Skip to main content
Woodworking Machines > Glazing Beading Machines > Copenstick STP
Copenstick STP industrial machine with blue steel frame, white worktop, black rail, and a control panel with emergency stop button
  • Copenstick STP industrial machine with blue steel frame, white worktop, black rail, and a control panel with emergency stop button

Copenstick STP

Copenstick · Timber Window & Door
A servo-driven positioning table for Copenstick TDL and UNI machines that removes manual length measurement from your glazing bead workflow. Designed for joinery workshops where repeatable positioning and network-linked job data matter.

Typically chosen by

  • Joinery workshops already running Copenstick TDL or UNI machines who want to reduce setup time and operator error between operations
  • Production managers introducing repeatable, network-linked workflows where job data is pushed directly to the machine rather than keyed in by hand
  • Businesses scaling up glazing bead output where manual positioning has become a bottleneck or a source of inconsistency
Get expert advice
Book a free demo
Before you commit

See it run on your own material

Bring us a sample profile or board and we'll run it through the machine at our Newark showroom. You'll see the output quality firsthand and we can talk through how it fits your workflow - before any decisions are made.
Book a free demo

Key specification considerations

Available Lengths
2 m – 6.7 m
Longer tables suit workshops processing full-length bead runs without intermediate repositioning; confirm your typical stock lengths before specifying.
Handedness
Left or right-handed
Orientation must be matched to your existing machine layout and operator workflow — this cannot be changed after installation.
Control Interface
Touch-screen NC positioner with USB & Ethernet connectivity
Ethernet linking allows job data to be sent as a CSV file directly to the positioner, removing the need for manual re-entry and the errors that come with it.
Compatible Machines
Copenstick TDL, UNI-V, UNI-H
See full specifications
SpecificationValueNotes
Available Lengths
2 m – 6.7 m
Longer tables suit workshops processing full-length bead runs without intermediate repositioning; confirm your typical stock lengths before specifying.
Handedness
Left or right-handed
Orientation must be matched to your existing machine layout and operator workflow — this cannot be changed after installation.
Control Interface
Touch-screen NC positioner
Network Connectivity
USB & Ethernet
CSV job data can be sent directly from a local network to the positioner, supporting integration with existing production software.
Compatible Operations
Half-lap jointing (TDL), notching (UNI-V), boring (UNI-H)
Brushless Motor Power
0.75 kW
Max Traverse Speed
60 m/min
At this speed a 1 m carriage move takes roughly one second, keeping idle time between cuts to a minimum on high-volume runs.
Positioning Accuracy
±0.1 mm
Max Stored Programs
500
Enough to hold a full product library of bead lengths without ever deleting jobs — useful where the same profiles recur across multiple window systems.
Pusher/Stop Options
Multiple configurations available — discuss with IWM
The specific pusher and stop arrangements depend on your host machine model and auxiliary relay setup; talk to us before ordering to confirm the right configuration.
Net Weight
145 kg
Power Requirement
240 V, 5 A, Single Phase, 50 Hz
Single-phase 5 A supply only — a lighter electrical demand than the TDL or UNI host machines, but confirm your spur capacity if adding this to an existing socket on the same circuit.
Manufacturer
Copenstick
Get expert advice

Is this the right
machine for you?

Choose the Copenstick STP if...

  • You are already running or planning to run a Copenstick TDL, UNI-V, or UNI-H machine and want to increase positioning accuracy and cycle speed
  • Your operation would benefit from sending job data directly from a network or computer to the machine, removing manual re-entry of dimensions
  • You process glazing beads in consistent, repeatable runs where a programmable NC table will deliver a measurable reduction in setup time
  • You are building towards a more automated production line and need a positioning solution that can grow with that ambition

Consider an alternate model if...

  • You do not currently own a Copenstick TDL or UNI machine — the STP is a companion unit, not a standalone machine; discuss the full Copenstick range with us
  • Your volumes are lower or your bead work is highly varied — a manually operated stop setup on the Copenstick PIN or UNI may be more practical and cost-effective
  • You need end-profiling or scribing capability rather than positioning — the HEP Glazing Bead End Profile Scribing Machine or Dan-List PME 100 Endscribe address a different part of the process
  • Budget is a primary constraint and NC automation is not yet justified by your throughput — talk to us about where the STP genuinely pays for itself in your workflow
Still not sure? We're happy to help
Get expert advice
Ready when you are

Ready to improve your
workshop's output?

Book a specification call with one of our engineers. Thirty minutes, no obligation, plain English advice on what would actually work on your floor.

Get expert advice
Book a free demo
Or call directly +44 (0)7970461899