Dan-List PME 100 Endscribe Machine
- Chosen By List:
- List Item: Joinery shops producing window frames or door units that require accurately scribed glazing bead ends as part of finished assemblies
- List Item: Workshops where tear-out on cross-cut profiled timber is causing rework or quality rejections
- List Item: Operations looking to bring bead end-profiling in-house rather than relying on manual routing or outsourcing
- This Product List:
- List Item: Your main requirement is clean, tear-free end profiles on glazing bead and you want a machine purpose-built for that single task
- List Item: You process a consistent volume of cross-cut profiled bead and want a reliable, repeatable result without manual intervention
- List Item: You want the option to cross-cut and end-profile in one place by adding the 90° saw at the time of order
- Alternate List:
- List Item: You need to profile bead ends as part of a broader range of scribing and profiling operations — the <a href="index.php?option=com_content&view=article&id=53&catid=20">Copenstick TDL</a> or <a href="index.php?option=com_content&view=article&id=54&catid=20">Copenstick UNI</a> may offer more versatility across profile types
- List Item: Your volume is lower and a semi-manual or simpler bench-top solution would suffice — the <a href="index.php?option=com_content&view=article&id=55&catid=20">HEP Glazing Bead End Profile Scribing Machine</a> may be worth discussing with us instead
- List Item: You need pin-and-cope or stick-and-cope joinery profiling rather than end scribing — in which case the <a href="index.php?option=com_content&view=article&id=51&catid=20">Copenstick PIN</a> or <a href="index.php?option=com_content&view=article&id=52&catid=20">Copenstick STP</a> are more appropriate starting points
- Key Specifications:
- Specification Name: Profiling Method, Specification Value: Reverse profiling via sliding table, Specification Notes: The workpiece moves laterally across twin router bits rather than the head traversing — this approach gives more controlled feed and contributes to the tear-free cut quality.
- Specification Name: Cutter Configuration, Specification Value: Two counter-rotating router bits at 18,000 rpm, Specification Notes: The twin-cutter setup — one clockwise, one anticlockwise — profiles both sides of the bead end in a single pass, eliminating breakout on the exit edge.
- Specification Name: Max Routing Height / Width, Specification Value: Approx. 90 mm × 90 mm (profile/tooling dependent), Specification Notes: Actual usable capacity will vary with profile geometry and tooling selection — confirm with IWM when specifying tooling.
- Specification Name: Optional 90° Cut-Off Saw, Specification Value: Available as factory option, Specification Notes: Combining cross-cutting and end-profiling in one machine can reduce handling time if bead is being cut to length and profiled as part of the same operation.
- Full Specifications:
- Specification Name: Profiling Method, Specification Value: Reverse profiling via lateral sliding table
- Specification Name: Cutter Configuration, Specification Value: Twin counter-rotating router bits
- Specification Name: Spindle Speed, Specification Value: 18,000 rpm
- Specification Name: Max Routing Height, Specification Value: Approx. 90 mm (profile/tooling dependent)
- Specification Name: Max Routing Width, Specification Value: Approx. 90 mm (profile/tooling dependent)
- Specification Name: Distance Between Routers, Specification Value: Approx. 120 mm (profile/tooling dependent)
- Specification Name: Workpiece Clamping, Specification Value: Pneumatic, Specification Notes: Pneumatic clamping holds the workpiece securely and consistently throughout the cut cycle, removing reliance on operator hand pressure and reducing the risk of movement-induced breakout.
- Specification Name: Optional 90° Cut-Off Saw, Specification Value: Available as factory option
- Specification Name: Motor Power, Specification Value: 1.5 kW, Specification Notes: Three-phase 400 V supply required — confirm your workshop supply is adequate before ordering.
- Specification Name: Electrical Supply, Specification Value: 400 V, 3-phase
- Specification Name: Machine Dimensions (L × W × H), Specification Value: Contact IWM for confirmed figures, Specification Notes: Allow additional clearance on the left and right of the machine for the full lateral travel of the sliding table and operator access.
- Specification Name: Machine Weight, Specification Value: Contact IWM for confirmed figures
- Specification Name: Extraction Requirement, Specification Value: Contact IWM for confirmed figures, Specification Notes: Dust extraction connection is required — confirm port size and volume flow with IWM when planning installation.
- Specification Name: Noise Level, Specification Value: Contact IWM for confirmed figures
- Specification Name: Warranty, Specification Value: 2 years
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
A purpose-built machine for scribing the ends of cross-cut glazing bead and profiled timber — producing a clean, tear-free counter-profile in a single manual pass. The right choice for joinery shops that need consistent, repeatable bead ends without rework.
