Production Output | 90–120 kg/hour | At full rate, the 0.75 m³ hopper will empty in roughly 30–50 minutes depending on material density — factor this into how your extraction feeds the press. |
Briquette Diameter | 70 mm | |
Briquette Length | 45 mm (adjustable via potentiometer) | The on-board potentiometer lets you adjust briquette length to suit the density of material being pressed, giving you control over briquette consistency. |
Briquette Density | 900–1,100 kg/m³ | |
Compression Method | Hydraulic piston, 10 tons per square inch | |
Accepted Materials | All wood waste types: shavings, dust, chippings, MDF — max 15% moisture content | Material above 15% moisture will not compress reliably and may damage the press — check your waste stream before running MDF or green timber offcuts. |
Dimensions (L × W × H) | 2220 × 1200 × 1510 mm | Allow additional clearance beyond the footprint for infeed ducting, briquette discharge, and operator access — this is a larger machine and siting should be planned carefully. |
Weight | 810 kg | At this weight, floor loading capacity should be checked with your building surveyor before installation. |
Hopper Volume | 0.75 m³ | |
Pump Motor Input | 11 kW | |
Power Consumption | 8.2 kW/hour | The machine requires a 3-phase, 32-amp supply — confirm your workshop supply is adequate before ordering. |
Electrical Supply | 3-phase, 32 amp | |
Operation | Continuous | The press runs without stopping between cycles, making it suited to workshops where waste is generated at a steady, ongoing rate rather than in batches. |
Oil Cooler | Yes | Prevents hydraulic oil from overheating during extended continuous runs, which protects the press and reduces unplanned downtime. |
Auto Reverse Vertical Agitator | Yes | Prevents bridging or blockages in the hopper, reducing the need for manual intervention when processing fine or fluffy materials such as planer shavings. |
Automatic Switch-out | Yes | The machine can shut itself down safely without an operator present, useful for workshops where the press runs at the end of a shift. |
Noise Level | 62 dB (max, under load) | 62 dB is roughly equivalent to a normal conversation — no acoustic treatment is required under standard workshop conditions. |
Certification | UKCA | UKCA marking confirms the machine meets UK product safety requirements post-Brexit — equivalent to CE for the UK market and required for legal sale and use in Great Britain. |
Lead Time | Normally 4–6 weeks from receipt of order | |
Installation & Commissioning | Available at additional cost | Cost varies by location — talk to us when enquiring and we will confirm the figure for your site. |
