IWM is our own range of machinery and equipment, developed and specified over fifty years of working directly with UK timber, joinery, and bespoke woodworking businesses. The IWM range includes bandsaws, spindle moulders, dust extraction systems, impregnation baths, and spray finishing booths — equipment we have either designed ourselves or built in close collaboration with trusted manufacturing partners. When we put the IWM name on a machine, it reflects the standards and practical requirements we know British workshops expect.
- Chosen By List:
- List Item:
Joinery and window manufacturers needing consistent base treatment across large batches of timber profiles
- List Item:
Workshops looking to apply preservative or primer coatings without the complexity or footprint of a full spray setup
- List Item:
Production lines where components are dipped or drawn through a coating bath as part of a sequential finishing process
- This Product List:
- List Item:
Your components are narrow-section profiles — window sections, mouldings, or dowels — that fit within a 150 mm bath width
- List Item:
You need a simple, low-infrastructure method of applying impregnation treatments or base coats without investing in spray equipment
- List Item:
Your production involves drawing or dipping batches of consistent-length components and you want a dedicated bath sized to match your longest standard stock
- Alternate List:
- List Item:
Your components are wider than 150 mm or irregular in shape — in that case, the IWM Wood Finishing Spray Booth With Extractor may be a more appropriate solution
- List Item:
You need to apply topcoats, lacquers, or finishes beyond basic impregnation and priming, where spray application gives better control and coverage
- List Item:
Your workflow requires handling of assembled or jointed components rather than individual sections — talk to us about the Soukup Assembling Equipment & Trolleys for downstream handling
- Key Specifications:
- Specification Name:
Available Lengths, Specification Value:
2500 / 3000 / 4000 mm, Specification Notes:
Length selection should be guided by your longest standard component — choosing a bath shorter than your stock will require awkward repositioning and uneven coating coverage.
- Specification Name:
Bath Width, Specification Value:
150 mm, Specification Notes:
Suitable for relatively narrow profiles such as window sections, mouldings, or dowels — wider boards or assembled frames will not fit and would require an alternative finishing method.
- Specification Name:
Bath Depth, Specification Value:
350 mm, Specification Notes:
Allows full submersion of most standard timber sections; confirm your component cross-section fits within this depth before specifying.
- Specification Name:
Construction, Specification Value:
Stainless steel, Specification Notes:
Stainless steel construction resists corrosion from water-based preservatives, solvent primers, and base coat fluids over sustained production use.
- Full Specifications:
- Specification Name:
Available Lengths, Specification Value:
2500 mm / 3000 mm / 4000 mm, Specification Notes:
Length selection should be guided by your longest standard component — choosing a bath shorter than your stock will require awkward repositioning and uneven coating coverage.
- Specification Name:
Bath Width, Specification Value:
150 mm, Specification Notes:
Suitable for relatively narrow profiles such as window sections, mouldings, or dowels — wider boards or assembled frames will not fit and would require an alternative finishing method.
- Specification Name:
Bath Depth, Specification Value:
350 mm, Specification Notes:
Allows full submersion of most standard timber sections; confirm your component cross-section fits within this depth before specifying.
- Specification Name:
Material / Construction, Specification Value:
Stainless steel, Specification Notes:
Stainless steel resists corrosion from the range of water-based and solvent-based fluids typically used in preservative and base coat applications.
- Specification Name:
Drain / Emptying Provision, Specification Value:
Discharge outlet fitted as standard
- Specification Name:
Drip Tray, Specification Value:
Included, Specification Notes:
Returns excess fluid draining from soaked components back into the bath, reducing waste and keeping the work area clean.
- Specification Name:
Manufacturer, Specification Value:
IWM
- Specification Name:
Power Requirements, Specification Value:
No powered drive — manual/hand-soak operation, Specification Notes:
No electrical connection is required for standard operation; consult IWM if you intend to add ancillary heating or agitation.
- Specification Name:
Weight, Specification Value:
Contact IWM to confirm
- Specification Name:
Compatible Coatings / Fluids, Specification Value:
Preservatives, impregnation agents, and base coats — consult IWM for compatibility with specific products, Specification Notes:
Stainless steel construction is broadly compatible with water-based and most solvent-based preservatives and primers; always verify fluid compatibility with your coating supplier before use.
- Specification Name:
Lid or Cover, Specification Value:
Contact IWM to confirm
- Product Gallery:
- Image:
A straightforward stainless steel bath for dipping and hand-soaking timber profiles in preservatives or base coats. Available in three lengths to suit your longest standard component, with a built-in drip tray to return excess fluid and a discharge outlet for easy emptying.
- Chosen By List:
- List Item:
Joinery and cabinet shops applying water-based lacquers or stains who need to contain overspray without a dedicated spray room
- List Item:
Workshops looking for a low-cost, space-efficient way to meet basic finishing hygiene and fire-risk requirements
- List Item:
Facilities finishing smaller components or batches where a permanent installation would be disproportionate to the volume
- This Product List:
- List Item:
You are applying water-based finishes only and need a simple, low-footprint way to contain overspray
- List Item:
Your finishing volume is low to moderate and a permanent spraybooth installation is not justified
- List Item:
You need to protect the rest of your workshop from airborne particulates without major capital outlay
- List Item:
You are finishing smaller components or batches rather than large carcasses or panels
- Alternate List:
- List Item:
You are using or intend to use solvent-based coatings — this booth is not rated for that application and you should discuss a compliant alternative with IWM
- List Item:
Your finishing output is high and you need a permanent, fully certified extraction solution with regulated airflow
- List Item:
You require full COSHH / LEV compliance documentation — consider discussing a purpose-built spraybooth specification with IWM
- List Item:
You are also looking at pre-finishing treatment — the IWM Impregnation & Basic Coating Bath may be relevant earlier in your process
- Key Specifications:
- Specification Name:
Construction, Specification Value:
Cardboard outer with textile filter lining, Specification Notes:
The textile lining captures spray particulates; this is a filtration aid, not a full extraction system — suitability for your process should be confirmed before ordering.
- Specification Name:
Finish Compatibility, Specification Value:
Water-based paint only, Specification Notes:
Not rated for solvent-based finishes; using solvent paints in this booth would present a fire and health risk.
- Specification Name:
Overspray Control, Specification Value:
Yes — partial filtration, Specification Notes:
Provides partial filtration of spray fumes and containment of particulates, reducing contamination of the wider workshop environment.
- Specification Name:
Extraction Control, Specification Value:
Pneumatic — auto-reduces to 1/3 when gun is holstered, Specification Notes:
Suction automatically drops when the spray gun is hung on the adjacent stand, reducing energy consumption between coats without any manual adjustment.
- Full Specifications:
- Specification Name:
Construction — Outer, Specification Value:
Cardboard
- Specification Name:
Construction — Inner Lining, Specification Value:
Textile filter
- Specification Name:
Finish Compatibility, Specification Value:
Water-based paint only, Specification Notes:
Not suitable for solvent-based coatings.
- Specification Name:
Overspray Containment, Specification Value:
Yes
- Specification Name:
Fume Filtration, Specification Value:
Partial, Specification Notes:
Partial filtration is not a substitute for full LEV (Local Exhaust Ventilation) compliance — check your COSHH obligations with your responsible person.
- Specification Name:
Extractor Included, Specification Value:
Yes — pneumatic air suction through wall with air re-circulation, Specification Notes:
The pneumatic system controls suction through the booth wall; when the spray gun is holstered on the adjacent stand, suction automatically reduces to one-third of operational level.
- Specification Name:
Dimensions, Specification Value:
Contact IWM to confirm, Specification Notes:
Dimensions vary by configuration — talk to us before planning your floor layout or extraction ducting.
- Specification Name:
Weight, Specification Value:
Contact IWM to confirm
- Specification Name:
Electrical Supply Required, Specification Value:
Contact IWM to confirm, Specification Notes:
Confirm supply requirements with IWM before installation to ensure your workshop consumer unit is adequately rated.
- Specification Name:
Filter Replacement / Consumables, Specification Value:
Textile filter lining is a consumable — replacement interval depends on product type and finishing volume, Specification Notes:
Regular filter replacement is essential to maintain airflow and filtration performance; a clogged filter will reduce extraction efficiency and affect finish quality.
- Product Gallery:
- Image:
- Image:
A low-footprint spraying enclosure for workshops applying water-based lacquers and stains. Keeps overspray out of the wider workshop without the cost or space demands of a permanent installation.
- Chosen By List:
- List Item:
Joinery and shopfitting workshops regularly processing full sheets of MDF, plywood, or melamine who need consistent, square cuts with a scoring unit to protect face veneers
- List Item:
Smaller workshops where floor space is at a premium — the vertical format means sheets are handled upright rather than laid flat, freeing up the shop floor
- List Item:
Operations that need repeatable rip and cross cuts on sheet material without committing to a large horizontal beam saw investment
- This Product List:
- List Item:
You regularly process full-size sheet material (MDF, plywood, melamine) and need accurate, repeatable rip and cross cuts with a built-in scoring unit to protect face finishes
- List Item:
Your workshop is space-constrained and a horizontal beam saw is not practical — the vertical format keeps the footprint manageable while still handling large panels
- List Item:
You need pneumatic clamping to hold sheets securely during cutting and already have, or can easily install, a compressed air supply
- List Item:
You cut a variety of panel thicknesses and angles and need digital readout, automatic frame shifting, and an angle cutting device as standard
- Alternate List:
- List Item:
Your typical sheet sizes are smaller or your cutting height requirement is well below 2100mm — talk to IWM about whether a smaller-format vertical wall saw would meet your needs at lower cost
- List Item:
You do not have a compressed air supply and installing one is not practical — this machine cannot operate its clamping system without it
- List Item:
You need to cut material thicker than 42mm regularly with the scorer engaged — confirm maximum cut depth suits your stock before specifying
- List Item:
Your volume is high enough to justify a horizontal beam saw, which may offer faster cycle times and greater automation for production environments — speak to IWM about suitable horizontal beam saw alternatives
- Key Specifications:
- Specification Name:
Cutting Height, Specification Value:
2100mm, Specification Notes:
Accommodates a full standard sheet height, so 2440mm boards will need to be checked against actual usable cut capacity before specifying.
- Specification Name:
Cutting Length, Specification Value:
4100mm, Specification Notes:
Covers standard 2440mm and 3050mm sheet lengths with room to spare, making this suitable for most common panel sizes without repositioning.
- Specification Name:
Cutting Depth (with scorer), Specification Value:
42mm, Specification Notes:
The scoring unit reduces maximum cut depth slightly — worth confirming this is adequate if you regularly cut thicker engineered panels or laminated boards.
- Specification Name:
Main Saw Motor, Specification Value:
3kW, Specification Notes:
This is a three-phase motor — confirm your workshop has a suitable three-phase supply before ordering to avoid additional infrastructure costs.
- Full Specifications:
- Specification Name:
Cutting Height, Specification Value:
2100mm, Specification Notes:
Accommodates a full standard sheet height, so 2440mm boards will need to be checked against actual usable cut capacity before specifying.
- Specification Name:
Cutting Length, Specification Value:
4100mm
- Specification Name:
Cutting Depth (without scoring unit), Specification Value:
55mm
- Specification Name:
Cutting Depth (with scoring unit), Specification Value:
42mm, Specification Notes:
The scoring unit reduces maximum cut depth — confirm this suits your typical material thickness before specifying.
- Specification Name:
Main Saw Motor, Specification Value:
3kW, Specification Notes:
Confirm phase and amperage requirements with your electrician before ordering.
- Specification Name:
Scoring Unit, Specification Value:
Included, Specification Notes:
The scoring unit makes a shallow pre-cut on the underside of the panel before the main blade passes through, preventing breakout on faced or veneered boards.
- Specification Name:
Automatic Shifting Frame, Specification Value:
Yes, Specification Notes:
Automates the repositioning of the saw carriage between cuts, reducing operator effort and improving repeatability on production runs.
- Specification Name:
Digital Readout to Vertical Cut, Specification Value:
Yes
- Specification Name:
Mid Shelf Cutting Fence, Specification Value:
Included
- Specification Name:
Pneumatic Clamping of Workpiece, Specification Value:
Yes — compressed air required, Specification Notes:
Pneumatic clamping holds the sheet firmly during cutting without operator intervention, but this machine requires a compressed air supply on-site — confirm this is available before ordering.
- Specification Name:
Pneumatic Locking of Beam, Specification Value:
Yes
- Specification Name:
Transport Roller for Sheets, Specification Value:
Included, Specification Notes:
Assists loading and positioning of heavy sheet material, reducing the physical effort and risk of handling full boards single-handed.
- Specification Name:
Angle Cutting Device, Specification Value:
Included
- Specification Name:
Machine Dimensions (L x H x W), Specification Value:
5100mm x 3100mm x 1350mm, Specification Notes:
At over 3m tall and 5.1m long, confirm your workshop has sufficient ceiling height and clear wall space — additional clearance will be needed for sheet loading and extraction ducting.
- Specification Name:
Certification, Specification Value:
Full CE
- Specification Name:
Weight, Specification Value:
Contact IWM to confirm, Specification Notes:
Ask IWM for the confirmed figure — if the machine is above approximately 500kg, floor loading capacity should be checked with your structural engineer before installation.
- Specification Name:
Electrical Supply, Specification Value:
Three-phase — voltage and amperage: contact IWM to confirm, Specification Notes:
A three-phase supply is required; confirm the exact voltage and amperage with IWM so your electrician can verify your workshop supply is adequate before ordering.
- Specification Name:
Compressed Air Requirement, Specification Value:
Required — minimum pressure and flow rate: contact IWM to confirm, Specification Notes:
A compressed air supply is needed for the pneumatic clamping and beam locking — ask IWM for the minimum pressure and flow rate before ordering so you can check your existing supply or size a new one.
- Specification Name:
Noise Level, Specification Value:
Contact IWM to confirm, Specification Notes:
If the confirmed level exceeds 80 dB(A), acoustic treatment or hearing protection will be required under UK COSHH and noise at work regulations.
- Specification Name:
Extraction Connection, Specification Value:
Contact IWM to confirm, Specification Notes:
Confirm the port diameter and required extraction volume with IWM to ensure your existing dust extraction unit can be connected and meet the machine's dust removal needs.
- Product Gallery:
- Image:
A full-format vertical wall saw for workshops that need accurate, repeatable rip and cross cuts on sheet material without the floor space demands of a horizontal beam saw. Scoring unit, pneumatic clamping, and digital readout are all included as standard.
- Chosen By List:
- List Item:
Joinery shops with a consistent run of stair commissions who need glue-ups to close square without relying on manual cramp adjustment
- List Item:
Workshops where stair widths vary across jobs — particularly those regularly working between 800 mm and 1200 mm
- List Item:
Businesses replacing a manual cramping setup to reduce assembly time and the risk of racking during pressing
- This Product List:
- List Item:
You are producing stairs regularly and need a repeatable, parallel clamping process rather than hand-setting individual cramps each time
- List Item:
Your stair widths vary between jobs — the adjustable frame handles 800–1200 mm without a manual re-set
- List Item:
You want a machine built to your workshop's handed preference (left or right controls) and your required frame length from the outset
- List Item:
You have three-phase power available and a floor capable of supporting approximately 500 kg
- Alternate List:
- List Item:
Your stair volumes are lower or more occasional — the <a href="index.php?option=com_content&view=article&id=110&catid=33">Pouwels DEF-50 Stair Making Machine</a> may offer a more appropriate level of capability for the output required; talk to us about where the crossover sits
- List Item:
You require a more integrated stair-making solution beyond cramping alone — the <a href="index.php?option=com_content&view=article&id=112&catid=33">US Concepts INC. Specialist Stair Machinery</a> range covers broader stair production processes and may be worth discussing if your workflow demands it
- List Item:
Your workshop runs on single-phase supply only — this machine requires three-phase and there is no single-phase variant available; discuss your supply situation with us before specifying
- List Item:
Your typical stair width falls consistently outside the 800–1200 mm range — discuss your specific dimensions with us before specifying
- Key Specifications:
- Specification Name:
Stair Width Range, Specification Value:
800 mm – 1200 mm, Specification Notes:
The frame expands in a single parallel movement, so you are not re-setting individual cramps between jobs of different widths.
- Specification Name:
Hydraulic Pressure, Specification Value:
Approx. 10 tonnes
- Specification Name:
Frame Length, Specification Value:
4.5 m standard, available in 500 mm increments, Specification Notes:
If your typical stair run exceeds 4.5 m, specify a longer frame at order — extending after delivery is not straightforward.
- Specification Name:
Electrical Supply, Specification Value:
380 / 400 V, 3-phase, Specification Notes:
Three-phase supply is required; confirm your workshop has this available before ordering.
- Full Specifications:
- Specification Name:
Frame Length, Specification Value:
4.5 m standard, available in 500 mm increments, Specification Notes:
If your typical stair run exceeds 4.5 m, specify a longer frame at order — extending after delivery is not straightforward.
- Specification Name:
Frame Width (min), Specification Value:
840 mm
- Specification Name:
Frame Width (max), Specification Value:
1240 mm (expandable by 400 mm from minimum)
- Specification Name:
Stair Width Capacity, Specification Value:
800 mm – 1200 mm
- Specification Name:
Hydraulic Rams, Specification Value:
4 units, Specification Notes:
Four rams ensure all four corners move simultaneously, which is what keeps the assembly parallel under load rather than pulling one end tighter than the other.
- Specification Name:
Hydraulic Pressure, Specification Value:
Approx. 10 tonnes
- Specification Name:
Cramping Bars (vertical), Specification Value:
8, spaced at 500 mm centres, Specification Notes:
500 mm spacing keeps bars clear of typical tread-and-riser positions, giving reasonable access along the stair during assembly.
- Specification Name:
Clamp Height, Specification Value:
400 mm
- Specification Name:
Controls, Specification Value:
Motorised pump with push-button starter; simple lever for open/close
- Specification Name:
Starter / Lever Position, Specification Value:
Left- or right-hand operation (specified at order, no extra charge), Specification Notes:
Specify this at order stage to suit your workshop layout — it cannot easily be changed once built.
- Specification Name:
Frame Construction, Specification Value:
Heavy-duty welded frame and side rails, thick-gauge box steel
- Specification Name:
Cramping Fingers, Specification Value:
Reinforced steel
- Specification Name:
Mobility / Stability, Specification Value:
Wheel kit or adjustable feet (specified at order), Specification Notes:
Wheels suit workshops where the frame needs to be moved between jobs or stored aside; adjustable feet are preferable if the machine will stay in a fixed position.
- Specification Name:
Voltage, Specification Value:
380 / 400 V, 3-phase, Specification Notes:
Three-phase supply is required; confirm your workshop has this available before ordering.
- Specification Name:
Weight, Specification Value:
Approx. 500 kg (SC4M), Specification Notes:
At 500 kg, floor loading capacity should be checked — particularly relevant in older workshop buildings or on upper floors.
- Specification Name:
Lead Time, Specification Value:
4–6 weeks from order
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=ilO7SufiS6A
- Video Link:
https://www.youtube.com/watch?v=HUhg-eGhIss
- Related Case Studies:
A hydraulic cramping frame for workshops producing stairs regularly — four rams close all four corners simultaneously, so glue-ups come out square without manual adjustment between jobs.
- Chosen By List:
- List Item:
Workshops running a briquette machine at sustained output who need to bag product without halting the machine
- List Item:
Operations producing briquettes for resale or regular bulk use, where consistent bag fill weights of 20–25 kg matter for stock control
- List Item:
Sites that have already invested in a Falach briquette machine and want to reduce the manual handling involved in the bagging stage
- This Product List:
- List Item:
Your briquette machine is already producing at a rate that makes manual single-bag changes a genuine time cost in your day
- List Item:
You are bagging briquettes for resale and consistent, repeatable bag weights matter for presentation and stock management
- List Item:
You want a bagging solution that is built to work with your specific machine rather than a generic off-the-shelf unit
- List Item:
You are running a Falach briquette machine (any current model) and want the bagging stage to keep pace with production output
- Alternate List:
- List Item:
You are still selecting a briquette machine — talk to us about specifying the <a href="index.php?option=com_content&view=article&id=14&catid=13">Falach 20</a>, 30, 35, 20XL, or 50XL alongside this carousel so the two are matched correctly from the outset
- List Item:
Your briquette output is low or intermittent (for example, a <a href="index.php?option=com_content&view=article&id=16&catid=13">Falach 30</a> at 25–35 kg/hour used only occasionally) — at that volume, manual bagging may be sufficient and the carousel may not justify the additional cost
- List Item:
Your available floor space is limited — confirm the carousel footprint with us before proceeding, as the six-position design requires adequate clearance for operator access and bag handling
- List Item:
You need bags or boxes immediately — replacement plastic bags and environmentally friendly boxes are available separately and may be all you need in the short term
- Key Specifications:
- Specification Name:
Bag Positions, Specification Value:
6, Specification Notes:
Six simultaneous bag positions means the carousel can be cycled through without pausing the briquette machine, keeping output continuous.
- Specification Name:
Bag Fill Weight, Specification Value:
Approx. 20–25 kg per bag, Specification Notes:
Actual fill weight will vary depending on briquette material and density — confirm expected output with IWM when specifying.
- Specification Name:
Power Requirement, Specification Value:
None — mechanical operation, Specification Notes:
The carousel requires no electrical supply; it operates purely mechanically, so there is no additional power infrastructure to arrange.
- Specification Name:
Loading Method, Specification Value:
Top loading
- Full Specifications:
- Specification Name:
Bag Positions, Specification Value:
6, Specification Notes:
Six simultaneous bag positions means the carousel can be cycled through without pausing the briquette machine, keeping output continuous.
- Specification Name:
Bag Fill Weight, Specification Value:
Approx. 20–25 kg per bag, Specification Notes:
Actual fill weight will vary depending on briquette material and density — confirm expected output with IWM when specifying.
- Specification Name:
Loading Method, Specification Value:
Top loading
- Specification Name:
Compatibility, Specification Value:
Universal — bespoke-made to fit most briquette machines, Specification Notes:
Units are made to order, so you will need to confirm your existing or intended briquette machine model before ordering.
- Specification Name:
Dimensions, Specification Value:
Confirmed on enquiry, Specification Notes:
Footprint varies by machine configuration — contact IWM before finalising your installation layout so clearance for operator access and bag removal can be assessed.
- Specification Name:
Weight, Specification Value:
200 kg
- Specification Name:
Power Requirement, Specification Value:
None — mechanical operation, Specification Notes:
The carousel requires no electrical supply; it operates purely mechanically, so there is no additional power infrastructure to arrange.
- Specification Name:
Replacement Bags, Specification Value:
Available in packs of 50 — £19.98 + VAT, ex works Newark
- Specification Name:
Environmentally Friendly Boxes, Specification Value:
Available in packs of 50 — POA
- Specification Name:
Lead Time, Specification Value:
Normally ex stock, Specification Notes:
Stock availability can change — confirm with IWM at the time of enquiry to avoid any delay to your production schedule.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://youtube.com/shorts/p59EqKICjdo?si=16kLSVG3ygvp_fM3
A bespoke top-loading carousel that keeps your briquette machine running without interruption — six bag positions mean you can swap full bags one at a time without ever stopping production.
- Chosen By List:
- List Item:
Joinery and timber workshops looking to offset waste disposal costs by converting shavings and dust into saleable or burnable briquettes
- List Item:
Businesses with continuous production runs who need a press that doesn't require manual cycling between batches
- List Item:
Workshops seeking a used machine at a lower entry cost than a new equivalent, where output in the 60–70 kg/hour range comfortably meets their waste volume
- This Product List:
- List Item:
Your workshop generates enough waste to justify a dedicated briquette press and 60–70 kg/hour output comfortably handles your volume
- List Item:
You need continuous operation rather than a machine that stops between cycles
- List Item:
You want to enter briquetting at a lower capital cost and a good-condition used machine is acceptable
- List Item:
You have a confirmed 3-phase 32A supply and floor loading capacity to suit a 1,270 kg machine
- Alternate List:
- List Item:
Your waste volumes are higher and you need greater throughput — talk to us about the IWM Falach 70 and other higher-capacity briquetting options in our current range
- List Item:
You prefer a new or ex-demo machine with known provenance — the BrikStar EK (ex-demo) may be a more appropriate starting point for that conversation
- List Item:
Your workshop runs on single-phase power only — this machine cannot be adapted for single-phase supply
- List Item:
Your production is intermittent or low-volume and the output of this press would exceed your actual waste generation, leaving the machine underutilised
- Key Specifications:
- Specification Name:
Output, Specification Value:
60–70 kg/hour, Specification Notes:
At a typical shavings bulk density, this equates to a meaningful reduction in skip or bag waste over a full production shift.
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Operation, Specification Value:
Continuous, Specification Notes:
The machine runs without stopping between cycles, which suits workshops with a steady, uninterrupted feed of waste material rather than batch processing.
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A — 7.5 kW pump motor, Specification Notes:
Confirm your workshop has a 3-phase 32A supply available before ordering — this is not suitable for single-phase installations.
- Full Specifications:
- Specification Name:
Production, Specification Value:
60–70 kg/hour
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Dimensions (L × W × H), Specification Value:
1940 × 1250 × 1470 mm, Specification Notes:
Allow additional clearance around all sides for material feed, extraction ducting, and safe operator access — the footprint alone will not reflect the full space required.
- Specification Name:
Weight, Specification Value:
1270 kg, Specification Notes:
At over 1,000 kg, floor loading capacity should be verified with your building surveyor or structural engineer before installation.
- Specification Name:
Pump Motor Input, Specification Value:
7.5 kW
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A, Specification Notes:
Confirm supply availability with your electrician before specifying this machine.
- Specification Name:
Operation, Specification Value:
Continuous
- Specification Name:
Automatic Switch-out, Specification Value:
Yes, Specification Notes:
The machine will shut itself down automatically under defined conditions, reducing the need for constant operator supervision during a run.
- Specification Name:
Oil Cooler, Specification Value:
No, Specification Notes:
Without an oil cooler, hydraulic oil temperature should be monitored during extended runs — speak to IWM if your workshop operates the machine for prolonged periods without breaks.
- Specification Name:
Noise Level, Specification Value:
68 dB, Specification Notes:
68 dB is roughly equivalent to a normal conversation at close range — acoustic treatment is unlikely to be required at this level, though workplace noise assessments should still follow standard practice.
- Specification Name:
Condition, Specification Value:
Used, Specification Notes:
Service history, hours of use, and any work carried out prior to sale are available on request — contact IWM directly for full details before specifying.
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Product Gallery:
- Image:
- Image:
A used hydraulic briquette press producing 60–70 kg/hour of 60mm briquettes from wood shavings and dust. A practical entry point for workshops that want to cut disposal costs and generate a burnable or saleable by-product from their waste stream.
- Chosen By List:
- List Item:
Joinery and timber workshops looking to offset waste disposal costs by converting shavings and dust into saleable or burnable briquettes
- List Item:
Businesses with continuous production runs who need a press that doesn't require manual cycling between batches
- List Item:
Workshops seeking a used machine at a lower entry cost than a new equivalent, where output in the 60–70 kg/hour range comfortably meets their waste volume
- This Product List:
- List Item:
Your workshop generates enough waste to justify a dedicated briquette press and 60–70 kg/hour output comfortably handles your volume
- List Item:
You need continuous operation rather than a machine that stops between cycles
- List Item:
You want to enter briquetting at a lower capital cost and a good-condition used machine is acceptable
- List Item:
You have a confirmed 3-phase 32A supply and floor loading capacity to suit a 1,270 kg machine
- Alternate List:
- List Item:
Your waste volumes are higher and you need greater throughput — talk to us about the IWM Falach 70 and other higher-capacity briquetting options in our current range
- List Item:
You prefer a new or ex-demo machine with known provenance — the BrikStar EK (ex-demo) may be a more appropriate starting point for that conversation
- List Item:
Your workshop runs on single-phase power only — this machine cannot be adapted for single-phase supply
- List Item:
Your production is intermittent or low-volume and the output of this press would exceed your actual waste generation, leaving the machine underutilised
- Key Specifications:
- Specification Name:
Output, Specification Value:
60–70 kg/hour, Specification Notes:
At a typical shavings bulk density, this equates to a meaningful reduction in skip or bag waste over a full production shift.
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Operation, Specification Value:
Continuous, Specification Notes:
The machine runs without stopping between cycles, which suits workshops with a steady, uninterrupted feed of waste material rather than batch processing.
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A — 7.5 kW pump motor, Specification Notes:
Confirm your workshop has a 3-phase 32A supply available before ordering — this is not suitable for single-phase installations.
- Full Specifications:
- Specification Name:
Production, Specification Value:
60–70 kg/hour
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Dimensions (L × W × H), Specification Value:
1940 × 1250 × 1470 mm, Specification Notes:
Allow additional clearance around all sides for material feed, extraction ducting, and safe operator access — the footprint alone will not reflect the full space required.
- Specification Name:
Weight, Specification Value:
1270 kg, Specification Notes:
At over 1,000 kg, floor loading capacity should be verified with your building surveyor or structural engineer before installation.
- Specification Name:
Pump Motor Input, Specification Value:
7.5 kW
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A, Specification Notes:
Confirm supply availability with your electrician before specifying this machine.
- Specification Name:
Operation, Specification Value:
Continuous
- Specification Name:
Automatic Switch-out, Specification Value:
Yes, Specification Notes:
The machine will shut itself down automatically under defined conditions, reducing the need for constant operator supervision during a run.
- Specification Name:
Oil Cooler, Specification Value:
No, Specification Notes:
Without an oil cooler, hydraulic oil temperature should be monitored during extended runs — speak to IWM if your workshop operates the machine for prolonged periods without breaks.
- Specification Name:
Noise Level, Specification Value:
68 dB, Specification Notes:
68 dB is roughly equivalent to a normal conversation at close range — acoustic treatment is unlikely to be required at this level, though workplace noise assessments should still follow standard practice.
- Specification Name:
Condition, Specification Value:
Used, Specification Notes:
Service history, hours of use, and any work carried out prior to sale are available on request — contact IWM directly for full details before specifying.
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Product Gallery:
- Image:
- Image:
The IWM Soukup Briquette machine is trusted by many customers who rely on it to help them recycle their waste wood into a revenue stream. IWM Machines have become the UK’s leading choice for hydraulic briquette machines, efficiently converting wood waste and other materials into renewable energy briquettes. These briquettes are fully certified under the UK Clean Air Strategy, providing the same heat output as coal while producing no harmful air pollutants.
- Chosen By List:
- List Item:
Joinery shops that resaw solid timber sections daily and need a machine that holds its setup without constant adjustment
- List Item:
Bespoke furniture and cabinet makers who switch regularly between curve work and straight resawing and want fast blade changes built in
- List Item:
Small to mid-sized timber workshops with a three-phase supply looking for a cast-iron machine at a competitive UK price point
- This Product List:
- List Item:
Your workshop regularly resaws or rips solid timber sections up to 350mm in height and needs a machine built to handle that daily without flexing or losing accuracy
- List Item:
You need a stable, cast-iron construction bandsaw that will hold its blade guides and table settings over a full production day
- List Item:
You cut a variety of blade widths — from fine curved work to straight resawing — and want quick blade changes built into the design
- List Item:
Your workshop has a three-phase supply and you want a straightforwardly specified, competitively priced UK-stocked machine
- Alternate List:
- List Item:
Your cutting height requirement exceeds 350mm — IWM's range also includes larger models (530, 630, and 700 series); talk to us to confirm which capacity suits your application
- List Item:
Your workshop runs on single-phase supply only — this machine is three-phase and no single-phase variant is available in this specification
- List Item:
Your volume or application is lighter — a smaller bandsaw may represent better value if you are not regularly working at or near the capacity limits of this machine
- List Item:
You require a re-saw fence, CNC control, or automated feed as standard — these are not features of this machine; contact IWM to discuss whether your application calls for a higher-specification model
- Key Specifications:
- Specification Name:
Max Cutting Height, Specification Value:
350mm, Specification Notes:
Sufficient for resawing most solid timber sections and large softwood blanks — confirm your tallest regular workpiece before specifying.
- Specification Name:
Max Cutting Width, Specification Value:
500mm
- Specification Name:
Table Size, Specification Value:
750mm × 530mm, Specification Notes:
A generously sized table for this class of machine; supports longer boards without requiring a separate outfeed stand in most joinery applications.
- Specification Name:
Motor, Specification Value:
3hp, 415V three-phase, Specification Notes:
Requires a three-phase supply — confirm your workshop electrical provision before ordering.
- Full Specifications:
- Specification Name:
Motor, Specification Value:
3hp
- Specification Name:
Electrical Supply, Specification Value:
415V three-phase, Specification Notes:
Three-phase only — your supply and amperage capacity should be confirmed with your electrician prior to ordering.
- Specification Name:
Table Size, Specification Value:
750mm × 530mm
- Specification Name:
Max Cutting Height, Specification Value:
350mm
- Specification Name:
Max Cutting Width, Specification Value:
500mm
- Specification Name:
Blade Width Capacity, Specification Value:
6mm – 35mm, Specification Notes:
A wide blade range means this machine can be set up for fine curve work at the narrow end or efficient straight resawing with a wider blade.
- Specification Name:
Wheels, Specification Value:
Cast iron, rubber-coated, Specification Notes:
Rubber-coated cast iron wheels reduce transmitted vibration, which helps maintain a cleaner cut surface and extends blade life.
- Specification Name:
Upper Guide Adjustment, Specification Value:
Rack and pinion, counterbalanced, Specification Notes:
Counterbalancing means the upper guide stays where it is set rather than dropping under its own weight — a practical safety benefit during day-to-day use.
- Specification Name:
Blade Tensioning, Specification Value:
Quick-action, width-specific, Specification Notes:
Quick-action tensioning allows faster blade changes when switching between widths, reducing downtime in a busy workshop.
- Specification Name:
Table Tilt, Specification Value:
Rack and pinion
- Specification Name:
Mitre Gauge, Specification Value:
45° left and right
- Specification Name:
Lower Blade Guide, Specification Value:
Yes, Specification Notes:
The lower guide stabilises the blade below the table, reducing drift and improving cut accuracy — particularly important when resawing under load.
- Specification Name:
Certification, Specification Value:
Full CE specification
- Specification Name:
Construction, Specification Value:
Heavy-duty vertical
- Specification Name:
Optional Accessories, Specification Value:
Available — contact IWM to discuss, Specification Notes:
Speak to IWM at the point of enquiry to confirm which accessories are available for this model and whether they are held in stock at Newark.
- Specification Name:
Price (Ex Works, Newark), Specification Value:
£3,450 + VAT, Specification Notes:
Ex Works Newark — delivery and installation costs should be discussed with IWM at the point of enquiry.
- Product Gallery:
- Image:
- Image:
A straightforwardly built, heavy-duty vertical bandsaw for workshops that resaw, rip, and curve-cut solid timber every day. Cast-iron construction throughout, three-phase power, and quick blade-change tensioning — specified and stocked in the UK by IWM.
- Chosen By List:
- List Item:
Joinery workshops producing doors, windows, or staircases where consistent moulded profiles are a daily requirement
- List Item:
Shops already running curved or shaped components who need a ring fence and sliding table as standard, not as an afterthought
- List Item:
Businesses that use a variety of tooling types and want the flexibility of both a 30mm spindle and a separate collet attachment without changing machines
- This Product List:
- List Item:
You need a sliding table as part of the standard package — it is included here, not an optional extra
- List Item:
Your work involves curved or shaped components and you need a ring fence ready to use from day one
- List Item:
You want tooling flexibility with both the MK5 tapered spindle and collet attachment supplied together
- List Item:
You run repeat batch profiles and need a reliable height readout to return to recorded settings quickly
- Alternate List:
- List Item:
Your work involves angled or bevelled mouldings — the <a href="index.php?option=com_content&view=article&id=106&catid=31">Tilting Spindle Moulder IWM Soukup</a> is designed for that application and would be a more appropriate choice
- List Item:
You do not need a sliding table and would prefer a simpler, more compact machine — a standard spindle moulder without the sliding table may suit lower-complexity work better
- List Item:
Your throughput is very low and the full capability of this machine would rarely be used — discuss with IWM whether a lighter-duty option makes more sense for your situation
- Key Specifications:
- Specification Name:
Spindle Speeds, Specification Value:
4,000 / 6,000 / 8,000 / 10,000 RPM, Specification Notes:
Four discrete speeds let you match the spindle to the tooling diameter and timber species — slower speeds for large-diameter cutters, higher speeds for fine profiling work.
- Specification Name:
Max. Tool Diameter, Specification Value:
300 mm
- Specification Name:
Table Size, Specification Value:
1,000 × 750 mm, Specification Notes:
A generous table area supports longer workpieces without additional outfeed support in most joinery applications.
- Specification Name:
Rise & Fall Display, Specification Value:
LED, 0.1 mm resolution, Specification Notes:
Digital readout to a tenth of a millimetre means height settings can be recorded and returned to accurately, which matters when running repeat batch profiles.
- Full Specifications:
- Specification Name:
Model, Specification Value:
IWM Soukup ST-SM
- Specification Name:
Spindle Diameter, Specification Value:
30 mm
- Specification Name:
Spindle Type, Specification Value:
MK5 Tapered Removable Spindle, Specification Notes:
The MK5 taper means the spindle itself can be swapped out, so you are not permanently committed to one spindle size if your tooling requirements change.
- Specification Name:
Spindle Useable Length, Specification Value:
150 mm
- Specification Name:
Collet Spindle Attachment, Specification Value:
Included (for dovetailing), Specification Notes:
The separate collet attachment is supplied as standard, giving you dovetailing capability without a second machine.
- Specification Name:
Spindle Speeds, Specification Value:
4,000 / 6,000 / 8,000 / 10,000 RPM
- Specification Name:
Max. Tool Diameter, Specification Value:
300 mm
- Specification Name:
Rise & Fall, Specification Value:
Yes — LED display to 0.1 mm
- Specification Name:
Table Size, Specification Value:
1,000 × 750 mm
- Specification Name:
Table Height, Specification Value:
850 mm
- Specification Name:
Sliding Table, Specification Value:
Included — with heavy-duty cramp and end stop, Specification Notes:
The cramp and end stop arrangement allows consistent, repeatable cuts when machining multiple identical components.
- Specification Name:
Ring Fence, Specification Value:
Included, Specification Notes:
Supplied as standard for curved and shaped work — no additional purchase required.
- Specification Name:
Power Feed Provision, Specification Value:
Machine pre-wired and table pre-drilled, Specification Notes:
If your volume grows to the point where a power feed is worthwhile, the machine is already prepared for one — no retrofitting needed.
- Specification Name:
Machine Weight, Specification Value:
580 kg, Specification Notes:
At 580 kg, floor loading should be checked before installation, particularly on suspended or upper-floor workshop premises.
- Specification Name:
Motor / Power Supply, Specification Value:
Contact IWM to confirm, Specification Notes:
Electrical supply requirements vary by specification — talk to us before ordering to ensure your workshop supply is compatible.
- Specification Name:
Manufacturer, Specification Value:
Soukup Woodworking Machinery (Czech Republic), Specification Notes:
Soukup is a family-owned Czech manufacturer specialising in machinery for wooden windows, doors, and timber-frame construction, with installations across the UK and internationally.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
A heavy-duty spindle moulder with sliding table, ring fence, and collet attachment included as standard — built for joinery workshops that need to move between straight profiling, curved work, and dovetailing without switching machines.
- Chosen By List:
- List Item:
Joinery and furniture workshops regularly processing wide or thick hardwood boards where surface finish quality is non-negotiable
- List Item:
Bespoke timber operations that need accurate, repeatable settings across long production runs without constant manual re-adjustment
- List Item:
Workshops with the floor space and structural capacity to accommodate a machine built for long-term heavy use rather than occasional light work
- This Product List:
- List Item:
You are regularly surfacing hardwoods or wide boards and need a machine with the mass and rigidity to hold accuracy under sustained load
- List Item:
Surface finish quality is critical to your output and you want the reduced tearout and quieter operation that a spiral helical cutterblock delivers over straight knives
- List Item:
You need powered, digitally-displayed table height adjustment to set depths quickly and accurately across a busy production day
- List Item:
You have the floor space, structural floor loading capacity, and extraction infrastructure to install and run a machine of this scale properly
- Alternate List:
- List Item:
Your planing width requirement is consistently under 400mm — a narrower machine will cost less to buy and run without sacrificing anything for your actual work; talk to us about the lighter-duty options in our surface planer range
- List Item:
Your workshop processes predominantly softwoods at lower volumes, where a less heavily built machine without powered table adjustment may represent better value; ask us which mid-range model suits your throughput
- List Item:
Your floor loading or available floorspace cannot accommodate a 770kg, 2650mm-deep machine — talk to us about what smaller-footprint options exist
- List Item:
Budget is the primary constraint and the powered table and helical block are more than your work requires — a manual-adjust straight-knife planer may serve your needs at significantly lower cost; we can discuss what is available at enquiry stage
- Key Specifications:
- Specification Name:
Planing Width, Specification Value:
500mm
- Specification Name:
Cutterblock, Specification Value:
Spiral helical, 120mm diameter, 4500 RPM, Specification Notes:
A spiral helical block with 4-sided reversible knives produces a significantly quieter cut than straight-knife blocks and allows individual inserts to be rotated rather than the full set being replaced, reducing both downtime and tooling cost over time.
- Specification Name:
Infeed Table, Specification Value:
1420mm with powered rise & fall and digital display, Specification Notes:
Powered rise and fall with a digital readout removes the need for manual depth gauging, which is a meaningful time saving when you are setting up repeatedly across different material thicknesses.
- Specification Name:
Machine Weight, Specification Value:
770kg, Specification Notes:
At 770kg this machine will require a structural floor loading check before installation — consult your building surveyor if you are unsure of your workshop's capacity.
- Full Specifications:
- Specification Name:
Planing Width, Specification Value:
500mm
- Specification Name:
Infeed Table Length, Specification Value:
1420mm
- Specification Name:
Infeed Table Adjustment, Specification Value:
Powered rise & fall with electronic digital display
- Specification Name:
Outfeed Table Length, Specification Value:
1180mm
- Specification Name:
Total Table Dimensions, Specification Value:
500mm x 2600mm
- Specification Name:
Fence Material, Specification Value:
Solid cast iron
- Specification Name:
Fence Height, Specification Value:
200mm
- Specification Name:
Fence Tilt, Specification Value:
0–45° via rack and pinion, Specification Notes:
Rack and pinion movement gives controlled, repeatable fence tilt for consistent bevel work rather than relying on clamped freehand adjustment.
- Specification Name:
Cutterblock Type, Specification Value:
Spiral helical with 4-sided reversible knives
- Specification Name:
Cutterblock Diameter, Specification Value:
120mm
- Specification Name:
Cutterblock Speed, Specification Value:
4500 RPM
- Specification Name:
Motor Power, Specification Value:
7.5 HP / 4kW, Specification Notes:
A machine of this class and weight is designed for three-phase supply — confirm your workshop has an adequate three-phase connection and the correct amperage capacity with your electrician before ordering.
- Specification Name:
Electrical Supply, Specification Value:
Three-phase — confirm supply requirements with IWM at point of enquiry
- Specification Name:
Overall Machine Dimensions, Specification Value:
900 x 2650 x 1250mm (W x D x H), Specification Notes:
Allow additional clearance beyond the machine footprint for workpiece infeed and outfeed on both sides, and for extraction ducting — a minimum of 1.5–2m each end is a practical working guide for the longest boards you intend to process.
- Specification Name:
Machine Weight, Specification Value:
770kg
- Specification Name:
Manufacturer, Specification Value:
Soukup Woodworking Machinery (Czech Republic)
- Specification Name:
Noise Level, Specification Value:
Contact IWM for confirmed noise data, Specification Notes:
Noise levels for surface planers of this class typically exceed 80dB in operation — discuss acoustic treatment and PPE requirements with us when specifying the installation.
- Specification Name:
Extraction Spigot Size, Specification Value:
Contact IWM for confirmed spigot diameter, Specification Notes:
Ensure your extraction contractor knows the confirmed spigot size before sizing ducting — we can supply this detail at point of enquiry.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
A 500mm heavy-duty surface planer with spiral helical cutterblock and powered, digitally-displayed infeed table — built for workshops that process hardwoods regularly and cannot afford compromises on surface finish or setup time.
- Chosen By List:
- List Item:
Joinery shops running moulded sections, window components, or door parts who need consistent, repeatable spindle positioning
- List Item:
Workshops producing curved or shaped work who need a ring fence arrangement as part of their standard setup
- List Item:
Businesses that want to add a power feed in future without retrofitting — the machine arrives pre-wired and table-drilled for one
- This Product List:
- List Item:
Your work regularly involves angled or tilted profiles — window cills, splayed components, or similar — where a fixed-spindle machine would require angled tooling or jigs instead
- List Item:
You need repeatable, precise positioning and want digital readout for both height and tilt rather than relying on manual scales
- List Item:
Curved work forms part of your production and you want the ring fence arrangement included as standard rather than as an afterthought
- List Item:
You are not running a sliding table workflow and a standard table with pre-drilled power feed provision meets your current and near-future needs
- Alternate List:
- List Item:
Your work involves tenoning, panel raising, or processing larger frame components where a sliding table would improve accuracy and operator safety — in which case the IWM Soukup ST-SM Sliding Table Spindle Moulder is worth discussing
- List Item:
Your volume or the nature of your work means a power feed is not optional but essential from day one — confirm the power feed compatibility with IWM before specifying this model
- List Item:
Your workshop electrical supply is single-phase only — speak to IWM to confirm the motor specification before proceeding, as this machine requires a 3-phase supply
- List Item:
You are running very high daily production volumes where a heavier-duty or more automated setup may be more appropriate — talk to IWM about the full Soukup range
- Key Specifications:
- Specification Name:
Spindle Tilt, Specification Value:
+45° / −5°, Specification Notes:
The tilting range covers the vast majority of angled moulding work; the LED display lets you return to a saved angle without trial and error.
- Specification Name:
Spindle Speeds, Specification Value:
3,200 / 4,200 / 6,000 / 8,000 RPM, Specification Notes:
Four fixed speeds allow you to match cutter speed to tool diameter and timber species — larger tools generally require the lower speeds for safe operation.
- Specification Name:
Max. Tool Diameter, Specification Value:
300 mm
- Specification Name:
Table Size, Specification Value:
1,050 × 800 mm, Specification Notes:
A generously sized table supports longer workpieces without additional outfeed support in many typical joinery applications.
- Full Specifications:
- Specification Name:
Model, Specification Value:
TSM
- Specification Name:
Spindle Tilt, Specification Value:
+45° / −5°, Specification Notes:
The tilting range covers the vast majority of angled moulding work; the LED display lets you return to a saved angle without trial and error.
- Specification Name:
Spindle Useable Length, Specification Value:
150 mm, Specification Notes:
Sufficient for stacking tooling blocks on the spindle — confirm with IWM if you intend to run particularly tall cutter assemblies.
- Specification Name:
Rise & Fall Adjustment, Specification Value:
LED display to 0.1 mm, Specification Notes:
Digital readout to a tenth of a millimetre makes it straightforward to return to a precise height between runs.
- Specification Name:
Tilt Adjustment, Specification Value:
LED display to 0.1°
- Specification Name:
Table Size, Specification Value:
1,050 × 800 mm
- Specification Name:
Table Height, Specification Value:
900 mm
- Specification Name:
Spindle Speeds, Specification Value:
3,200 / 4,200 / 6,000 / 8,000 RPM, Specification Notes:
Four fixed speeds allow you to match cutter speed to tool diameter and timber species — larger tools generally require the lower speeds for safe operation.
- Specification Name:
Table Ring Diameters, Specification Value:
115 / 170 / 220 / 270 / 345 mm, Specification Notes:
A range of insert rings allows you to close down the table aperture around smaller tooling, reducing the gap and improving workpiece support.
- Specification Name:
Ring Fence for Curved Work, Specification Value:
Included, Specification Notes:
Allows shaped or curved workpieces to be run safely against a curved bearing surface rather than a straight fence.
- Specification Name:
Power Feed Provision, Specification Value:
Pre-wired and table-drilled, Specification Notes:
If you anticipate adding a power feed later, the groundwork is already done — no retrofit wiring or table modification required.
- Specification Name:
Max. Tool Diameter, Specification Value:
300 mm
- Specification Name:
Machine Weight, Specification Value:
600 kg, Specification Notes:
At 600 kg, floor loading should be verified before installation, particularly on upper floors or older workshop structures.
- Specification Name:
Availability, Specification Value:
Stock item
- Specification Name:
Motor / Power Supply, Specification Value:
3-phase supply required — contact IWM for exact motor rating, Specification Notes:
Verify your workshop has a suitable 3-phase supply before ordering; IWM can confirm the specific motor rating and amperage draw on request.
- Specification Name:
Noise Level, Specification Value:
Contact IWM for measured noise data, Specification Notes:
If acoustic treatment or hearing protection requirements are a consideration in your workshop, ask IWM for the declared noise emission figure before specifying.
- Specification Name:
Machine Dimensions (footprint), Specification Value:
Contact IWM for confirmed dimensions, Specification Notes:
Allow additional clearance on all sides for operator access, workpiece feed, and extraction ducting.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
A tilting spindle moulder with LED-accurate rise, fall, and angle control — built for joinery and bespoke workshops that need repeatable, precise profiles without time-consuming trial and error.
- Chosen By List:
- List Item:
Off-site timber frame manufacturers who need to move finished or part-assembled wall panels between assembly, insulation, and wrapping stations without disrupting production flow
- List Item:
SIP panel fabricators working with panels up to 12m in length where manual movement is a safety or quality risk
- List Item:
Workshops scaling up off-site production capacity and looking to reduce reliance on forklift movements within the factory floor
- This Product List:
- List Item:
You are moving timber frame or SIP panels of up to 12m in length between fixed workstations and need a dedicated, repeatable handling solution rather than ad-hoc forklift movements
- List Item:
Your production volume means panel transit is a regular, daily activity and manual handling is either a safety concern or a bottleneck
- List Item:
You are laying out a new off-site manufacturing line and want panel movement integrated into the station-to-station workflow from the start
- List Item:
You are working alongside other Soukup timber frame equipment — assembly tables, cross-cut saws — and need panel handling that fits within the same production system
- Alternate List:
- List Item:
You need horizontal flat-bed storage between production runs rather than active transit — the Soukup Track Storage system may be more appropriate for that purpose
- List Item:
Your panels are shorter or lighter and a simpler manual or semi-manual handling solution would suffice — talk to us about whether a full motorised transporter is justified at your current volumes
- List Item:
Your facility layout does not permit fixed transverse tracks — speak to us about your floor plan and we can advise on whether alternative handling arrangements within the Soukup range are suitable
- List Item:
You are at an earlier stage of production setup and your immediate priority is cutting or assembly — the Soukup Framer Modular Assembly Table or Framer Profi system may be the right starting point before investing in panel transport infrastructure
- Key Specifications:
- Specification Name:
Working Length, Specification Value:
6m, 9m, or 12m, Specification Notes:
The working length should be matched to your longest panel size — confirm the configuration required before ordering, as this will determine the track layout and floor space commitment.
- Specification Name:
Load Capacity, Specification Value:
2,000 kg, Specification Notes:
At 2,000 kg, floor loading beneath the track system should be verified with your structural engineer, particularly in mezzanine or older industrial building scenarios.
- Specification Name:
Drive System, Specification Value:
Motorised, electronically controlled feed rate, Specification Notes:
Electronic feed rate control allows the operator to move panels at a consistent, adjustable speed — reducing the risk of panel damage or instability during transit.
- Specification Name:
Control Panel, Specification Value:
Relocatable, Specification Notes:
A relocatable control panel means the operator can position themselves at the safest vantage point during panel movement, which is a practical benefit in busy production environments.
- Full Specifications:
- Specification Name:
Working Length Options, Specification Value:
6m / 9m / 12m, Specification Notes:
These are the standard configurations — bespoke or intermediate track lengths may be available on request; discuss your exact panel sizes with us before specifying.
- Specification Name:
Load Capacity, Specification Value:
2,000 kg, Specification Notes:
At 2,000 kg, floor loading beneath the track system should be verified with your structural engineer, particularly in mezzanine or older industrial building scenarios.
- Specification Name:
Movement Type, Specification Value:
Motorised, along transverse tracks
- Specification Name:
Feed Rate Control, Specification Value:
Smooth, electronically controlled
- Specification Name:
Control Panel, Specification Value:
Relocatable, Specification Notes:
A relocatable control panel means the operator can position themselves at the safest vantage point during panel movement, which is a practical benefit in busy production environments.
- Specification Name:
Manufacturer, Specification Value:
Soukup s.r.o. (Czech Republic)
- Specification Name:
Machine Weight, Specification Value:
Confirm with IWM at time of enquiry, Specification Notes:
Machine weight varies by track length configuration — contact us with your chosen working length and we will confirm the figure and advise on any floor loading implications.
- Specification Name:
Power Requirement, Specification Value:
Confirm with IWM at time of enquiry, Specification Notes:
Electrical supply requirements depend on track length and motor specification — confirm phase and amperage with us before ordering to ensure your supply is adequate.
- Specification Name:
Overall Footprint, Specification Value:
Determined by track length configuration, Specification Notes:
Additional clearance is required at each end of the track for panel overhang and operator access — allow for this when planning your factory layout.
- Specification Name:
CE / UKCA Certification, Specification Value:
Confirm with IWM at time of enquiry, Specification Notes:
Certification status should be confirmed before purchase — talk to us and we will verify the applicable conformity documentation for UK supply.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
A dedicated motorised track system for moving full-size timber frame and SIP panels — up to 12m long and 2,000 kg — between assembly, insulation, and wrapping stations without a forklift. Built for off-site manufacturers who need panel transit to be safe, repeatable, and integrated into the production line.
