Lange produces edge banding machinery designed for joinery shops and furniture manufacturers working with veneered or melamine-faced board materials. Their B85KFE is a capable production edge bander built to handle the throughput demands of a busy workshop while maintaining the finish quality that cabinet and joinery work requires. We work with Lange because edge banding is a core process for a large number of our customers, and well-specified equipment in this area has a direct impact on finished product quality.
- Chosen By List:
- List Item:
Joinery and fitted furniture shops that need reliable, repeatable edge quality across ABS, PVC, and veneer tapes without manual finishing
- List Item:
Panel processing workshops stepping up from a basic edge bander who need pre-milling and corner rounding built in rather than bolted on later
- List Item:
Small to mid-sized manufacturers where one operator needs to process a steady run of panels efficiently without constant adjustment
- This Product List:
- List Item:
Your workshop regularly processes panels in ABS, PVC, or veneer tape and needs clean, consistent results without manual trimming or finishing afterwards
- List Item:
You need pre-milling to ensure a flat, square substrate before the edge is applied — particularly important on MFC and veneered board
- List Item:
Corner rounding is a standard requirement on your panels and you want it handled in the same pass rather than as a separate operation
- List Item:
You have a confirmed 3-phase supply and compressed air at 6 bar, and sufficient floor space to accommodate a machine of this length
- Alternate List:
- List Item:
Your volume is lower or your budget tighter and you don't need corner rounding — the Lange B85KF offers the same chassis and feed system without the corner rounding unit, at a lower cost
- List Item:
You only need to apply edge tape occasionally rather than as a core production activity — the Lange B60 series is a more compact, lighter-duty machine suited to lower-frequency use and smaller workshops
- List Item:
Your workshop processes exclusively solid timber components rather than panel products — edge banding may not be the correct process for your application
- List Item:
You cannot provide a 3-phase supply or 6-bar compressed air — confirm services availability with IWM before proceeding
- Key Specifications:
- Specification Name:
Feed Speed, Specification Value:
7.0 m/min
- Specification Name:
Workpiece Thickness, Specification Value:
8–50 mm
- Specification Name:
Edging Thickness, Specification Value:
0.4–3.0 mm, Specification Notes:
Covers the full range from fine veneer tape through to 3 mm ABS lipping, so most standard edge materials are handled without a change of machine setup.
- Specification Name:
Total Power, Specification Value:
6.4 kW, Specification Notes:
Requires a 400V 3-phase supply with neutral — confirm this is available at your premises before specifying.
- Full Specifications:
- Specification Name:
Machine Length, Specification Value:
2811 mm, Specification Notes:
Allow additional clearance at both infeed and outfeed ends for panel handling — a practical installation run of 5–6 metres is a reasonable working minimum.
- Specification Name:
Workpiece Thickness, Specification Value:
8–50 mm
- Specification Name:
Minimum Workpiece Width, Specification Value:
approx. 75 mm
- Specification Name:
Minimum Workpiece Length, Specification Value:
approx. 120 mm, Specification Notes:
Very short workpieces below this length cannot be fed safely through the chain-feed system.
- Specification Name:
Edging Thickness, Specification Value:
0.4–3.0 mm
- Specification Name:
Pre-Milling Cutting Depth, Specification Value:
0–2.0 mm, stepless, Specification Notes:
Stepless adjustment means the pre-mill can be dialled in precisely for each board material rather than switching between fixed settings.
- Specification Name:
Maximum Edge Overhang (top & bottom), Specification Value:
Workpiece thickness + 4 mm (2 mm + 2 mm)
- Specification Name:
Feed Speed, Specification Value:
7.0 m/min
- Specification Name:
Electrical Connection, Specification Value:
400V, 50Hz, 3Ph + N, Specification Notes:
Three-phase with neutral is required — single-phase supply is not suitable for this machine.
- Specification Name:
Total Load, Specification Value:
6.4 kW
- Specification Name:
Air Connection, Specification Value:
6 bar, Specification Notes:
A dedicated compressor line or sufficient workshop compressor capacity at 6 bar is needed — confirm your air supply before installation.
- Specification Name:
Weight (nett), Specification Value:
710 kg, Specification Notes:
At 710 kg, floor loading should be checked with your building surveyor before siting the machine, particularly on upper floors or older workshop floors.
- Specification Name:
Compatible Edge Materials, Specification Value:
ABS, PVC, melamine, solid wood veneer (roll and fixed lengths)
- Specification Name:
Key Stations, Specification Value:
Pre-milling, direct glue application, HF cut-off saw, HF top & bottom milling, corner rounding unit, Specification Notes:
Having all five stations integrated means no secondary operations are needed to achieve a finished edge — the panel comes off the machine ready.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=8eJTN1OhO3w
A fully automatic edge bander with pre-milling and corner rounding built in, so panels come off the machine finished and ready — no secondary operations required. Suited to joinery and panel shops that need consistent edge quality across ABS, PVC, and veneer tape day in, day out.
