Skip to main content
Woodworking Machines > Dust Extractor Units > Salvamac Mobile 1 to 4 Bagging Dust Extractors
Salvamac mobile bagging dust extractor with upper filter bag, lower collection bag, and metal frame on castors
Salvamac Air & Painting dual-bag dust extractor unit with two white filter bags and clear collection sacks on a metal frame
Salvamac mobile bagging dust extractor with white filter bag, clear collection sack, and electric motor on a steel frame
  • Salvamac mobile bagging dust extractor with upper filter bag, lower collection bag, and metal frame on castors
  • Salvamac Air & Painting dual-bag dust extractor unit with two white filter bags and clear collection sacks on a metal frame
  • Salvamac mobile bagging dust extractor with white filter bag, clear collection sack, and electric motor on a steel frame

Salvamac Mobile 1 to 4 Bagging Dust Extractors

Salvamac
A wheeled, three-phase dust extractor you can move between machines as you work — no ducting, no fixed installation. Available in 1, 2, 3, or 4 bag configurations to match your holding capacity and airflow needs.

Typically chosen by

  • Smaller joinery or timber workshops running one or two machines and needing a unit that can be moved between them
  • Workshops where a permanent ducted extraction system isn't practical or cost-justified
  • Operators who want a simple, low-maintenance dust collection solution with a reliable structure and easy bag changes
Get expert advice
Book a free demo

Key specification considerations

Bag Configuration
1 to 4 bags
The number of collecting bags affects total holding capacity before a changeover is needed — important if you're running extended production without stopping.
Mobility
Mobile (wheeled unit)
Designed to be repositioned between machines, which suits workshops where extraction doesn't need to be permanently plumbed in.
Airflow (range)
2,000 – 6,000 m³/h (model dependent)
Higher bag counts draw more airflow — confirm the required extraction volume against your machine's outlet spec before selecting a model.
Structural Warranty
10 years
Covers the hard steel frame specifically — worth noting if longevity of the chassis is a factor in your purchasing decision.
See full specifications
SpecificationValueNotes
Bag Configuration
1 to 4 collecting bags
Mobility
Mobile / wheeled
Structural Warranty
10 years (hard steel structure)
Motor Power
1.5 kW (1-bag) / 2.2 kW (2-bag) / 3.0 kW (3-bag) — varies by model
All models are three-phase 415V — confirm amperage against your workshop supply and isolator rating before ordering.
Extraction Volume / Airflow
2,000 m³/h (1-bag) to 3,500 m³/h (3-bag) — varies by model
Choose the bag count that meets or exceeds the combined extraction demand of the machines you'll be running from this unit.
Inlet Diameter
Ø 160–200 mm (model dependent)
Inlet size needs to match the outlet on your machines — confirm the specific model's inlet diameter before specifying.
Filter Type
Fabric filter sleeves with PVC collecting bags
Bag Closure System
Special closing ring
Manufacturer states bag changes take only a few seconds — useful in production environments where downtime for maintenance needs to be minimal.
Noise Level
approx. 68 dB(A) (varies by model)
68 dB(A) is broadly comparable to a normal conversation at close range — well within typical workshop tolerance and unlikely to require additional acoustic treatment.
Dimensions (L × W × H)
Varies by model — 2-bag unit approx. 1,730 × 580 × 2,460 mm
Allow additional clearance around the unit for bag access and any connected extraction hoses.
Weight
Varies by model — approx. 100–160 kg depending on bag count
ATEX / Certification
CE marked; not ATEX-rated
The Trolley Bag range is intended for standard indoor woodworking environments — if your application requires ATEX certification, speak to us about alternative Salvamac models designed for that purpose.
Get expert advice

Is this the right
machine for you?

Choose the Salvamac Mobile 1 to 4 Bagging Dust Extractors if...

  • You need a unit that can be moved between machines rather than fixed to a single position or ducted installation
  • Your workshop runs one or two woodworking machines and doesn't generate the volume of waste that would justify a larger, static extractor
  • Simplicity of maintenance matters — quick bag changes with minimal downtime suit your workflow
  • You want a robust, long-lasting structure and are specifying a unit for the long term in a smaller operation

Consider an alternate model if...

  • You're running multiple machines simultaneously and need higher airflow or centralised ducted extraction — speak to us about the Soukup Dust Extractor Unit, which may be better suited to higher-volume or fixed installations
  • Your dust or chip volume is substantial enough that bag collection becomes a frequent interruption — a larger static unit with a higher-capacity collection system may be more practical
  • You need a unit approved for use in ATEX-rated zones or environments with specific certification requirements — the Trolley Bag range is not ATEX-rated and is not suitable for those applications
Still not sure? We're happy to help
Get expert advice
Ready when you are

Ready to improve your
workshop's output?

Book a specification call with one of our engineers. Thirty minutes, no obligation, plain English advice on what would actually work on your floor.

Get expert advice
Book a free demo
Or call directly +44 (0)7970461899