Falach Five Bag Carousel Units
Falach ·Briquette & Wood Waste
Turns your Falach press into a hands-off bagging line. Briquettes fill five 20–25 kg bags automatically — no separate motor, no operator standing over it.
Before you commit
Send us a sample - we’ll test your material first
Not all waste streams briquette equally. Moisture content, particle size, and material mix all affect output quality and briquette consistency. We’ll run your material on the machine and report back before you make any decision.
Key specification considerations
Bag Capacity
5 × 20–25 kg bags
With a Falach 50 running at 50 kg/hour, all five bags fill in approximately 2 hours — useful for planning how often an operator needs to swap out completed bags.
Bag Fill Weight
Approx. 20–25 kg per bag
Final weight varies with material density, so denser hardwood briquettes will typically reach the upper end of this range.
External Drive Required
None — powered by the press
The carousel draws its operation directly from the connected Falach press, so no additional electrical supply or motor is needed at the bagging point.
Compatible Presses
Falach 30, 35, 50, 70 and 100
Two carousel variants are available — one sized for 50 mm briquettes (Falach 30, 35, 50) and one for 70 mm briquettes (Falach 70, 100) — confirm which applies when specifying.
| Specification | Value | Notes |
|---|---|---|
Bag Capacity | 5 × 20–25 kg bags | |
Bag Fill Weight | Approx. 20–25 kg per bag (material-dependent) | |
External Drive Required | No — powered directly by the press | |
Fill Method | Automatic — briquettes drop directly into each bag in sequence | |
Briquette Diameter | 50 mm or 70 mm (two variants available) | Specify your press model when enquiring so the correct carousel variant is supplied. |
Weight | 200 kg | At 200 kg, floor loading is unlikely to be a concern in most workshop settings, but check if positioning on a raised or suspended floor. |
Dimensions | Confirmed during consultation with IWM | Contact IWM before installation to confirm floor footprint and clearance requirements for your specific unit and press combination. |
Compatible Presses | Falach 30, 35, 50, 70 and 100 | |
Bag Supply | Bags available in boxes of 200 from IWM | Sourcing bags direct from IWM ensures the correct size and fitment for the carousel — worth factoring into ongoing running costs. |
Assembly | Supplied fully assembled |
Is this the right
machine for you?
Choose the Falach Five Bag Carousel Units if...
- You are already running or specifying a Falach press (30, 35, 50, 70 or 100) and want to move to bagged output without adding a separate powered bagging system
- Your production volume suits the Falach range — at 50 kg/hour on the Falach 50, five 20–25 kg bags fill in around 2 hours, which works well for small-to-medium batch production
- You want a hands-off bagging process that frees up operator time during a press run, or you sell bagged briquettes and need a consistent, presentable bag weight for customers or trade accounts
Consider an alternate model if...
- You are not running a Falach press — the standard carousel is designed to be driven by the Falach press itself, though bespoke units can be made to fit other manufacturers' machines; talk to us if that applies to your setup
- Your output volume significantly exceeds what the Falach range produces — the Falach 100 tops out at around 100 kg/hour, and at that throughput or above, a higher-capacity bagging solution may suit you better; discuss your requirements with us
- You do not need bagged output — if loose briquettes feed directly into a hopper or bulk storage, the carousel adds unnecessary complexity to your setup
Still not sure? We're happy to help
/ Ready when you are
Ready to improve your
workshop's output?
Book a specification call with one of our engineers. Thirty minutes, no obligation, plain English advice on what would actually work on your floor.
Or call directly +44 (0)1636 918280
