise figure for this configuration is not published by the manufacturer — talk to us and we can advise whether acoustic treatment or a formal hearing protection policy is likely to be required in your workshop.
  • Product Gallery:
    • Image: Casolin Astra SE400 NT control panel showing red LED displays reading 4200 and 0.0, with function buttons and a stop control.
    • Image: Casolin Astra SE400 NT sliding table panel saw with rip fence, scoring unit, and control panel in a workshop
    • Image: Casolin Astra SE400 NT sliding table panel saw with electronic rip fence and scoring unit, shown in white and blue
A solidly built Italian panel saw with a 3200 mm sliding table, independent scoring unit, and electronic rip fence — suited to cabinet makers and joinery shops that need chip-free, repeatable cuts on sheet material day in, day out.

CNC Routers

CNC routers allow a workshop to machine panels, frames, and complex joinery components to a consistent, repeatable standard — cutting out the variation that comes with hand-fed operations and freeing skilled staff for work that needs them. We supply both 3-axis and 5-axis machines to suit different levels of complexity and budget.

Our own Technos range is designed and supported in-house, which means we control the specification and can back it with genuine technical knowledge rather than passing you to a third-party distributor. Alongside the Technos machines, we can specify CNC routers from a range of other manufacturers depending on what your workshop actually needs.

If you are unsure whether a 3-axis or 5-axis machine is right for your production, or how to match table size and tooling to your typical workload, talk to us before committing to anything. Getting the specification right at the outset saves considerable cost and frustration later.

Dominion CP-16M panelsaw

  • Chosen By List:
    • List Item: Joinery shops processing sheet goods and solid timber who need consistent, accurate rip and cross-cuts day to day
    • List Item: Small to mid-size workshops where a 2600 mm sliding table covers the majority of panel sizes they work with
    • List Item: Businesses replacing an ageing panelsaw and looking for a straightforward cast-iron machine with separate scoring — without over-specifying
  • This Product List:
    • List Item: You need a solid, cast-iron sliding table panelsaw for day-to-day sheet and timber processing and do not require CNC or electronic fence positioning
    • List Item: Your typical panel sizes fall within a 2600 mm sliding table and a 1250 mm rip capacity — this machine covers the vast majority of joinery workshop work
    • List Item: You want independent scoring as standard without moving to a significantly larger or more complex machine
    • List Item: Budget and simplicity of operation are priorities and your volume does not justify a more automated format saw
  • Alternate List:
    • List Item: You regularly process panels beyond 2600 mm or need a longer sliding table — the Robland FZ3100 or Casolin Astra 500 3-axis offer greater capacity
    • List Item: Your workflow would benefit from electronic rip fence positioning and digital readout — the Casolin Astra SE400 NT with electronic R/F and scoring is worth discussing
    • List Item: You need a 3-axis or automated beam-saw style operation for higher-volume optimised cutting — the Casolin Astra 500 3-axis is the more appropriate specification
    • List Item: You are weighing up a mid-range alternative with a comparable footprint — the Robland NXZ or Robland Z500 M may be worth comparing directly with the CP-16M
  • Key Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 2600 mm, Specification Notes: Sufficient for processing full 2440 mm sheet materials with room to support the workpiece, though larger format panels may require outfeed support.
    • Specification Name: Max Cutting Depth (90°), Specification Value: 125 mm, Specification Notes: Adequate for most sheet goods and solid timber sections typically found in joinery production; double-stacking thicker sheet materials is not advised.
    • Specification Name: Rip Capacity, Specification Value: 1250 mm
    • Specification Name: Main Motor Power, Specification Value: 7.5 hp, Specification Notes: Confirm the phase and amperage requirements with IWM before ordering to ensure your electrical supply is compatible.
  • Full Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 2600 mm, Specification Notes: Sufficient for processing full 2440 mm sheet materials with room to support the workpiece, though larger format panels may require outfeed support.
    • Specification Name: Main Saw Blade Diameter, Specification Value: 400 mm
    • Specification Name: Max Cutting Depth at 90°, Specification Value: 125 mm, Specification Notes: Adequate for most sheet goods and solid timber sections typically found in joinery production; double-stacking thicker sheet materials is not advised.
    • Specification Name: Max Cutting Depth at 45°, Specification Value: 90 mm
    • Specification Name: Blade Tilt Range, Specification Value: 0–45°
    • Specification Name: Main Motor Power, Specification Value: 7.5 hp, Specification Notes: Confirm the phase and amperage requirements with IWM before ordering to ensure your electrical supply is compatible.
    • Specification Name: Scoring Blade Diameter, Specification Value: 120 mm
    • Specification Name: Scoring Motor Power, Specification Value: 0.75 hp, Specification Notes: Separate motors for main and scoring blades means the scoring unit can be set and run independently, which is important for clean chip-free cuts on veneered or laminated boards.
    • Specification Name: Table Dimensions, Specification Value: 900 x 1500 mm
    • Specification Name: Table Height, Specification Value: 850 mm
    • Specification Name: Rip Capacity, Specification Value: 1250 mm
    • Specification Name: Dust Extraction Outlet, Specification Value: 120 mm, Specification Notes: Confirm this matches your existing extraction ducting; a reducer or adaptor may be needed if your system runs a different spigot size.
    • Specification Name: Construction, Specification Value: Heavy-duty cast iron, Specification Notes: Speak to IWM about confirmed machine weight before installation if there is any doubt about your floor slab rating.
    • Specification Name: Certification, Specification Value: CE Certified, Specification Notes: Meets the essential health and safety requirements for machinery placed on the UK/EU market.
  • Product Gallery:
    • Image: Dominion CP-16M panelsaw with aluminium sliding carriage, ruler guides, and digital display unit in a workshop
    • Image: Close-up of a Dominion CP-16M panelsaw fence with a digital readout display showing 23326 and a metric ruler rail.
    • Image: Dominion CP-16M panel saw with sliding table, rip fence, and orange blade guard in a workshop showroom
A straightforward, cast-iron sliding table panelsaw built for day-to-day sheet and timber processing. Accurate rip and cross-cuts, independent scoring as standard, and no unnecessary complexity.

Dominion CP32-E panelsaw

  • Chosen By List:
    • List Item: Joinery shops and cabinet makers needing to break down full or oversized sheet materials cleanly and consistently
    • List Item: Workshops where a scoring blade is essential to avoid breakout on veneered or melamine-faced boards
    • List Item: Businesses stepping up from a lighter bench-top or contractor saw to a floor-standing machine with genuine industrial capacity
  • This Product List:
    • List Item: You need to crosscut full 2440 mm sheets and want the reassurance of a 3200 mm sliding table without moving to a larger footprint machine
    • List Item: Clean cuts on veneered or melamine-faced board are a regular requirement — the independent scoring unit handles this without a separate setup step
    • List Item: You want a cast-iron table construction at a mid-range price point rather than paying for features your volume does not justify
  • Alternate List:
    • List Item: You need a longer rip capacity or a larger crosscut stroke — the Casolin Astra 500 or Robland Z500 M may offer more working envelope for larger panel formats
    • List Item: Your production volume demands faster, programmable fence positioning — the Casolin Astra SE400 NT with electronic rip fence and scoring is worth discussing for higher-throughput environments
    • List Item: You are processing a high daily volume of sheet materials and need 3-axis control or automated stops — the Casolin Astra 500 3-axis is the step up to consider
    • List Item: Your budget is tighter and your sheet sizes are smaller — the Robland FZ3100 or Robland NXZ may cover your requirements at a lower investment
  • Key Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm, Specification Notes: A 3200 mm table will comfortably handle a full 2440 mm sheet with room for support, which is the practical minimum for reliable full-sheet crosscutting.
    • Specification Name: Max Cutting Depth (90°), Specification Value: 125 mm, Specification Notes: Sufficient for solid timber sections and all standard sheet materials, including doubled-up boards or thick worktop substrates.
    • Specification Name: Rip Capacity, Specification Value: 1250 mm, Specification Notes: Covers ripping a standard 2440 × 1220 mm sheet down the centre, which is the most common first-cut operation in panel processing.
    • Specification Name: Main Motor Power, Specification Value: 7.5 hp, Specification Notes: Confirm your workshop's electrical supply phase and amperage with IWM before ordering to ensure compatibility.
  • Full Specifications:
    • Specification Name: Sliding Table Length, Specification Value: 3200 mm
    • Specification Name: Main Saw Blade Diameter, Specification Value: 400 mm
    • Specification Name: Max Cutting Depth at 90°, Specification Value: 125 mm
    • Specification Name: Max Cutting Depth at 45°, Specification Value: 100 mm
    • Specification Name: Main Motor Power, Specification Value: 7.5 hp, Specification Notes: Phase and amperage requirements should be confirmed with IWM before specifying — your workshop supply must be compatible.
    • Specification Name: Scoring Blade Diameter, Specification Value: 120 mm
    • Specification Name: Scoring Motor Power, Specification Value: 0.75 hp, Specification Notes: The scoring motor runs independently of the main blade, meaning scoring height and speed can be set correctly without affecting the primary cut.
    • Specification Name: Blade Tilt Range, Specification Value: 0–45°
    • Specification Name: Rip Capacity, Specification Value: 1250 mm
    • Specification Name: Table Dimensions, Specification Value: 900 × 1500 mm
    • Specification Name: Table Height, Specification Value: 850 mm
    • Specification Name: Table Construction, Specification Value: Cast iron, Specification Notes: Cast iron provides the mass and rigidity needed to dampen vibration during the cut, which directly affects edge quality and long-term fence accuracy.
    • Specification Name: Dust Extraction Outlet, Specification Value: 120 mm, Specification Notes: Check that your existing extraction ducting can accept a 120 mm spigot, or budget for a reducer if connecting to a larger central system.
    • Specification Name: Separate Motors (Main & Scoring), Specification Value: Yes, Specification Notes: Independent motors allow the scoring unit to be optimised for chip-free entry cuts without any compromise to main blade speed or power.
    • Specification Name: CE Compliant, Specification Value: Yes
    • Specification Name: Machine Weight, Specification Value: Contact IWM to confirm, Specification Notes: Speak to us before installation — machines of this class typically require a check on workshop floor loading capacity.
    • Specification Name: Overall Footprint (with table extended), Specification Value: Contact IWM to confirm, Specification Notes: Allow additional clearance to the left of the machine for the full travel of the sliding table, and clear infeed/outfeed space for sheet-length material.
  • Product Gallery:
    • Image: Aluminium fence rail and locking clamp assembly on a Dominion CP32-E panelsaw surface
    • Image: Dominion CP32-E panelsaw digital readout display showing 725.49, mounted on the sliding carriage rail
    • Image: Dominion CP32-E panelsaw with aluminium sliding fence rail, digital readout display, and a red powder fire extinguisher on the workshop wall behind.
    • Image: Dominion CP-32E panel saw control panel with main saw, scoring saw, and emergency stop buttons in a woodworking workshop
A cast-iron sliding table panelsaw built for joinery shops and cabinet makers who need to process full sheet materials accurately, day in, day out. The 3200 mm table and independent scoring unit make it a practical, proven choice for workshops cutting veneered or melamine-faced boards alongside solid timber.

Joinery Workshop

Joinery Workshop · IWM

The machines in your workshop determine how fast you work.

A well-specified joinery workshop builds around machines that work together. The wrong combination — or the wrong capacity for your volume — creates bottlenecks that no amount of operator skill will fix.

/ The Challenge

The wrong spec. A decade of bottlenecks.

/ Our Position

Machinery decisions in a joinery workshop tend to be permanent. You're not replacing a planer every three years — you're living with the choice for a decade. Getting the specification wrong at the start, or when you're scaling up, is an expensive mistake.

We've been specifying joinery workshop machinery for British workshops since 1974. We carry a wide range specifically because every workshop's needs are different — and we'd rather take longer to find the right fit than move a machine quickly.

Our Joinery Workshop Range

/ Why IW Machines

Why joinery workshops keep coming back.

Specifying a workshop is a once-in-a-decade decision. We treat it like one.

  • Fifty years on the workshop floor.

    - 01

    Three generations of specifying machinery for British joinery. We've seen the trends pass; we know which manufacturers still build to last and which ones look better in a brochure than they do after two years.

  • UK-wide delivery and commissioning.

    - 02

    Our engineers install, calibrate and train your team on-site. Anywhere in the UK, typically within four weeks of order confirmation.

  • A range that covers the full workshop.

    - 03

    From bandsaws and panel saws to spindle moulders, planers, and tenoners — we can specify an entire workshop or a single replacement machine. Direct relationships with manufacturers across the range.

  • Consultative, not commission-driven.

    - 04

    We will recommend the smaller machine if it's the right one. We will tell you to wait. The relationship matters more than the order.

Get expert advice

/ Ready when you are

Ready to improve your
workshop's output?

Book a specification call with one of our engineers. Thirty minutes, no obligation, plain English advice on what would actually work on your floor.

Or call directly...

Mon-Fri · 08:00-17:00
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Specification enquiries

Joinery Workshop Machines

A well-specified joinery workshop is built around a core set of machines that work together: a planer thicknesser for preparing stock, a table saw for breaking down sheet and section, a spindle moulder or moulder for profiling, and a tenoner or mortiser for jointing. Getting those basics right — the right capacity, the right working widths, the right combination for your workflow — is what determines how efficiently your workshop actually runs day to day.

The difference between a cramped, awkward workshop and a productive one usually isn't budget. It's specification. The wrong machine for your volume, or the wrong sequence of operations, creates bottlenecks that no amount of operator skill will fix.

We've been specifying joinery workshop machinery for British workshops for fifty years. If you're setting up from scratch, expanding, or replacing ageing equipment, talk to us before you commit to anything — we'd rather help you get it right than sell you a machine that doesn't fit.

LUNA 1000 PRO

  • Chosen By List:
    • List Item: Joinery and cabinet shops that need to finish a broad mix of panel sizes without stopping to reconfigure
    • List Item: Production workshops where throughput matters and a single sanding pass needs to do serious work
    • List Item: Operations that have outgrown a two-head machine and need more sanding stages in one pass
  • This Product List:
    • List Item: Your maximum workpiece width falls at or below 1000 mm and you do not regularly process wider panels
    • List Item: You need four sanding stages in a single pass and want to achieve that within a 1000 mm working envelope
    • List Item: Your workshop can accommodate the footprint and has confirmed three-phase supply at 380 V
    • List Item: You want a proven oscillating multi-station machine without stepping up to the wider 1300 mm class
  • Alternate List:
    • List Item: You regularly process panels or glued-up boards wider than 1000 mm — the LUNA 1300 PRO, MOSTRO 1300 2U, or MORBIDO 1300 all offer a 1300 mm working width
    • List Item: Your throughput demands are lower and a two-station machine would suffice — the MOSTRO 1300 2U may offer more capacity than you need at lower cost; talk to us about which configuration fits your actual volume
    • List Item: You are looking at the 1300 WSM — note that this is a fundamentally different machine designed to create brushed and naturally aged surface textures, not a conventional wide belt sander; if decorative finishing is your requirement, discuss the 1300 WSM with us directly to see whether it fits alongside or instead of a belt sander in your process
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: 10–1000 mm
    • Specification Name: Sanding Stations, Specification Value: 4 × double-sided, oscillating, Specification Notes: Four stations means four sequential sanding actions in a single pass — useful where you need to move through multiple grits or achieve a fine finish without multiple runs through the machine.
    • Specification Name: Max Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Product Thickness, Specification Value: 10–160 mm
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: 10–1000 mm
    • Specification Name: Product Thickness, Specification Value: 10–160 mm
    • Specification Name: Minimum Product Length, Specification Value: 400 mm
    • Specification Name: Maximum Product Length, Specification Value: Unlimited
    • Specification Name: Sanding Stations, Specification Value: 4 × double-sided, oscillating
    • Specification Name: Max Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 8.2 kW, Specification Notes: Confirm your supply can support this draw before ordering — three-phase installations vary in available capacity.
    • Specification Name: Voltage, Specification Value: 380 V, three-phase, Specification Notes: Three-phase supply is required; confirm availability at your premises before specifying.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 3180 × 1670 × 2300 mm, Specification Notes: Allow additional clearance beyond the machine footprint for infeed, outfeed, and operator access — a practical run length of at least the machine's own length on each end is recommended.
    • Specification Name: Machine Weight, Specification Value: 2,700 kg, Specification Notes: At this weight, floor loading capacity should be verified with your building's structural specification before installation.
  • Product Gallery:
    • Image: Baromak Luna 1000 Pro industrial machine with control panel, emergency stop button, conveyor feed, and blue spiral cables
    • Image: Baromak Luna 1000 Pro industrial machine with dual viewing windows, control panel, emergency stop buttons and slotted worktable
    • Image: Baromak Luna 1000 Pro industrial machine, a large grey and white enclosed unit with a dark viewing window and conveyor bed.
A four-station wide belt sander that takes panels and doors up to 1000 mm wide through rough and finish sanding in a single pass. Built for workshops that need consistent surface quality without running components through the machine twice.

LUNA 1300 PRO

  • Chosen By List:
    • List Item: Panel and board manufacturers running high daily volumes who need consistent surface quality without stopping to reconfigure between passes
    • List Item: Bespoke joinery and furniture workshops processing wide, solid-wood panels where multiple grit stages in a single pass saves significant time
    • List Item: Timber processors and contract finishers handling pieces of irregular or varying thickness who need a machine that can accommodate the full range without manual adjustment between jobs
  • This Product List:
    • List Item: You are processing wide panels or glued-up boards up to 1300mm and need the full width capacity with no compromise
    • List Item: Your throughput demands multiple grit stages in a single pass — the six sanding stations remove the need for separate finishing runs
    • List Item: You regularly work with material up to 160mm thick and need a machine that handles the full thickness range without reconfiguration
    • List Item: You are running a production or contract operation where conveyor speed and consistency matter more than compact footprint or lower capital cost
  • Alternate List:
    • List Item: Your working width requirement is 1000mm or below — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> will cover this with a smaller footprint and likely lower cost
    • List Item: You need fewer sanding stations and a simpler setup for lighter production volumes — the <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> or <a href="index.php?option=com_content&view=article&id=89&catid=29">1300 WSM</a> may be more appropriate starting points to discuss with us
    • List Item: You are looking at a two-station configuration as a cost-effective entry into wide-belt sanding — the <a href="index.php?option=com_content&view=article&id=97&catid=29">MOSTRO 1300 2U</a> or <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> are worth considering alongside this machine
    • List Item: Your workshop floor space or electrical supply cannot comfortably accommodate an 18 kW, 3,730 kg machine — talk to us and we can help you identify a more suitable specification
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: 10–1300 mm, Specification Notes: The full 1300mm capacity means wide panels and glued-up boards can be processed in a single pass, avoiding the re-jointing and misalignment risk of narrower machines.
    • Specification Name: Sanding Stations, Specification Value: 6 (double-sided, oscillating), Specification Notes: Six stations allow multiple grit sequences to be run in one pass, removing the need to feed material through separate machines or make repeat passes.
    • Specification Name: Conveyor Speed, Specification Value: Up to 20 m/min
    • Specification Name: Product Thickness, Specification Value: 10–160 mm, Specification Notes: The 160mm upper limit accommodates thick solid-wood blanks and laminated sections that narrower-capacity machines would not accept.
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: 10–1300 mm
    • Specification Name: Product Thickness, Specification Value: 10–160 mm
    • Specification Name: Minimum Product Length, Specification Value: 400 mm
    • Specification Name: Maximum Product Length, Specification Value: Unlimited
    • Specification Name: Sanding Stations, Specification Value: 6 (double-sided, oscillating)
    • Specification Name: Maximum Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 18 kW, Specification Notes: Confirm your site's supply capacity and protection devices with your electrician before ordering.
    • Specification Name: Electrical Supply, Specification Value: 380 V, three phase, Specification Notes: Three-phase supply is required — confirm availability at your premises before specifying.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 4580 × 1970 × 2300 mm, Specification Notes: Allow additional clearance beyond the footprint for infeed, outfeed, and extraction ducting — a practical floor allocation significantly larger than the machine envelope itself will be needed.
    • Specification Name: Machine Weight, Specification Value: 3,730 kg, Specification Notes: At this weight, floor loading capacity should be checked with a structural engineer before installation.
    • Specification Name: Manufacturer, Specification Value: BAROMARK
  • Product Gallery:
    • Image: Baromak LUNA 1300 PRO industrial laser cutting machine with enclosed work area and extended feed table
    • Image: Baromak Luna 1300 Pro industrial machine with control panel, warning labels, and gear mechanism on white background
    • Image: Baromak Luna 1300 Pro industrial laser cutting machine with dark grey and white enclosure on white background
Six oscillating sanding stations across a full 1300mm working width — built for production and contract workshops that need multiple grit stages completed in a single pass, without stopping to reconfigure between runs.

MORBIDO 1300

  • Chosen By List:
    • List Item: Joinery and panel shops processing wide boards or door blanks who need reliable thickness consistency without multiple passes
    • List Item: Workshops running mixed production where the ability to adjust each sanding station independently saves time when switching between jobs
    • List Item: Businesses stepping up from narrower or single-head machines who are finding their current equipment a bottleneck on wider work
  • This Product List:
    • List Item: You regularly process panels or components wider than 1000mm and need a machine built for that width as standard, not at the edge of its capacity
    • List Item: Your production benefits from two sanding stations that can be configured differently — for example, one calibrating and one finishing in the same pass
    • List Item: You need a minimum part length of 280mm, which covers most door and panel components without risking short-piece feed problems
    • List Item: Your workshop has the floor space and structural capacity to accommodate a machine of this size and weight
  • Alternate List:
    • List Item: Your work is predominantly under 1000mm wide — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> is a more proportionate choice and will take up less floor space
    • List Item: You need wide-format capacity but with more sanding heads or a higher-specification configuration — the <a href="index.php?option=com_content&view=article&id=97&catid=29">MOSTRO 1300 2U</a> or <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> may be worth comparing
    • List Item: Your volume or budget doesn't justify a two-station machine at this scale — the <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> may offer the width you need at a more suitable specification level
    • List Item: You have specific requirements around dust extraction integration, electrical supply, or workflow configuration that we haven't yet discussed — talk to us before specifying any model in this range
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: Up to 1300 mm
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable), Specification Notes: Independent adjustment means each head can be set for a different grit or pressure, allowing calibration and finishing to be handled in one pass rather than two separate machine setups.
    • Specification Name: Product Thickness Range, Specification Value: 6 mm – 160 mm
    • Specification Name: Max Conveyor Speed, Specification Value: 14 m/min, Specification Notes: Feed speed directly affects both finish quality and throughput — faster speeds suit calibration passes on engineered panels, slower speeds are typically used for fine finishing on solid timber.
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: Up to 1300 mm
    • Specification Name: Product Thickness Range, Specification Value: 6 mm – 160 mm
    • Specification Name: Minimum Working Length, Specification Value: 280 mm, Specification Notes: Components shorter than 280mm cannot be fed safely — worth confirming against your shortest regular workpiece before specifying.
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable), Specification Notes: Independent adjustment means each head can be set for a different grit or pressure, allowing calibration and finishing to be handled in one pass rather than two separate machine setups.
    • Specification Name: Max Conveyor Speed, Specification Value: 14 m/min, Specification Notes: Feed speed directly affects both finish quality and throughput — faster speeds suit calibration passes on engineered panels, slower speeds are typically used for fine finishing on solid timber.
    • Specification Name: Total Power Consumption, Specification Value: 8.9 kW, Specification Notes: Confirm your site's available supply and phase configuration with us before ordering — we can advise on electrical requirements as part of the specification process.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 3000 × 2280 × 1970 mm, Specification Notes: The 2280mm width is substantial — allow additional clearance on both infeed and outfeed sides for safe panel handling, particularly on wide stock.
    • Specification Name: Machine Weight, Specification Value: 1,850 kg, Specification Notes: At this weight, floor loading capacity should be verified with a structural engineer or your building's facilities manager before installation.
  • Product Gallery:
    • Image: Baromak Morbido 1300 CNC machine with control panel, emergency stop button, spindle unit, and extended feed table
    • Image: Baromak Morbido 1300 industrial machine with grey and dark grey casing, blue LED strips, red emergency stop button and a flat feed table.
    • Image: Baromak Morbido 1300 industrial roller grinding machine with open safety guard and CNC control panel
    • Image: Morbido 1300 industrial grinding machine with open safety guard, CNC control panel, gauges, and extended feed table
A two-station wide belt sander built for shops that need to calibrate and finish panels up to 1300mm wide in a single pass. Suited to joinery, panel processing, and door blank production where consistency across the full width matters.

MOSTRO 1000 2U

  • Chosen By List:
    • List Item: Panel and door manufacturers processing wide boards who need a reliable calibration pass before finishing
    • List Item: Joinery and cabinet shops that sand a variety of thicknesses in the same run and need two independently adjustable heads to achieve it in one pass
    • List Item: Production workshops where throughput matters and a 20 m/min conveyor speed means the machine won't become the bottleneck
  • This Product List:
    • List Item: Your standard panel or board width sits at or below 1000 mm and you don't routinely need to process wider material
    • List Item: You need to calibrate and finish in a single pass — the two independent heads let you run different grits simultaneously without a second machine
    • List Item: Your workshop runs a mix of thicknesses across the day and needs a machine that handles 3 mm veneered panels and 160 mm solid sections without reconfiguration
    • List Item: You have the three-phase supply and floor space to accommodate a production-grade machine and want the throughput that comes with it
  • Alternate List:
    • List Item: You regularly process material wider than 1000 mm — the MOSTRO 1300 2U or MOSTRO 1300 2U S would be the natural step up and are worth comparing directly
    • List Item: Your volumes are lower or your floor space more limited — the LUNA 1000 PRO may offer a more appropriate specification at a smaller footprint; talk to IWM about where the crossover point sits for your production
    • List Item: You need wider capacity with a softer, more compliant sanding action — the MORBIDO 1300 is designed with that in mind and may suit certain finishing applications better
    • List Item: You are unsure whether a 1000 mm or 1300 mm working width better matches your future workload — this is worth discussing with IWM before committing, as upsizing after installation is not straightforward
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: 1000 mm, Specification Notes: Sets the maximum panel or board width the machine will accept — components wider than this must be run in two passes or require a wider machine such as the MOSTRO 1300 2U.
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable), Specification Notes: Each head can be set to a different grit or pressure, allowing calibration and finishing to be combined in a single pass rather than two separate operations.
    • Specification Name: Conveyor Speed, Specification Value: Up to 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 28.97 kW, Specification Notes: This is a 400V three-phase machine drawing significant current — confirm your supply capacity and distribution board headroom with your electrician before ordering.
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: Up to 1000 mm
    • Specification Name: Material Thickness, Specification Value: 3 mm – 160 mm, Specification Notes: The 3 mm minimum is worth checking against your thinnest components — very thin stock can be prone to snatching on wide belt machines; discuss your material profile with IWM if this is a concern.
    • Specification Name: Minimum Product Length, Specification Value: 400 mm (working length from 450 mm), Specification Notes: Shorter components than this cannot be guaranteed to track consistently through the machine.
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable)
    • Specification Name: Sanding Unit Roller Diameter, Specification Value: 190 mm
    • Specification Name: Max Thickness Reduction per Pass, Specification Value: 0.5 mm
    • Specification Name: Max Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 28.97 kW
    • Specification Name: Voltage, Specification Value: 400 V, Specification Notes: Three-phase supply required — confirm availability at your site before specifying.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 2060 × 1710 × 2150 mm, Specification Notes: The 1710 mm width is the machine body alone — allow additional clearance on both the infeed and outfeed sides for the longest components you intend to run.
    • Specification Name: Total Machine Weight, Specification Value: 2,093 kg, Specification Notes: At over 2 tonnes, floor loading should be assessed before installation — consult a structural engineer if your workshop floor is not a ground-bearing concrete slab.
    • Specification Name: Manufacturer, Specification Value: Baromak
    • Specification Name: Abrasive Belt Details, Specification Value: Contact IWM for belt specification, Specification Notes: Abrasive belt dimensions and recommended grit range should be confirmed with IWM at the point of enquiry, as these may vary by configuration — using the correct belt specification is important for both finish quality and belt life.
    • Specification Name: Extraction Connection, Specification Value: Contact IWM for extraction specification, Specification Notes: Extraction connection size and minimum airflow requirement should be confirmed with IWM before planning your ducting — under-specified extraction on a machine of this width will affect both surface finish and dust compliance.
    • Specification Name: Motor Configuration, Specification Value: Contact IWM for motor breakdown, Specification Notes: Individual head and conveyor motor ratings are available from IWM on request — useful if you need to verify distribution board loading per circuit.
  • Product Gallery:
    • Image: Baromak MOSTRO 1000 2U industrial sanding machine with conveyor feed, control panel, and blue coiled air hose on grey background
    • Image: Baromak Mostro 1000 2U wide belt sanding machine with open top cover, conveyor belt, and blue pneumatic hose
    • Image: Baromak MOSTRO 1000 2U industrial sanding machine with conveyor belt, blue pneumatic tubing and red emergency stop button
A production-grade dual-station wide belt sander for workshops that need to calibrate and finish panels up to 1000 mm wide in a single pass. Built for consistent throughput where stopping to change grits or swap machines costs time you don't have.

MOSTRO 1300 2U

  • Chosen By List:
    • List Item: Joinery and panel shops running wide boards or MDF components who need calibration and finishing done in one pass rather than two separate operations
    • List Item: Production environments where throughput matters — the 20 m/min conveyor speed and large working width support continuous flow rather than batch feeding
    • List Item: Workshops processing material with variable incoming thickness, where the 0.5 mm-per-pass reduction capability helps bring stock to a consistent dimension before finishing
  • This Product List:
    • List Item: You need to calibrate and finish wide panels or solid timber in a single machine pass — the two independent stations remove the need for a separate calibrating sander upstream
    • List Item: Your working width regularly reaches or exceeds 1000 mm and you cannot afford to run material through twice
    • List Item: Your production volume justifies the installed power and floor space this machine demands, and you have three-phase supply with sufficient capacity
    • List Item: Consistent thickness across large panels is critical to your downstream processes — joinery assembly, veneering, or coating, for example
  • Alternate List:
    • List Item: Your working width rarely exceeds 1000 mm — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> will cover most of your work at a smaller footprint and lower power demand
    • List Item: You need dual-station capability but also require a different head configuration — ask the IWM team about the <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U S</a> variant, as station configuration differs between the two models and the right choice depends on your specific finishing requirement
    • List Item: Your volume is lower or your material range is narrower — the <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> or <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> may be a more proportionate fit without the power and weight overhead of this machine
    • List Item: Your workshop floor loading or electrical supply cannot accommodate this machine's demands — discuss the <a href="index.php?option=com_content&view=article&id=89&catid=29">1300 WSM</a> or LUNA range as alternatives with the IWM team
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: 1300 mm, Specification Notes: Sets the maximum panel or board width the machine will accept — material wider than this cannot be processed in a single pass.
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable), Specification Notes: Independent adjustment means each head can be set for a different function — typically one for calibration, one for finishing — without resetting between passes.
    • Specification Name: Max Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 57.55 kW, Specification Notes: This is a substantial power demand on a 400 V three-phase supply — confirm available amperage with your electrician before ordering.
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: 1300 mm
    • Specification Name: Min Product Thickness, Specification Value: 3 mm
    • Specification Name: Max Product Thickness, Specification Value: 160 mm
    • Specification Name: Minimum Product Length, Specification Value: 400 mm, Specification Notes: Shorter workpieces than 400 mm cannot be fed; working length (the minimum for the machine to engage properly) starts at 450 mm.
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable)
    • Specification Name: Max Thickness Reduction per Pass, Specification Value: 0.5 mm
    • Specification Name: Sanding Roller Diameters, Specification Value: 240 mm and 210 mm
    • Specification Name: Max Conveyor Speed, Specification Value: 20 m/min
    • Specification Name: Total Installed Power, Specification Value: 57.55 kW, Specification Notes: Confirm three-phase supply capacity with your electrician prior to installation — this is a high power demand.
    • Specification Name: Voltage, Specification Value: 400 V (three-phase)
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 2530 × 2100 × 2380 mm, Specification Notes: Allow additional clearance beyond the machine footprint for infeed and outfeed runs suited to your longest workpiece, plus extraction ducting and operator access on both sides.
    • Specification Name: Total Machine Weight, Specification Value: 3,270 kg, Specification Notes: At this weight, floor loading capacity must be verified with a structural engineer before siting — this is well above the threshold for standard industrial slab assumptions.
  • Product Gallery:
    • Image: Baromak MOSTRO 1300 2U industrial wide belt sanding machine with blue coiled air hose and control panel
    • Image: Baromak Mostro 1300 2U industrial wide belt sanding machine with open hood, conveyor belt, and blue accent columns
    • Image: Baromak Mostro 1300 2U industrial sanding machine with feed conveyor, blue trim, and coiled air hose on a grey background
A dual-station wide belt sander that takes panels and solid timber up to 1300 mm wide from rough stock to finished surface in a single pass. Built for workshops where throughput is high and stopping to reset between calibration and finishing is not an option.

MOSTRO 1300 2U S

  • Chosen By List:
    • List Item: Panel and door manufacturers who need consistent thickness calibration across wide boards without multiple passes
    • List Item: Joinery and furniture workshops processing large glued-up blanks or solid timber slabs where surface finish quality is critical
    • List Item: Production environments where reducing between-stage handling time matters and a single-pass calibrate-and-finish capability justifies the investment
  • This Product List:
    • List Item: You regularly sand or calibrate workpieces wider than 1000mm and need a 1300mm capacity as standard
    • List Item: You want calibration and finish sanding to happen in a single pass — the two independent stations make this possible without re-feeding
    • List Item: Your volume justifies a machine in this weight class and you have the three-phase supply and floor space to support it
    • List Item: You are producing doors, wide panels, or glued-up slabs where consistent surface quality across the full width is non-negotiable
  • Alternate List:
    • List Item: Your workpieces are consistently under 1000mm wide — the <a href="index.php?option=com_content&view=article&id=93&catid=29">LUNA 1000 PRO</a> or <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> may be more appropriately sized for your throughput
    • List Item: You need 1300mm capacity but your volume does not justify two sanding stations — the <a href="index.php?option=com_content&view=article&id=98&catid=29">MOSTRO 1300 2U</a> (single-station variant) or <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> may be worth comparing on cost and footprint
    • List Item: Your workshop has limited floor space or a restricted three-phase supply — the <a href="index.php?option=com_content&view=article&id=94&catid=29">LUNA 1300 PRO</a> is worth discussing as a potentially more compact alternative; talk to us about your supply constraints
    • List Item: You are primarily calibrating rather than finish-sanding and a simpler single-head machine would meet your needs — talk to us and we can compare the <a href="index.php?option=com_content&view=article&id=95&catid=29">MORBIDO 1300</a> against this model for your specific application
  • Key Specifications:
    • Specification Name: Working Width, Specification Value: 1300 mm
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable), Specification Notes: Independent adjustment means each head can be set for a different grit or cut depth, allowing calibration and finishing in one pass rather than two separate operations.
    • Specification Name: Product Thickness Range, Specification Value: 6 mm – 160 mm
    • Specification Name: Max Conveyor Speed, Specification Value: 14 m/min
  • Full Specifications:
    • Specification Name: Working Width, Specification Value: 1300 mm
    • Specification Name: Product Thickness Range, Specification Value: 6 mm – 160 mm
    • Specification Name: Minimum Working Length, Specification Value: 450 mm, Specification Notes: Shorter components below 450mm will not feed reliably — worth confirming against your shortest workpiece before specifying.
    • Specification Name: Sanding Stations, Specification Value: 2 (independently adjustable), Specification Notes: Independent adjustment means each head can be set for a different grit or cut depth, allowing calibration and finishing in one pass rather than two separate operations.
    • Specification Name: Max Thickness Reduction per Pass, Specification Value: 0.5 mm
    • Specification Name: Max Conveyor Speed, Specification Value: 14 m/min
    • Specification Name: Total Power Consumption, Specification Value: 27.03 kW, Specification Notes: This is a three-phase machine — have your electrician confirm your workshop supply capacity and available amperage against the 27.03 kW total draw before ordering.
    • Specification Name: Machine Dimensions (L × W × H), Specification Value: 2530 × 2100 × 2380 mm, Specification Notes: The 1300mm working width means infeed and outfeed clearance of at least the length of your longest workpiece is needed on both sides — plan the floor layout accordingly.
    • Specification Name: Machine Weight, Specification Value: 2,970 kg, Specification Notes: At nearly 3 tonnes, floor loading must be checked before installation — consult a structural engineer if you are on a suspended or older industrial floor.
  • Product Gallery:
    • Image: Baromak Mostro 1300 2U S industrial machine with blue accent columns, textured feed table, and transparent safety enclosure
    • Image: Baromak MOSTRO 1300 2U S industrial wide belt sanding machine with touchscreen panel and blue coiled air hose
    • Image: Baromak MOSTRO 1300 2U S industrial belt sanding machine with open access panel revealing internal components
A 1300mm wide-belt sander with two independently adjustable sanding stations, built for workshops that need to calibrate and finish in a single pass. The right choice when consistent surface quality across wide panels or glued-up slabs is non-negotiable.

Our Technos 2132 HD Nesting CNC Router

  • Chosen By List:
    • List Item: Joinery and fitted furniture workshops that regularly run full 2440×1220mm sheets and need consistent, repeatable results across batches
    • List Item: Panel processing operations where downtime between tool changes or manual board positioning is a measurable production cost
    • List Item: Businesses moving from manual or semi-manual routing who want a machine that can be programmed and managed from an office CAD/CAM workstation
  • This Product List:
    • List Item: You are regularly processing full-size or near-full-size sheet material and the smaller Technos HD table sizes would require frequent board trimming before machining
    • List Item: Your programs involve multiple tooling operations in a single run and manual tool changes are currently adding time or introducing inconsistency
    • List Item: You need to manage programs centrally from a CAD/CAM office setup and load jobs to the machine over a network without walking files to the machine
    • List Item: Your volume justifies the floor space and investment of the largest table in the HD Series — if you are running lower sheet volumes, a smaller HD model may give you the same capability at a more appropriate scale
  • Alternate List:
    • List Item: Your typical sheet sizes are smaller than full-size and a reduced-table Technos HD model — such as the Technos 1632 HD — would cover your work without the larger footprint; discuss the options with IWM
    • List Item: Your workshop floor area is constrained and cannot accommodate the full footprint of the 2132 HD including loading clearances — the Technos 1632 HD is worth considering
    • List Item: Your volume is lower and you do not need automatic tool changing or full 8-zone vacuum — a simpler specification such as the Technos ECO Series may represent better value for your operation
    • List Item: Your electrical supply cannot support this machine's power requirements without significant upgrade — confirm supply capacity with IWM before specifying this model
  • Key Specifications:
    • Specification Name: Table Size, Specification Value: 2100 × 3200 mm, Specification Notes: Accommodates standard full-size sheet material; allow additional clearance around the machine perimeter for board loading and operator movement.
    • Specification Name: Spindle Power, Specification Value: 9 kW, Specification Notes: Inverter-driven with variable speed up to 24,000 rpm, allowing the machine to be matched to different tooling and material types without manual head changes.
    • Specification Name: Tool Carousel, Specification Value: 8-position (gantry-mounted), Specification Notes: Automatic tool changes during program execution reduce mid-run stoppages and allow complex multi-operation jobs to run unattended.
    • Specification Name: Vacuum Holding, Specification Value: 2 × EuroVac 250 m³/h pumps, 8-zone matrix bed, Specification Notes: Zoned control means vacuum is only applied where needed, maintaining hold-down on smaller nested parts without requiring a full-bed seal.
  • Full Specifications:
    • Specification Name: Table Size, Specification Value: 2100 × 3200 mm, Specification Notes: Accommodates standard full-size sheet material; allow additional clearance around the machine perimeter for board loading and operator movement.
    • Specification Name: Spindle Power, Specification Value: 9 kW
    • Specification Name: Spindle Speed, Specification Value: Variable, up to 24,000 rpm
    • Specification Name: Spindle Drive, Specification Value: Inverter-driven
    • Specification Name: Tool Carousel, Specification Value: 8-position, gantry-mounted, Specification Notes: Rear-mounted position keeps the carousel within the machine footprint and allows tool changes without gantry travel to a separate station.
    • Specification Name: Tool Probe, Specification Value: Fixed, rear-mounted, Specification Notes: Automatically sets depth offsets for each tool, removing the need for manual measurement and reducing the risk of depth errors when tools are changed mid-program.
    • Specification Name: Axis Drives, Specification Value: Yaskawa Absolute Servo drives, all axes
    • Specification Name: Axis Transmission, Specification Value: Servo motors on precision helical racks
    • Specification Name: Rapid Axis Speed, Specification Value: 50 m/min
    • Specification Name: Vacuum System, Specification Value: 2 × EuroVac 250 m³/h pumps
    • Specification Name: Vacuum Bed, Specification Value: 8-zone automatically controlled matrix bed
    • Specification Name: Sacrifice Board, Specification Value: MDF required, Specification Notes: The MDF sacrifice board protects the matrix bed surface from tool breakthrough; this is a consumable that will need periodic replacement and should be factored into running costs.
    • Specification Name: Automatic Stops, Specification Value: Two-face board location stops, Specification Notes: Ensures consistent board registration every cycle without manual alignment, which directly affects part accuracy on nested jobs.
    • Specification Name: Controller, Specification Value: Syntec FC 60WA, Specification Notes: Keyboard and mouse operated; supports USB and network program transfer, so jobs can be sent directly from an office CAD/CAM workstation without moving files manually.
    • Specification Name: Program Storage, Specification Value: Hundreds of programs with directory organisation
    • Specification Name: Program Transfer, Specification Value: USB or network connection
    • Specification Name: Installation, Specification Value: IWM engineer installation with Leica AT401 laser levelling across 6 points, Specification Notes: Laser levelling at installation compensates for uneven workshop floors, which is particularly relevant in older timber-framed or concrete-slab premises.
    • Specification Name: Warranty, Specification Value: 12 months standard
    • Specification Name: Electrical Supply, Specification Value: Confirm with IWM at enquiry stage, Specification Notes: Phase and amperage requirements must be confirmed before planning installation; contact IWM to ensure your supply is adequate for this machine.
    • Specification Name: Machine Dimensions, Specification Value: Confirm with IWM at enquiry stage, Specification Notes: Overall footprint including gantry overtravel must be confirmed with IWM before finalising workshop placement and extraction routing.
    • Specification Name: Machine Weight, Specification Value: Confirm with IWM at enquiry stage, Specification Notes: Weight must be confirmed with IWM so that workshop floor loading capacity can be checked before installation is planned.
    • Specification Name: Extraction Connection, Specification Value: Confirm with IWM at enquiry stage
  • Product Gallery:
    • Image: Technos Flex 3075 CNC router machine with a large blue and white frame and grid cutting bed
The largest table in the Technos HD Series, built for workshops that process full-size sheet material day in, day out. Eight-position automatic tool changing and an 8-zone vacuum bed mean complex nested jobs run with minimal intervention.

Panel Saws

Panel saws — often called sliding table saws — are the standard choice for breaking down large sheets of timber, MDF, plywood, and similar panel materials cleanly and accurately. The sliding table carries the workpiece past the blade in a controlled, repeatable movement, which is what makes them so well suited to production work and batch cutting alike.

Most machines combine a main saw blade with a lower scoring blade. The scorer cuts a shallow kerf just ahead of the main blade, which prevents the face veneer or laminate from breaking out and leaves both faces of the panel looking clean. It is a straightforward feature, but one that matters a great deal when the finish of the cut is visible in the final product.

Panel saws are available across a wide range of sizes and specification levels — from compact, manually operated machines suited to smaller workshops through to larger format saws with programmable fences for higher-volume operations. Choosing the right size and configuration depends on your sheet sizes, output requirements, and the space available in your workshop.

If you are unsure which specification suits your needs, talk to us. We have been helping UK workshops specify the right machinery for fifty years, and we are happy to work through the options with you.