Skip to main content
Woodworking Machines > Spray Booths > IWM - Wood Finishing Spray Booth With Extractor
Industrial wood finishing spray booth with overhead hanging rails, ventilation ducting, and an extractor unit in a workshop
Industrial wood finishing spray booth with extractor ducting and overhead hanging rails in a workshop
Airfog Defensor wall-mounted misting unit with pressure gauge and twin nozzle arms
  • Industrial wood finishing spray booth with overhead hanging rails, ventilation ducting, and an extractor unit in a workshop
  • Industrial wood finishing spray booth with extractor ducting and overhead hanging rails in a workshop
  • Airfog Defensor wall-mounted misting unit with pressure gauge and twin nozzle arms

IWM - Wood Finishing Spray Booth With Extractor

IWM
A low-footprint spraying enclosure for workshops applying water-based lacquers and stains. Keeps overspray out of the wider workshop without the cost or space demands of a permanent installation.

Typically chosen by

  • Joinery and cabinet shops applying water-based lacquers or stains who need to contain overspray without a dedicated spray room
  • Workshops looking for a low-cost, space-efficient way to meet basic finishing hygiene and fire-risk requirements
  • Facilities finishing smaller components or batches where a permanent installation would be disproportionate to the volume
Get expert advice
Book a free demo

Key specification considerations

Construction
Cardboard outer with textile filter lining
The textile lining captures spray particulates; this is a filtration aid, not a full extraction system — suitability for your process should be confirmed before ordering.
Finish Compatibility
Water-based paint only
Not rated for solvent-based finishes; using solvent paints in this booth would present a fire and health risk.
Overspray Control
Yes — partial filtration
Provides partial filtration of spray fumes and containment of particulates, reducing contamination of the wider workshop environment.
Extraction Control
Pneumatic — auto-reduces to 1/3 when gun is holstered
Suction automatically drops when the spray gun is hung on the adjacent stand, reducing energy consumption between coats without any manual adjustment.
See full specifications
SpecificationValueNotes
Construction — Outer
Cardboard
Construction — Inner Lining
Textile filter
Finish Compatibility
Water-based paint only
Not suitable for solvent-based coatings.
Overspray Containment
Yes
Fume Filtration
Partial
Partial filtration is not a substitute for full LEV (Local Exhaust Ventilation) compliance — check your COSHH obligations with your responsible person.
Extractor Included
Yes — pneumatic air suction through wall with air re-circulation
The pneumatic system controls suction through the booth wall; when the spray gun is holstered on the adjacent stand, suction automatically reduces to one-third of operational level.
Dimensions
Contact IWM to confirm
Dimensions vary by configuration — talk to us before planning your floor layout or extraction ducting.
Weight
Contact IWM to confirm
Electrical Supply Required
Contact IWM to confirm
Confirm supply requirements with IWM before installation to ensure your workshop consumer unit is adequately rated.
Filter Replacement / Consumables
Textile filter lining is a consumable — replacement interval depends on product type and finishing volume
Regular filter replacement is essential to maintain airflow and filtration performance; a clogged filter will reduce extraction efficiency and affect finish quality.
Get expert advice

Is this the right
machine for you?

Choose the IWM - Wood Finishing Spray Booth With Extractor if...

  • You are applying water-based finishes only and need a simple, low-footprint way to contain overspray
  • Your finishing volume is low to moderate and a permanent spraybooth installation is not justified
  • You need to protect the rest of your workshop from airborne particulates without major capital outlay
  • You are finishing smaller components or batches rather than large carcasses or panels

Consider an alternate model if...

  • You are using or intend to use solvent-based coatings — this booth is not rated for that application and you should discuss a compliant alternative with IWM
  • Your finishing output is high and you need a permanent, fully certified extraction solution with regulated airflow
  • You require full COSHH / LEV compliance documentation — consider discussing a purpose-built spraybooth specification with IWM
  • You are also looking at pre-finishing treatment — the IWM Impregnation & Basic Coating Bath may be relevant earlier in your process
Still not sure? We're happy to help
Get expert advice
Ready when you are

Ready to improve your
workshop's output?

Book a specification call with one of our engineers. Thirty minutes, no obligation, plain English advice on what would actually work on your floor.

Get expert advice
Book a free demo
Or call directly +44 (0)7970461899