Skip to main content
Woodworking Machines > Timber Frame & SIP Machinery > Soukup - Framer Profi Wood House Technology
3D render of a timber frame floor panel system with blue hydraulic connectors along the side, used in wood house construction
  • 3D render of a timber frame floor panel system with blue hydraulic connectors along the side, used in wood house construction

Soukup - Framer Profi Wood House Technology

Soukup
A continuous-production assembly line for timber frame panel manufacturers moving beyond single-table setups. Handles walls, roofs, ceilings, and opening frames — up to 12 m — within the same shift, with powered panel movement between stations.

Typically chosen by

  • Timber frame manufacturers who have outgrown single-table or modular assembly setups and need a continuous production line
  • Off-site construction businesses producing mixed panel types — walls, ceilings, roof sections, and 'H' door and window frames — within the same shift
  • Workshops handling panels up to 12 m in length where manual handling between stations is a bottleneck or safety concern
Get expert advice
Book a free demo

Key specification considerations

Max Panel Length
Up to 12 m
The 1+1 table configuration means both sections operate independently, allowing a second panel to be assembled while the first is transported — removing the wait time that limits single-table lines.
Panel Width Range
2 m – 4 m
Powered width setting means changeover between panel sizes does not require manual re-jigging, which matters when you are running mixed panel types in the same shift.
Working Positions
2 per table (independent clamp pressure)
Independent clamp pressure on each working position allows simultaneous assembly of panels with different compression requirements without halting the line.
Panel Movement
Integrated rollers with pneumatic lifting
See full specifications
SpecificationValueNotes
Max Panel Length
Up to 12 m
The 1+1 table configuration means both sections operate independently, allowing a second panel to be assembled while the first is transported — removing the wait time that limits single-table lines.
Panel Width Range
2 m – 4 m
Powered width setting means changeover between panel sizes does not require manual re-jigging, which matters when you are running mixed panel types in the same shift.
Table Configuration
1+1 separately controlled tables
Working Positions
2 per table (independent clamp pressure)
Independent clamp pressure on each working position allows simultaneous assembly of panels with different compression requirements without halting the line.
Panel Movement
Integrated rollers with pneumatic lifting
Compression Force
Regulated (variable)
Frame Sections Supported
Straight and sloping; narrow superstructures
Panel Types
Walls, ceilings, roof panels, window and door 'H' semi-finished products
Frame Fixing
Rapid fix and release
Construction
Laser-machined steel profiles, rugged steel construction
Line Components
Tilting tables, vertical transporter, finishing lines
The vertical transporter and finishing lines are part of the complete Framer LINE system — confirm with IWM which elements are included in a standard supply and which are specified separately.
Overall Dimensions
Configured to order — contact IWM
Floor space planning should include clearance for panel feed, operator access along both sides, and extraction or transport connections at the outfeed end; exact footprint is confirmed at project specification stage.
Weight
Confirmed at specification stage — contact IWM
Floor loading should be checked with a structural engineer before installation — particularly relevant for mezzanine or older industrial unit floors.
Power Requirement
Confirmed at specification stage — contact IWM
A line of this scale is likely to require a three-phase supply; exact voltage and amperage should be confirmed with IWM before site preparation begins.
Pneumatic Requirement
Confirmed at specification stage — contact IWM
Pneumatic lifting and clamping are integrated throughout the line; compressor specification should be confirmed with IWM to ensure reliable operation at your production rate.
Manufacturer
Soukup s.r.o., Czech Republic
Get expert advice

Is this the right
machine for you?

Choose the Soukup - Framer Profi Wood House Technology if...

  • Your business is producing timber frame panels at medium to high volume and a single assembly table is creating a throughput bottleneck
  • You need to run mixed panel types — walls, roofs, ceilings, and opening frames — within the same production day without lengthy changeovers
  • You are handling panels up to 12 m and need a safe, powered method of moving panels between assembly and finishing without manual lifting
  • You are planning or expanding an off-site manufacturing facility and need a line that can grow with structured investment

Consider an alternate model if...

  • Your volume is lower or your panel range is more limited — the Soukup Framer Modular Assembly Table for Panels may be a more proportionate starting point without the full line commitment
  • You need panel storage and sequencing before or after assembly rather than a production line — the Timber Frame Off Site Track Storage system addresses that separately
  • Your primary need is vertical handling and transport of finished panels rather than assembly — the Timber Frame Off Site Panels Vertical Transporter may be sufficient as a standalone addition
  • Your operation involves primarily cross-cutting and preparation rather than frame assembly — the Soukup Crossline 650 or Crossline 500 would be the appropriate starting point
Still not sure? We're happy to help
Get expert advice
Ready when you are

Ready to improve your
workshop's output?

Book a specification call with one of our engineers. Thirty minutes, no obligation, plain English advice on what would actually work on your floor.

Get expert advice
Book a free demo
Or call directly +44 (0)7970461899