- Chosen By List:
- List Item:
Joinery shops producing door components, window sections, or similar profiled stock who need consistent four-sided accuracy without multiple machine passes
- List Item:
Furniture manufacturers running repeated section sizes where repeatability across a batch is more important than frequent size changes
- List Item:
Timber merchants and processors finishing sawn stock to precise dimensions for trade or contract supply
- This Product List:
- List Item:
Your sections run up to 180 mm wide and you need a reliable four-sided finish in one pass without the footprint or cost of a larger machine
- List Item:
You are a joinery or furniture workshop running consistent section sizes where setup simplicity and day-to-day repeatability matter more than frequent profile changes
- List Item:
You are stepping up from separate surfacer and thicknesser operations and want to consolidate four-sided finishing into a single machine
- List Item:
Your production volume suits a straightforward four-sided planer rather than a full moulder with multiple profiling heads
- Alternate List:
- List Item:
Your material regularly exceeds 180 mm wide — the GL-645 handles widths up to 450 mm and may be a better fit
- List Item:
You need profiling or moulding capability alongside four-sided planing — the GS-423, GS-523 or GN-5S23/GN-6S23 range combines planing and moulding in a single machine
- List Item:
You require complex or varied profile work across multiple heads — the GH-623 or GL-630 dedicated moulders are worth discussing with us
- List Item:
Your throughput demands suggest a heavier-duty or higher-spindle machine — talk to us and we can compare the full Soukup range against your production requirements
- Key Specifications:
- Specification Name:
Max Working Width, Specification Value:
180 mm, Specification Notes:
Sets the upper limit on section size this machine can process — confirm your widest recurring component falls within this before specifying.
- Specification Name:
Sided Operation, Specification Value:
Four-sided in one pass, Specification Notes:
All four faces are planed in a single pass through the machine, removing the need to re-feed stock through separate operations and reducing handling time.
- Specification Name:
Number of Spindles, Specification Value:
4 (independent motors), Specification Notes:
Each spindle has its own dedicated motor rather than sharing drives between the side heads — this maintains consistent cutting performance across all four faces simultaneously.
- Specification Name:
Feed Speeds, Specification Value:
6 / 12 m/min (2 speeds), Specification Notes:
The lower speed is suited to harder species or deeper cuts; the higher speed increases throughput on straightforward dressed stock.
- Full Specifications:
- Specification Name:
Max Working Width, Specification Value:
180 mm, Specification Notes:
Sets the upper limit on section size this machine can process — confirm your widest recurring component falls within this before specifying.
- Specification Name:
Min Working Width, Specification Value:
Contact IWM to confirm
- Specification Name:
Max Working Height, Specification Value:
Contact IWM to confirm
- Specification Name:
Min Working Height, Specification Value:
Contact IWM to confirm
- Specification Name:
Number of Spindles, Specification Value:
4 (independent motors), Specification Notes:
Each spindle has its own dedicated motor rather than sharing drives between the side heads — this maintains consistent cutting performance across all four faces simultaneously.
- Specification Name:
Spindle Speed, Specification Value:
Contact IWM to confirm
- Specification Name:
Feed Speed, Specification Value:
6 / 12 m/min (2 speeds), Specification Notes:
The lower speed is suited to harder species or deeper cuts; the higher speed increases throughput on straightforward dressed stock.
- Specification Name:
Motor Power (total), Specification Value:
Contact IWM to confirm, Specification Notes:
Three-phase supply will be required — confirm availability at the intended installation point with your electrician before ordering.
- Specification Name:
Electrical Supply, Specification Value:
Three-phase — contact IWM to confirm full amperage requirement, Specification Notes:
Confirm available phase and amperage with your electrician prior to ordering.
- Specification Name:
Infeed Table Length, Specification Value:
1,700 mm, Specification Notes:
The 1,700 mm straightening table allows bowed or cupped stock to be referenced and corrected before it reaches the first cutter head.
- Specification Name:
Machine Dimensions (L × W × H), Specification Value:
Contact IWM to confirm, Specification Notes:
Allow additional clearance at both the infeed and outfeed ends for the length of stock you intend to process.
- Specification Name:
Machine Weight, Specification Value:
Contact IWM to confirm
- Specification Name:
Extraction Connection, Specification Value:
Contact IWM to confirm
- Specification Name:
Noise Level, Specification Value:
Contact IWM to confirm
A through-feed four-sided planer that finishes all four faces of a section in one pass, with four independent spindle motors and a 1,700 mm straightening infeed table — suited to joinery and timber workshops that need consistent, repeatable dressed stock without the complexity of a full moulder.
- Chosen By List:
- List Item:
Timber processing operations running consistent profiles at volume who need a reliable, repeatable finish without constant re-setup
- List Item:
Joinery and furniture manufacturers who require fine surface quality straight off the machine, reducing downstream sanding or finishing time
- List Item:
Workshops stepping up from lighter-duty moulders who need independent spindle control and variable feed speed to handle a wider range of section sizes and species
- This Product List:
- List Item:
Your production is at medium-to-high volume and you need a machine that will hold up to consistent daily use — the cast iron construction is a meaningful step up from lighter fabricated-frame moulders
- List Item:
You're running complex profiles or multiple section sizes and want the flexibility of 5 to 8 spindles with independent adjustment on each head
- List Item:
Fine surface finish off the machine is important to your process and you want to reduce time spent on downstream sanding or finishing
- List Item:
You need repeatable setup across multiple profiles — the mechanical digital readouts on each spindle make returning to a previous setting straightforward
- Alternate List:
- List Item:
Your volume is lower or your profile range is simpler — the Soukup GS-423 or GS-523 may be a more appropriate and cost-effective starting point; talk to us about where the crossover is
- List Item:
You need a wider working width than the GN series offers — the GL-645 (450 mm capacity) or GL-630 (300 mm capacity) may be worth considering depending on your maximum section size
- List Item:
Your requirement is primarily straightforward four-side planing rather than complex moulding profiles — the <a href="index.php?option=com_content&view=article&id=77&catid=27">Four-Sided Planer Model 180 PSE</a> may be better suited and easier to maintain
- List Item:
You are running a smaller joinery workshop with intermittent rather than sustained production — the <a href="index.php?option=com_content&view=article&id=80&catid=27">GH-623 Moulder</a> may better match your throughput and floor space constraints
- Key Specifications:
- Specification Name:
Spindle Configuration, Specification Value:
5, 6, 7, or 8 spindles, Specification Notes:
More spindles allow additional profile passes in a single run, reducing the need for multiple passes or secondary operations — worth discussing against your profile complexity before specifying.
- Specification Name:
Feed Speed, Specification Value:
6–40 m/min (variable), Specification Notes:
Variable feed speed allows you to adjust for different species and section sizes without changing the machine setup, which matters when your production mix changes regularly.
- Specification Name:
Working Width, Specification Value:
10–230 mm, Specification Notes:
If your maximum section exceeds 230 mm, speak to us about the GL-645 (450 mm capacity) or GL-630 (300 mm capacity) before specifying.
- Specification Name:
Total Installed Power, Specification Value:
Varies by spindle count (see full spec), Specification Notes:
This machine requires a three-phase supply; confirm available amperage at your distribution board before ordering.
- Full Specifications:
- Specification Name:
Model Variants, Specification Value:
GN-5S23 (5 spindle), GN-6S23 (6 spindle); 7 and 8 spindle configurations also available
- Specification Name:
Number of Spindles, Specification Value:
5 to 8 (buyer's choice), Specification Notes:
Each additional spindle adds a working head — useful if your profiles require multiple moulding passes or if you want a dedicated spindle for thicknessing separate from profiling.
- Specification Name:
Spindle Adjustment, Specification Value:
Vertically and horizontally adjustable, independent drive per spindle
- Specification Name:
Thickness Spindle, Specification Value:
Adjustable independently from the feeder, Specification Notes:
Independent thickness adjustment means you can fine-tune the finished dimension without altering your feed settings — useful when working to tight tolerances.
- Specification Name:
Spindle Setup, Specification Value:
Mechanical digital readouts on all spindles, Specification Notes:
Digital readouts allow repeatable setup when returning to a previous profile, reducing downtime between production runs.
- Specification Name:
Feed Unit, Specification Value:
Variable speed; steel and rubber feed wheels under pneumatic pressure
- Specification Name:
Short/Narrow Workpiece Handling, Specification Value:
Side front pressure plate on left vertical spindle, Specification Notes:
This assists smooth feeding of short or narrow sections that would otherwise chatter or stall — relevant if your production includes smaller mouldings or window components.
- Specification Name:
Working Table, Specification Value:
Chromed cast iron; powered roller after last spindle
- Specification Name:
Lubrication, Specification Value:
Centralised lubrication system
- Specification Name:
Air Pressure Regulation, Specification Value:
Centralised
- Specification Name:
Control Layout, Specification Value:
All spindle control levers located at front of machine
- Specification Name:
Frame Construction, Specification Value:
Cast iron
- Specification Name:
Certification, Specification Value:
CE certified, Specification Notes:
CE certification confirms the machine meets European machinery safety directives — a baseline legal requirement for use in the UK and EU.
- Specification Name:
Working Width (max), Specification Value:
230 mm (min 10 mm)
- Specification Name:
Working Height (max), Specification Value:
160 mm (min 7 mm)
- Specification Name:
Feed Speed Range, Specification Value:
6–40 m/min (variable via frequency inverter), Specification Notes:
The inverter-driven feed allows smooth stepless adjustment across the full range — no mechanical speed changes needed when switching between species or section sizes.
- Specification Name:
Spindle Speed, Specification Value:
6,000 rpm
- Specification Name:
Total Installed Power, Specification Value:
Varies by spindle count; individual spindle motors typically 7.5 kW each (confirm with IWM at enquiry stage), Specification Notes:
Confirm three-phase supply and amperage availability at your site before ordering; total draw will depend on the spindle count you specify.
- Specification Name:
Machine Dimensions (L × W × H), Specification Value:
Contact IWM to confirm — varies by spindle configuration, Specification Notes:
Allow additional clearance at the infeed and outfeed ends for full-length stock, and overhead clearance for extraction ducting.
- Specification Name:
Machine Weight, Specification Value:
Contact IWM to confirm — varies by spindle configuration, Specification Notes:
Floor loading capacity should be checked before installation; cast iron construction machines of this class typically exceed 500 kg.
- Specification Name:
Extraction Connection, Specification Value:
Contact IWM to confirm connection diameter and quantity
- Specification Name:
Noise Level, Specification Value:
Contact IWM to confirm
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=UVGLQNLoPg0
A cast iron four-side moulder built for medium-to-high volume production, where consistent profile quality and repeatable setup matter more than anything else. Available in 5, 6, 7, or 8 spindle configurations to match your profile complexity.
- Chosen By List:
- List Item:
Joinery shops producing glazed frames who need consistently clean bead ends without hand-finishing
- List Item:
Window and door manufacturers running glazing bead in volume who want a safe, repeatable process with pneumatic clamping
- List Item:
Workshops where break-out on scribed bead ends is causing rejects or rework
- This Product List:
- List Item:
Your workshop produces glazed frames and bead end break-out is a consistent quality problem
- List Item:
You need a dedicated, repeatable scribing process rather than relying on a router table or hand methods
- List Item:
Operator safety and consistent clamping are priorities — the pneumatic interlock removes a manual step
- List Item:
You want a simple, single-purpose machine that any competent operator can run with minimal setup
- Alternate List:
- List Item:
You need to scribe along the full length of the bead as well as the ends — consider the <a href="index.php?option=com_content&view=article&id=52&catid=20">Copenstick STP</a>, PIN, UNI, or TDL, which are designed for profile scribing along the bead run
- List Item:
Your volume is lower and you are looking for a more flexible end-scribing solution — the <a href="index.php?option=com_content&view=article&id=49&catid=20">Dan-List PME 100 Endscribe Machine</a> may be worth comparing directly
- List Item:
You need a combined or multi-operation machine to reduce your machine count — talk to us about whether a Copenstick variant covers both requirements
- List Item:
You are unsure whether your bead profiles fall within the capacity of the HEP — contact IWM with your profile dimensions before ruling out alternatives
- Key Specifications:
- Specification Name:
Scribing Method, Specification Value:
Dual counter-rotating vertical spindles, Specification Notes:
Counter-rotating spindles approach the cut from both directions simultaneously, which is what eliminates break-out on the end grain — a common failure point with single-direction routing.
- Specification Name:
Clamping, Specification Value:
Pneumatic, interlocked to start, Specification Notes:
The interlock means the machine cannot cycle unless the clamp is engaged, reducing the risk of the workpiece moving during the cut.
- Specification Name:
Operation, Specification Value:
5-step manual feed cycle
- Specification Name:
Power Supply, Specification Value:
Confirm with IWM at point of enquiry, Specification Notes:
Electrical supply requirements are not published and vary by build — confirm phase and amperage with us before ordering to ensure your workshop supply is compatible.
- Full Specifications:
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Specification Name:
Machine Type, Specification Value:
End profile scribing machine
- Specification Name:
Scribing Method, Specification Value:
Dual counter-rotating vertical spindles, Specification Notes:
Counter-rotating spindles approach the cut from both directions simultaneously, which is what eliminates break-out on the end grain — a common failure point with single-direction routing.
- Specification Name:
Clamping, Specification Value:
Pneumatic, interlocked to start, Specification Notes:
The interlock means the machine cannot cycle unless the clamp is engaged, reducing the risk of the workpiece moving during the cut.
- Specification Name:
Feed Method, Specification Value:
Manual left/right traverse by operator
- Specification Name:
Operation Steps, Specification Value:
5-step cycle (load, clamp, start, traverse, release)
- Specification Name:
Dimensions, Specification Value:
Available on request, Specification Notes:
Allow additional clearance for operator access and bead handling on both sides of the machine — confirm footprint with IWM before siting.
- Specification Name:
Weight, Specification Value:
Available on request
- Specification Name:
Power Supply, Specification Value:
Available on request, Specification Notes:
Electrical supply requirements are not published and vary by build — confirm phase and amperage with us before ordering to ensure your workshop supply is compatible.
- Specification Name:
Pneumatic Supply Required, Specification Value:
Yes — pressure and flow rate available on request, Specification Notes:
A compressed air supply is required for the clamping system — confirm pressure and flow rate with IWM before installation.
- Specification Name:
Spindle Speed, Specification Value:
Available on request
- Specification Name:
Tooling, Specification Value:
Custom profile cutters, supplied to your bead profile — included with machine order, Specification Notes:
One set of cutters matched to your bead profile is supplied with the machine, made and delivered ready to use; additional profile sets are available separately.
- Specification Name:
Max Bead Width / Height Capacity, Specification Value:
Available on request, Specification Notes:
Confirm against your bead profile range before specifying — contact IWM with your profile dimensions.
- Specification Name:
Noise Level, Specification Value:
Available on request
- Specification Name:
CE Marked, Specification Value:
Available on request — confirm with IWM, Specification Notes:
CE marking confirms the machine meets applicable EU/UK machinery safety directives; verify this at point of enquiry if required for your risk assessment or insurance.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=OPrjLH0TLjE
A dedicated end profile scribing machine for glazing beads, designed to eliminate break-out on end grain without hand-finishing. Built for joinery shops and window manufacturers who need a consistent, repeatable result every cycle.
- Chosen By List:
- List Item:
Joinery and timber workshops looking to offset waste disposal costs by converting shavings and dust into saleable or burnable briquettes
- List Item:
Businesses with continuous production runs who need a press that doesn't require manual cycling between batches
- List Item:
Workshops seeking a used machine at a lower entry cost than a new equivalent, where output in the 60–70 kg/hour range comfortably meets their waste volume
- This Product List:
- List Item:
Your workshop generates enough waste to justify a dedicated briquette press and 60–70 kg/hour output comfortably handles your volume
- List Item:
You need continuous operation rather than a machine that stops between cycles
- List Item:
You want to enter briquetting at a lower capital cost and a good-condition used machine is acceptable
- List Item:
You have a confirmed 3-phase 32A supply and floor loading capacity to suit a 1,270 kg machine
- Alternate List:
- List Item:
Your waste volumes are higher and you need greater throughput — talk to us about the IWM Falach 70 and other higher-capacity briquetting options in our current range
- List Item:
You prefer a new or ex-demo machine with known provenance — the BrikStar EK (ex-demo) may be a more appropriate starting point for that conversation
- List Item:
Your workshop runs on single-phase power only — this machine cannot be adapted for single-phase supply
- List Item:
Your production is intermittent or low-volume and the output of this press would exceed your actual waste generation, leaving the machine underutilised
- Key Specifications:
- Specification Name:
Output, Specification Value:
60–70 kg/hour, Specification Notes:
At a typical shavings bulk density, this equates to a meaningful reduction in skip or bag waste over a full production shift.
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Operation, Specification Value:
Continuous, Specification Notes:
The machine runs without stopping between cycles, which suits workshops with a steady, uninterrupted feed of waste material rather than batch processing.
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A — 7.5 kW pump motor, Specification Notes:
Confirm your workshop has a 3-phase 32A supply available before ordering — this is not suitable for single-phase installations.
- Full Specifications:
- Specification Name:
Production, Specification Value:
60–70 kg/hour
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Dimensions (L × W × H), Specification Value:
1940 × 1250 × 1470 mm, Specification Notes:
Allow additional clearance around all sides for material feed, extraction ducting, and safe operator access — the footprint alone will not reflect the full space required.
- Specification Name:
Weight, Specification Value:
1270 kg, Specification Notes:
At over 1,000 kg, floor loading capacity should be verified with your building surveyor or structural engineer before installation.
- Specification Name:
Pump Motor Input, Specification Value:
7.5 kW
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A, Specification Notes:
Confirm supply availability with your electrician before specifying this machine.
- Specification Name:
Operation, Specification Value:
Continuous
- Specification Name:
Automatic Switch-out, Specification Value:
Yes, Specification Notes:
The machine will shut itself down automatically under defined conditions, reducing the need for constant operator supervision during a run.
- Specification Name:
Oil Cooler, Specification Value:
No, Specification Notes:
Without an oil cooler, hydraulic oil temperature should be monitored during extended runs — speak to IWM if your workshop operates the machine for prolonged periods without breaks.
- Specification Name:
Noise Level, Specification Value:
68 dB, Specification Notes:
68 dB is roughly equivalent to a normal conversation at close range — acoustic treatment is unlikely to be required at this level, though workplace noise assessments should still follow standard practice.
- Specification Name:
Condition, Specification Value:
Used, Specification Notes:
Service history, hours of use, and any work carried out prior to sale are available on request — contact IWM directly for full details before specifying.
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Product Gallery:
- Image:
- Image:
A used hydraulic briquette press producing 60–70 kg/hour of 60mm briquettes from wood shavings and dust. A practical entry point for workshops that want to cut disposal costs and generate a burnable or saleable by-product from their waste stream.
- Chosen By List:
- List Item:
Joinery and timber workshops looking to offset waste disposal costs by converting shavings and dust into saleable or burnable briquettes
- List Item:
Businesses with continuous production runs who need a press that doesn't require manual cycling between batches
- List Item:
Workshops seeking a used machine at a lower entry cost than a new equivalent, where output in the 60–70 kg/hour range comfortably meets their waste volume
- This Product List:
- List Item:
Your workshop generates enough waste to justify a dedicated briquette press and 60–70 kg/hour output comfortably handles your volume
- List Item:
You need continuous operation rather than a machine that stops between cycles
- List Item:
You want to enter briquetting at a lower capital cost and a good-condition used machine is acceptable
- List Item:
You have a confirmed 3-phase 32A supply and floor loading capacity to suit a 1,270 kg machine
- Alternate List:
- List Item:
Your waste volumes are higher and you need greater throughput — talk to us about the IWM Falach 70 and other higher-capacity briquetting options in our current range
- List Item:
You prefer a new or ex-demo machine with known provenance — the BrikStar EK (ex-demo) may be a more appropriate starting point for that conversation
- List Item:
Your workshop runs on single-phase power only — this machine cannot be adapted for single-phase supply
- List Item:
Your production is intermittent or low-volume and the output of this press would exceed your actual waste generation, leaving the machine underutilised
- Key Specifications:
- Specification Name:
Output, Specification Value:
60–70 kg/hour, Specification Notes:
At a typical shavings bulk density, this equates to a meaningful reduction in skip or bag waste over a full production shift.
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Operation, Specification Value:
Continuous, Specification Notes:
The machine runs without stopping between cycles, which suits workshops with a steady, uninterrupted feed of waste material rather than batch processing.
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A — 7.5 kW pump motor, Specification Notes:
Confirm your workshop has a 3-phase 32A supply available before ordering — this is not suitable for single-phase installations.
- Full Specifications:
- Specification Name:
Production, Specification Value:
60–70 kg/hour
- Specification Name:
Briquette Diameter, Specification Value:
60 mm
- Specification Name:
Dimensions (L × W × H), Specification Value:
1940 × 1250 × 1470 mm, Specification Notes:
Allow additional clearance around all sides for material feed, extraction ducting, and safe operator access — the footprint alone will not reflect the full space required.
- Specification Name:
Weight, Specification Value:
1270 kg, Specification Notes:
At over 1,000 kg, floor loading capacity should be verified with your building surveyor or structural engineer before installation.
- Specification Name:
Pump Motor Input, Specification Value:
7.5 kW
- Specification Name:
Power Supply, Specification Value:
3-phase, 32A, Specification Notes:
Confirm supply availability with your electrician before specifying this machine.
- Specification Name:
Operation, Specification Value:
Continuous
- Specification Name:
Automatic Switch-out, Specification Value:
Yes, Specification Notes:
The machine will shut itself down automatically under defined conditions, reducing the need for constant operator supervision during a run.
- Specification Name:
Oil Cooler, Specification Value:
No, Specification Notes:
Without an oil cooler, hydraulic oil temperature should be monitored during extended runs — speak to IWM if your workshop operates the machine for prolonged periods without breaks.
- Specification Name:
Noise Level, Specification Value:
68 dB, Specification Notes:
68 dB is roughly equivalent to a normal conversation at close range — acoustic treatment is unlikely to be required at this level, though workplace noise assessments should still follow standard practice.
- Specification Name:
Condition, Specification Value:
Used, Specification Notes:
Service history, hours of use, and any work carried out prior to sale are available on request — contact IWM directly for full details before specifying.
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Product Gallery:
- Image:
- Image:
The IWM Soukup Briquette machine is trusted by many customers who rely on it to help them recycle their waste wood into a revenue stream. IWM Machines have become the UK’s leading choice for hydraulic briquette machines, efficiently converting wood waste and other materials into renewable energy briquettes. These briquettes are fully certified under the UK Clean Air Strategy, providing the same heat output as coal while producing no harmful air pollutants.
Soukup is a Czech manufacturer with a long-standing reputation for producing robust crosscut saws, tenoning machines, and briquette presses built to handle the demands of busy production environments. Their range covers everything from straight and angle crosscutting through to waste compaction, making them a natural fit for UK joinery and timber operations. IWM has worked closely with Soukup for many years, and we hold a broad stock of their machines to support short lead times for British workshops.
- Chosen By List:
- List Item:
Joinery and timber frame workshops taking their first steps into off-site panel production who need a proven assembly system without a large upfront investment
- List Item:
Small construction firms or self-builders wanting to move panel assembly in-house for greater control over quality and programme
- List Item:
Established workshops trialling a second, lower-cost assembly station before committing to a higher-capacity table such as the Framer Profi or Framer Line
- This Product List:
- List Item:
You are starting out in prefabricated panel production and want to minimise capital outlay while still using a properly engineered assembly system
- List Item:
Your projected output is up to 10 completed houses per year and you have workshop space to source and build the timber base structure yourself
- List Item:
You want to prove up panel production in-house before committing to a full production-line setup
- Alternate List:
- List Item:
Your output already exceeds 10 houses per year, or you expect it to quickly — the Soukup Framer Profi is built for higher-volume production lines and includes a full steel table structure with pneumatic clamps and pop-up rollers as standard
- List Item:
You need motorised panel-width adjustment or plan to run variable-width panels routinely — the Soukup Framer Line handles panel widths up to 4,260 mm with powered width setting
- List Item:
You are producing panels as part of a continuous production flow with overhead crane handling — the Framer Profi is designed specifically for crane-assisted operations and will integrate more cleanly into that workflow
- Key Specifications:
- Specification Name:
Target Production Capacity, Specification Value:
Up to 10 houses per year, Specification Notes:
This is the practical ceiling for the Framer Basic; if your pipeline already exceeds this, the Framer Profi or Framer Line is worth discussing instead.
- Specification Name:
Gable Wall Extension, Specification Value:
800 mm removable extension, Specification Notes:
The removable 800 mm crossbar extension lets you assemble oversized gable wall panels without a permanent footprint increase.
- Specification Name:
Base Frame Construction, Specification Value:
Buyer-supplied timber base with Soukup Framer componentry, Specification Notes:
You provide the structural timber base to your own floor plan; Soukup supplies the precision Framer hardware — keeping the delivered cost low while the assembly accuracy remains consistent.
- Specification Name:
Panel Types Supported, Specification Value:
All panel types (wall, ceiling, roof)
- Full Specifications:
- Specification Name:
Target Production Capacity, Specification Value:
Up to 10 houses per year, Specification Notes:
Intended for start-up and small-volume operations; higher-volume producers should consider the Framer Profi or Framer Line.
- Specification Name:
Base Frame Supply, Specification Value:
Buyer-supplied structural timber, per Soukup instruction manual, Specification Notes:
Sourcing the timber base locally reduces shipping weight and cost; Soukup provides full instructions.
- Specification Name:
Framer Hardware, Specification Value:
Soukup-supplied modular Framer componentry
- Specification Name:
Gable Wall Extension, Specification Value:
800 mm removable extension included, Specification Notes:
Allows assembly of wider gable panels without permanently extending the table footprint.
- Specification Name:
Panel Types, Specification Value:
Wall panels, ceiling panels, roof panels
- Specification Name:
Table Length Options, Specification Value:
Contact IWM to confirm — configured to suit workshop
- Specification Name:
Clamping System, Specification Value:
Soukup Framer clamping technology — contact IWM for detail
- Specification Name:
Working Height, Specification Value:
Contact IWM to confirm
- Specification Name:
Delivery Format, Specification Value:
Flat-pack Framer components dispatched to site, Specification Notes:
Flat-pack delivery keeps freight costs down and allows assembly by the buyer's own team.
A practical, low-investment entry point into off-site timber panel production. Designed for workshops starting out in prefabricated house construction, building up to around 10 houses per year.
- Chosen By List:
- List Item:
Timber frame manufacturers who have outgrown single-table or modular assembly setups and need a continuous production line
- List Item:
Off-site construction businesses producing mixed panel types — walls, ceilings, roof sections, and 'H' door and window frames — within the same shift
- List Item:
Workshops handling panels up to 12 m in length where manual handling between stations is a bottleneck or safety concern
- This Product List:
- List Item:
Your business is producing timber frame panels at medium to high volume and a single assembly table is creating a throughput bottleneck
- List Item:
You need to run mixed panel types — walls, roofs, ceilings, and opening frames — within the same production day without lengthy changeovers
- List Item:
You are handling panels up to 12 m and need a safe, powered method of moving panels between assembly and finishing without manual lifting
- List Item:
You are planning or expanding an off-site manufacturing facility and need a line that can grow with structured investment
- Alternate List:
- List Item:
Your volume is lower or your panel range is more limited — the Soukup Framer Modular Assembly Table for Panels may be a more proportionate starting point without the full line commitment
- List Item:
You need panel storage and sequencing before or after assembly rather than a production line — the Timber Frame Off Site Track Storage system addresses that separately
- List Item:
Your primary need is vertical handling and transport of finished panels rather than assembly — the Timber Frame Off Site Panels Vertical Transporter may be sufficient as a standalone addition
- List Item:
Your operation involves primarily cross-cutting and preparation rather than frame assembly — the Soukup Crossline 650 or Crossline 500 would be the appropriate starting point
- Key Specifications:
- Specification Name:
Max Panel Length, Specification Value:
Up to 12 m, Specification Notes:
The 1+1 table configuration means both sections operate independently, allowing a second panel to be assembled while the first is transported — removing the wait time that limits single-table lines.
- Specification Name:
Panel Width Range, Specification Value:
2 m – 4 m, Specification Notes:
Powered width setting means changeover between panel sizes does not require manual re-jigging, which matters when you are running mixed panel types in the same shift.
- Specification Name:
Working Positions, Specification Value:
2 per table (independent clamp pressure), Specification Notes:
Independent clamp pressure on each working position allows simultaneous assembly of panels with different compression requirements without halting the line.
- Specification Name:
Panel Movement, Specification Value:
Integrated rollers with pneumatic lifting
- Full Specifications:
- Specification Name:
Max Panel Length, Specification Value:
Up to 12 m, Specification Notes:
The 1+1 table configuration means both sections operate independently, allowing a second panel to be assembled while the first is transported — removing the wait time that limits single-table lines.
- Specification Name:
Panel Width Range, Specification Value:
2 m – 4 m, Specification Notes:
Powered width setting means changeover between panel sizes does not require manual re-jigging, which matters when you are running mixed panel types in the same shift.
- Specification Name:
Table Configuration, Specification Value:
1+1 separately controlled tables
- Specification Name:
Working Positions, Specification Value:
2 per table (independent clamp pressure), Specification Notes:
Independent clamp pressure on each working position allows simultaneous assembly of panels with different compression requirements without halting the line.
- Specification Name:
Panel Movement, Specification Value:
Integrated rollers with pneumatic lifting
- Specification Name:
Compression Force, Specification Value:
Regulated (variable)
- Specification Name:
Frame Sections Supported, Specification Value:
Straight and sloping; narrow superstructures
- Specification Name:
Panel Types, Specification Value:
Walls, ceilings, roof panels, window and door 'H' semi-finished products
- Specification Name:
Frame Fixing, Specification Value:
Rapid fix and release
- Specification Name:
Construction, Specification Value:
Laser-machined steel profiles, rugged steel construction
- Specification Name:
Line Components, Specification Value:
Tilting tables, vertical transporter, finishing lines, Specification Notes:
The vertical transporter and finishing lines are part of the complete Framer LINE system — confirm with IWM which elements are included in a standard supply and which are specified separately.
- Specification Name:
Overall Dimensions, Specification Value:
Configured to order — contact IWM, Specification Notes:
Floor space planning should include clearance for panel feed, operator access along both sides, and extraction or transport connections at the outfeed end; exact footprint is confirmed at project specification stage.
- Specification Name:
Weight, Specification Value:
Confirmed at specification stage — contact IWM, Specification Notes:
Floor loading should be checked with a structural engineer before installation — particularly relevant for mezzanine or older industrial unit floors.
- Specification Name:
Power Requirement, Specification Value:
Confirmed at specification stage — contact IWM, Specification Notes:
A line of this scale is likely to require a three-phase supply; exact voltage and amperage should be confirmed with IWM before site preparation begins.
- Specification Name:
Pneumatic Requirement, Specification Value:
Confirmed at specification stage — contact IWM, Specification Notes:
Pneumatic lifting and clamping are integrated throughout the line; compressor specification should be confirmed with IWM to ensure reliable operation at your production rate.
- Specification Name:
Manufacturer, Specification Value:
Soukup s.r.o., Czech Republic
A continuous-production assembly line for timber frame panel manufacturers moving beyond single-table setups. Handles walls, roofs, ceilings, and opening frames — up to 12 m — within the same shift, with powered panel movement between stations.
- Chosen By List:
- List Item:
Window and door manufacturers who regularly take on arched or shaped frames but currently handle them as a slow, disruptive one-off process
- List Item:
Joinery workshops already running a Soukup Crafter or Wizard who need a dedicated downstream station to complete arch components accurately without tying up their main machining centre
- List Item:
Manufacturers who also produce door infill panels and want a single machine capable of handling both shaped frames and flat panel work
- This Product List:
- List Item:
You manufacture arched or shaped windows and doors regularly enough that handling them as a manual one-off is costing you time and consistency
- List Item:
You are already running a Soukup Crafter or Wizard for straight window production and need a dedicated station to complete the arch workflow without pulling your main machine off standard work
- List Item:
You need to machine glazing beads from board material on both faces as part of your arch production process
- List Item:
You produce door infill panels alongside window arches and want a single machine capable of handling both with repeatable positioning
- Alternate List:
- List Item:
Your primary need is straight window and door machining with no regular requirement for arched work — the Soukup Crafter or Soukup Wizard 3S or 4L would be the more appropriate starting point
- List Item:
You need single-end tenoning as your main production bottleneck rather than arch profiling — the Soukup Temac Automatic Single End Tenoning Machine addresses that more directly
- List Item:
You are considering the Arcus as a standalone purchase without an upstream cutting and angling machine — the Arcus depends on segments being accurately prepared first, so discuss the full line configuration with IWM before specifying
- List Item:
Your arch volumes are very low and occasional — it is worth discussing with IWM whether the Arcus is justified against your projected output, or whether an alternative approach suits your current scale
- Key Specifications:
- Specification Name:
Application, Specification Value:
Arched & shaped window/door components, glazing beads, door infill panels
- Specification Name:
Machining Passes, Specification Value:
Inside and outside profile in single setup, Specification Notes:
Profiling both faces in one setup reduces handling and keeps segment geometry consistent before pressing.
- Specification Name:
Compatible Upstream Machines, Specification Value:
Soukup Crafter, Soukup Wizard series, Specification Notes:
Segments must be accurately cut to length and end-angled on a compatible machine before presenting to the Arcus — confirm your existing or planned upstream machine with IWM.
- Specification Name:
Panel Machining, Specification Value:
Supported via supplementary table with two zero reference points, Specification Notes:
The supporting table and zero-reference positioning system for door infill panel work should be confirmed as included or optional at point of enquiry.
- Full Specifications:
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Specification Name:
Machine Type, Specification Value:
CNC Machining Centre
- Specification Name:
Primary Application, Specification Value:
Arched and shaped window & door arch component profiling
- Specification Name:
Secondary Application, Specification Value:
Glazing bead machining from board material (both sides)
- Specification Name:
Tertiary Application, Specification Value:
Door infill panel machining (with supporting table), Specification Notes:
Two zero reference points provide repeatable panel positioning — useful where batches of infill panels are a regular requirement.
- Specification Name:
Profiling, Specification Value:
Inside and outside profile of arch segments
- Specification Name:
Integration, Specification Value:
Designed for use in combination with Soukup Crafter or Wizard
- Specification Name:
Dimensions, Specification Value:
Confirm with IWM, Specification Notes:
Footprint and installation clearance requirements should be confirmed before committing floor space — contact IWM for the current datasheet.
- Specification Name:
Weight, Specification Value:
Confirm with IWM, Specification Notes:
Check floor loading capacity in your workshop before installation — IWM can provide the figure on request.
- Specification Name:
Power Requirement, Specification Value:
Confirm with IWM, Specification Notes:
Electrical supply requirements should be verified with your installer before ordering — IWM can confirm phase and amperage on request.
- Specification Name:
Spindle Configuration, Specification Value:
Confirm with IWM
- Specification Name:
Control System, Specification Value:
Confirm with IWM
- Specification Name:
Noise Level, Specification Value:
Confirm with IWM, Specification Notes:
If measured noise output exceeds 80 dB(A), acoustic treatment or hearing protection will be required under UK COSHH and noise at work regulations.
- Specification Name:
Extraction Connection, Specification Value:
Confirm with IWM, Specification Notes:
Extraction diameter and minimum airflow should be matched to your dust extraction system before installation — confirm with IWM at point of enquiry.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=QJndBoOX--I
A dedicated CNC station for profiling arched and shaped window and door components, so your main machining centre stays on standard production. Designed to work in combination with the Soukup Crafter or Wizard, the Arcus completes the arch workflow — inside and outside profile in a single setup — without pulling skilled operators away from straight-frame work.
- Chosen By List:
- List Item:
Window and joinery manufacturers looking to bring order to the space between machining and finishing
- List Item:
Workshops handling timber frames at multiple stages — drying, impregnation, glazing, and assembly — who need dedicated storage for each
- List Item:
Businesses where floor space is tight and stackable, purpose-built trolleys make a practical difference to daily operations
- This Product List:
- List Item:
Your workshop produces windows or frames and components currently sit in undefined staging areas between operations
- List Item:
You need a dedicated, consistent way to move frames through impregnation, drying, assembly, and glazing without improvising with general-purpose trolleys
- List Item:
Floor space is limited and you need equipment that stacks or nests when not in use
- List Item:
You want assembly, gasket fitting, and transport equipment that is designed to work together as a coordinated system rather than sourced piecemeal
- Alternate List:
- List Item:
Your primary need is surface coating or finishing — the IWM Wood Finishing Spray Booth With Extractor is likely the more relevant starting point
- List Item:
Your workshop handles bulk timber treatment rather than assembled frames — the IWM Impregnation & Basic Coating Bath addresses that earlier stage of the process
- List Item:
You are looking for heavy-duty industrial racking or pallet-based logistics rather than workshop-scale joinery trolleys — talk to us and we can advise on whether this range is the right fit
- Key Specifications:
- Specification Name:
Radial Arm Reach, Specification Value:
Up to 1.2 m, Specification Notes:
The extendable arms on the assembly table accommodate both small and large sashes without needing a separate fixture for each size.
- Specification Name:
Gasket Stand Capacity, Specification Value:
2 or 4 coils (G2 / G4)
- Specification Name:
Trolley Stacking, Specification Value:
Yes — TR10 stackable when empty, Specification Notes:
Empty TR10 trolleys stack directly on top of one another, which matters when floor space is shared with active production.
- Specification Name:
TR30 Orientation, Specification Value:
Horizontal storage, Specification Notes:
Horizontal racking suits components that must lie flat — particularly parts drying after impregnation or staged prior to gluing.
- Full Specifications:
- Specification Name:
Assembly Table — Height Adjustment, Specification Value:
Yes, Specification Notes:
Allows the working height to be set per operator or per task, reducing fatigue during gasket, hardware, or glazing application.
- Specification Name:
Assembly Table — Radial Arm Extension, Specification Value:
Up to 1.2 m
- Specification Name:
Assembly Table — Tool Shelf, Specification Value:
Yes
- Specification Name:
Stand Gasket — Compatible Models, Specification Value:
G2 (2-coil) and G4 (4-coil)
- Specification Name:
Stand Gasket — Storage Shelf, Specification Value:
Yes
- Specification Name:
TR10 — Primary Use, Specification Value:
Storage and transport of assembled frames or finished windows
- Specification Name:
TR10 — Loading Area, Specification Value:
800 × 1,600 mm
- Specification Name:
TR10 — Height, Specification Value:
1,600 mm
- Specification Name:
TR10 — Stackable When Empty, Specification Value:
Yes
- Specification Name:
TR20 — Primary Use, Specification Value:
Dedicated sections for raw timber ready for processing or complete window frames, Specification Notes:
The sectioned design keeps raw and finished stock separated, which is useful in a shared production and finishing area.
- Specification Name:
TR20 — Loading Area, Specification Value:
800 × 1,200 mm
- Specification Name:
TR20 — Height, Specification Value:
1,200 mm
- Specification Name:
TR30 — Primary Use, Specification Value:
Horizontal storage of machined parts, components drying after impregnation, sanding parts, or pre-gluing staging
- Specification Name:
TR30 — Loading Area, Specification Value:
800 × 1,600 mm
- Specification Name:
TR30 — Height, Specification Value:
1,800 mm
- Specification Name:
Dimensions — Assembly Table, Specification Value:
Contact IWM for current specification
- Specification Name:
Weight — All Items, Specification Value:
Contact IWM for current specification
- Specification Name:
Load Capacity — Trolleys, Specification Value:
Contact IWM for current specification
- Specification Name:
Material / Finish, Specification Value:
Contact IWM for current specification
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
Purpose-built assembly tables and transport trolleys that give window and frame workshops a logical, repeatable flow between machining, impregnation, and finishing — without improvising with general-purpose equipment.
- Chosen By List:
- List Item:
Joinery shops producing timber windows who need a single, organised station for hardware fitting and bead cutting
- List Item:
Workshops looking to reduce measuring errors when cutting glazing beads to length
- List Item:
Businesses where ergonomics matter — the tilting surface reduces operator fatigue during repetitive hardware fitting tasks
- This Product List:
- List Item:
You are fitting hardware and cutting glazing beads as a regular, repeated part of your window production and want both operations at one station
- List Item:
Measurement accuracy when cutting beads is a current problem — the integrated slide-and-stop system removes a manual transfer step
- List Item:
Your operators are fitting hardware for long periods and would benefit from a tiltable surface to reduce fatigue
- List Item:
You want built-in storage to keep hardware and fittings organised at the point of use rather than on a separate bench
- Alternate List:
- List Item:
Your primary need is pressing and bonding window frames under load — the <a href="index.php?option=com_content&view=article&id=57&catid=39">Soukup FP</a> Window & Door Press is the more appropriate machine for that operation
- List Item:
You need a combined mounting and glazing station with a larger or differently configured work area — the <a href="index.php?option=com_content&view=article&id=58&catid=21">Soukup Mounting & Glazing Stand GW 2500</a> may be a closer fit and is worth comparing directly
- List Item:
Your workflow requires segment-by-segment pressing rather than full-frame assembly — the <a href="index.php?option=com_content&view=article&id=59&catid=21">Soukup Segment Press Machine</a> handles that differently and should be discussed with us
- List Item:
You do not regularly cut glazing beads and have no need for the mitre saw element — a simpler assembly stand may be more cost-effective for your situation
- Key Specifications:
- Specification Name:
Bead Cutting, Specification Value:
Precision mitre saw with dust extraction, Specification Notes:
Integrated dust extraction keeps the work surface clean, which matters when fitting hardware directly on the same station.
- Specification Name:
Clamping, Specification Value:
Pneumatic perimeter clamps, Specification Notes:
Pneumatic clamping holds the window securely around its perimeter, freeing both hands for hardware fitting.
- Specification Name:
Measurement System, Specification Value:
Integral slide — outside frame and inner light measurement, Specification Notes:
The slide transfers the inner light measurement directly to a moveable stop on the mitre saw, reducing the chance of transcription errors between measuring and cutting.
- Specification Name:
Working Surface, Specification Value:
Tiltable table top, Specification Notes:
Tilting the surface towards the operator makes screwdriver access to fittings more comfortable, particularly during long production runs.
- Full Specifications:
- Specification Name:
Bead Cutting Tool, Specification Value:
Hand-operated mitre saw with dust extraction and collection
- Specification Name:
Clamping System, Specification Value:
Pneumatic scissors / perimeter clamps
- Specification Name:
Measurement — Outside Frame, Specification Value:
Integral slide, left-hand side of table
- Specification Name:
Measurement — Inner Light, Specification Value:
Integral slide with transferable stop, right-hand side of table, Specification Notes:
The stop transfers directly to the mitre saw, so the bead is cut to the measured dimension without a separate marking step.
- Specification Name:
Working Surface, Specification Value:
Tiltable
- Specification Name:
Storage, Specification Value:
Built-in containers for hardware and fittings
- Specification Name:
Dimensions, Specification Value:
Contact IWM for confirmed footprint, Specification Notes:
Allow additional clearance on all sides for window loading, operator movement, and extraction hose routing — speak to us and we will confirm the exact figures from Soukup before you plan your floor layout.
- Specification Name:
Weight, Specification Value:
Contact IWM for confirmed figure, Specification Notes:
Confirm with us before installation so your floor loading can be checked if required.
- Specification Name:
Air Supply Required, Specification Value:
Compressed air supply required — contact IWM for pressure and flow rate, Specification Notes:
The pneumatic clamping and scissors require a clean, dry compressed air supply; confirm the exact requirement with us before specifying your compressor or ring main.
- Specification Name:
Electrical Supply, Specification Value:
Electrical connection required — contact IWM for supply details, Specification Notes:
Confirm voltage, phase, and amperage with us before planning your workshop supply.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=nSfECL48g94
A dedicated station for fitting whole-frame window hardware and cutting glazing beads to length — keeping both operations in one organised, ergonomic workspace. Suits joinery shops where accuracy, repeatability, and operator comfort during hardware fitting all matter.
- Chosen By List:
- List Item:
Joinery workshops producing a mix of casement and sliding sash windows who need one machine to handle both without retooling between product types
- List Item:
Manufacturers working with traditional box sash construction who need accurate profiling of meeting rails, horn milling, and cord or balance spring grooves
- List Item:
Businesses where small sash stability during milling has been a recurring quality issue and who need a more consistent CNC solution
- This Product List:
- List Item:
Your workshop produces both casement and sliding sash windows and you want a single CNC centre to handle the core machining operations across both product types
- List Item:
Traditional timber box sash window production is a significant part of your work and you need accurate, repeatable profiling of meeting rails, horns, and balance spring or cord grooves
- List Item:
You've experienced splitting or instability problems when machining smaller sashes and need a machine whose design specifically addresses that issue
- List Item:
You need to produce stormproof, flush, and high-performance casement configurations from the same machine without significant reconfiguration
- Alternate List:
- List Item:
Your production is primarily casement with little or no sliding sash work — the Soukup Wizard 3S or Wizard 4L may be a better fit for a casement-focused line
- List Item:
You need a higher-volume, more automated throughput for casement production — the Soukup Versa CNC Window Machine may suit a larger production environment
- List Item:
Your requirement is single-end tenoning rather than a full machining centre — the Soukup Temac Automatic Single End Tenoning Machine is a more straightforward and lower-cost option
- List Item:
You are at an earlier stage of CNC adoption and need a simpler entry point — discuss the Soukup Wizard Tenon CNC Window Machine with us as a possible alternative
- Key Specifications:
- Specification Name:
Window Types Covered, Specification Value:
Casement & Sliding Sash (timber only), Specification Notes:
The machine handles both window families in timber, reducing the need for separate dedicated equipment for casement and sash production lines.
- Specification Name:
Component Length Range, Specification Value:
220–2,900 mm (between tenons), Specification Notes:
The 220 mm minimum is the key figure for workshops producing smaller or cottage-style sashes — confirm your shortest component against this before specifying.
- Specification Name:
Daily Output (1 operator), Specification Value:
8–12 complete sliding sash windows, 15–20 casements, or 30–40 single sashes, Specification Notes:
Figures are for a single-operator shift — actual output will vary with timber species, profile complexity, and operator experience.
- Specification Name:
Anti-Splitting Design, Specification Value:
Double-cycle tenoning — no anti-splitting spindle jump required, Specification Notes:
Cross wood is milled out during the tenoning cycle rather than relying on a spindle jump at the corner, which improves results and consistency when machining smaller sashes.
- Full Specifications:
- Specification Name:
Manufacturer, Specification Value:
Soukup
- Specification Name:
Machine Type, Specification Value:
CNC Window Machining Centre
- Specification Name:
Material, Specification Value:
Timber only
- Specification Name:
Casement — Frame Operations, Specification Value:
Tenoning and profiling of frames; tenoning and profiling of casements with shortened rail tenon for stormproofing; full machining of components without stormproofing (flush, stormproof, high performance)
- Specification Name:
Casement — Glazing Operations, Specification Value:
Recovery of glazing beads and sticking bars from frame rebate
- Specification Name:
Sliding Sash — Sash Box Operations, Specification Value:
Open tenons and slots; horn milling in different moulds; meeting rail slot adaptation to parting bead; traditional bevelled meeting rail profiling; outside profiling and grooving for cord, gasket, or balance springs, Specification Notes:
Mortising of sash stiles is carried out off-line — confirm off-line mortising provision before specifying this machine.
- Specification Name:
Sliding Sash — Box Frame Operations, Specification Value:
Tenoning and profiling of box parts for balance springs; cill notching for interior lining bead; divided cill profiling; slot trenching in cill and head for pulley stiles; cutting of moulded pulley stiles, lining beads, and cill extension, Specification Notes:
Pulley stiles, lining beads, head and cill extensions are moulded off-line — these operations can be carried out on the Soukup Versa Max; confirm your off-line moulding provision is in place before specifying.
- Specification Name:
Anti-Splitting System, Specification Value:
Double-cycle tenoning; cross wood milled out during tenoning cycle — no corner spindle jump required, Specification Notes:
This approach leaves only longitudinal wood for outside milling, reducing tear-off risk and improving consistency on small sashes where stability is typically the limiting factor.
- Specification Name:
Tooling Configuration, Specification Value:
Electronically controlled cut-off saw; CNC tenoning spindle; CNC profiling spindle; horizontal milling unit (horn milling and cill trenching), Specification Notes:
Tool stacks on the tenoning and profiling spindles adjust automatically to the programmed height and depth — discuss specific profile and tooling requirements with IWM before ordering.
- Specification Name:
CNC Control System, Specification Value:
Beckhoff industrial PC with 12" touch screen panel; Soukup WinCreator software supplied as standard, Specification Notes:
The system is also compatible with Klaes and Joinerysoft, so workshops already using either package can integrate without switching software.
- Specification Name:
Min/Max Component Length, Specification Value:
220 mm min / 2,900 mm max (measured between tenons), Specification Notes:
The 220 mm minimum is the practical limit for smaller sashes — workshops regularly producing cottage or heritage glazing bars should confirm their shortest components against this figure.
- Specification Name:
Daily Output (1 operator), Specification Value:
8–12 complete sliding sash windows; 15–20 casements; 30–40 single sashes, Specification Notes:
Output figures assume a competent single operator on a standard shift; profile complexity and timber preparation will affect actual throughput.
- Specification Name:
Dimensions (Floorspace), Specification Value:
2,000 mm × 2,000 mm, Specification Notes:
Allow additional clearance beyond the machine footprint on all feed sides and for extraction ducting — confirm usable floor area with IWM before ordering.
- Specification Name:
Weight, Specification Value:
3,000 kg, Specification Notes:
At 3,000 kg, floor loading should be assessed before installation, particularly in older workshop buildings or on suspended floors.
- Specification Name:
Power Requirement, Specification Value:
3-phase, 415 V, 50 Hz, Specification Notes:
Confirm that a suitable three-phase 415 V supply with adequate amperage capacity is available at your site before ordering.
- Specification Name:
Noise Level, Specification Value:
90 dB(A), Specification Notes:
90 dB(A) is above the HSE upper exposure action value of 85 dB(A) — acoustic treatment and mandatory hearing protection for operators will be required under the Control of Noise at Work Regulations 2005.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=Vrcan-YdviI
- Video Link:
https://www.youtube.com/watch?v=wkBG0_auKpk
- Video Link:
https://www.youtube.com/watch?v=_Q-0An2HVYs
- Video Link:
https://www.youtube.com/watch?v=dwX6od9cPa4
- Related Case Studies:
A single CNC centre that handles the core machining operations for both casement and traditional sliding sash windows in timber — without switching between dedicated machines. Designed specifically for British window production, including the horn milling, meeting rail profiling, and grooving work that box sash construction demands.
- Chosen By List:
- List Item:
Timber frame fabricators who need to process long structural sections to a cutting list without manual measuring at the saw
- List Item:
Joinery and construction workshops stepping up from manual crosscutting to automate repetitive length cutting across high daily volumes
- List Item:
Off-site construction operations where cutting tolerance and throughput consistency directly affect downstream assembly accuracy
- This Product List:
- List Item:
Your operation runs structured cutting lists and you need the saw to measure and position material automatically rather than relying on operators to do so
- List Item:
You are cutting structural timber, house components, or long joinery sections up to 6,000 mm (or longer with extended bed options) at consistent daily volumes
- List Item:
All your crosscuts are square at 90° — you do not need the machine to cut compound or angled sections
- List Item:
You want automated loading via servo-driven feed but are comfortable with a static unloading table rather than a fully automated outfeed system
- Alternate List:
- List Item:
You need angled or compound crosscuts as well as square cuts — the Soukup Crossline 650 Automatic Angle Cross Cut Saw handles cuts up to ±70° and is the more appropriate specification for that workflow
- List Item:
Your operation is a smaller joinery or fabrication shop with lower daily volume where a manual or semi-automatic crosscut saw would be a more proportionate fit — talk to us about right-sizing before committing to this level of automation
- List Item:
You are specifying within a wider timber frame panel production line — the Soukup Framer Profi or Framer Modular Assembly Table may need to be considered alongside this machine to ensure the full workflow is compatible
- List Item:
Your building or floor run cannot accommodate 12 metres or more of installed length including feed and clearance — confirm your available space with us before proceeding
- Key Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
500 mm
- Specification Name:
Max. Material Length, Specification Value:
6,000 mm (options: 9,000 mm / 12,000 mm), Specification Notes:
The extended length options will significantly increase the machine footprint beyond the standard 11,960 mm — confirm available floor run before specifying.
- Specification Name:
Max. Cutting Height, Specification Value:
120 mm, Specification Notes:
This is the maximum single-pass depth; confirm your largest section sizes fall within this before proceeding.
- Specification Name:
Tolerance, Specification Value:
±0.5 mm/m, Specification Notes:
For timber frame and off-site construction, this level of dimensional consistency supports accurate panel and structural assembly without remedial trimming.
- Full Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
500 mm
- Specification Name:
Cut Angle, Specification Value:
90°, Specification Notes:
Square crosscutting only — if angled cuts are required, consider the Soukup Crossline 650 Automatic Angle Cross Cut Saw instead.
- Specification Name:
Material Length, Specification Value:
6,000 mm (9,000 mm / 12,000 mm available), Specification Notes:
The extended length options will significantly increase the machine footprint beyond the standard 11,960 mm — confirm available floor run before specifying.
- Specification Name:
Max. Cutting Height, Specification Value:
120 mm, Specification Notes:
Confirm your largest section sizes fall within this before proceeding.
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min
- Specification Name:
Saw Blade Motor, Specification Value:
7.5 kW (10 HP), Specification Notes:
Three-phase motor — confirm three-phase supply is available at your premises before ordering.
- Specification Name:
Tolerance, Specification Value:
±0.5 mm/m
- Specification Name:
Noise Level, Specification Value:
60 dB, Specification Notes:
60 dB is broadly comparable to a normal conversation; sustained daily operation still warrants appropriate hearing protection in line with your noise risk assessment.
- Specification Name:
Dust Extraction, Specification Value:
100 mm + 120 mm ports, Specification Notes:
Two separate extraction connections are required — confirm your extraction system has sufficient capacity and the correct spigot sizes for both ports.
- Specification Name:
Touch Screen Control, Specification Value:
10" touch screen
- Specification Name:
Machine Length, Specification Value:
11,960 mm, Specification Notes:
This is the machine body only — additional clearance for infeed, outfeed, and operator access will be needed. Verify your building length against the full installed run.
- Specification Name:
Machine Width, Specification Value:
1,210 mm
- Specification Name:
Machine Height, Specification Value:
1,590 mm
- Specification Name:
Machine Weight, Specification Value:
1,750 kg, Specification Notes:
At 1,750 kg, floor loading should be checked before installation — particularly relevant for mezzanine levels or older workshop floors.
- Specification Name:
Electrical Supply, Specification Value:
3 Phase, 400 V, 50 Hz, Neutral & Earth, 32 A, Specification Notes:
Confirm three-phase 400 V supply with Neutral and Earth is available and that your distribution board can support a 32 A draw before ordering.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=iHnxcoEgNiw
- Video Link:
https://www.youtube.com/watch?v=AEGnRVcdsRA
- Related Case Studies:
A servo-fed automatic crosscut saw for workshops running structured cutting lists against long structural timber and joinery sections. Square cuts to 0.5 mm/m tolerance, with bed options up to 12,000 mm for the longest frame components.
- Chosen By List:
- List Item:
Timber frame manufacturers who need to process cutting lists accurately and repeatedly without hand-measuring every piece
- List Item:
Structural timber workshops stepping up from manual or semi-automatic crosscutting to reduce bottlenecks in component preparation
- List Item:
Off-site construction businesses where dimensional tolerance across long lengths directly affects assembly accuracy on site
- This Product List:
- List Item:
You are producing timber frame components from cutting lists and need automatic length measurement and servo-driven feed to maintain consistent accuracy across high volumes
- List Item:
Your crosscutting is all at 90° and you do not need angled cuts — this machine is optimised for square crosscutting and is simpler to specify and operate as a result
- List Item:
You are working with structural softwood or engineered timber up to 120 mm in section height and up to 6 m in standard length (or up to 12 m with extended configuration)
- List Item:
You want a machine that an operator can load a cutting list into and run with minimal intervention, reducing labour cost per component
- Alternate List:
- List Item:
You need to cut compound or angled crosscuts — the Soukup Crossline 650 Automatic Angle Cross Cut Saw handles angular cutting up to ±70° and may be more appropriate for rafter or roof component work
- List Item:
Your volume does not justify a fully automated feed system — the Soukup Crossline 500 (non-M) may offer the same cutting capacity at lower capital cost if manual feeding is acceptable
- List Item:
Your workshop cannot accommodate nearly 12 m of floor length even in its standard configuration — discuss space constraints with IWM before proceeding
- List Item:
You are primarily cutting panels or working with SIP construction — the Soukup Framer Profi or Framer Modular system may be a better fit for that workflow
- Key Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
500 mm
- Specification Name:
Max. Cutting Height, Specification Value:
120 mm, Specification Notes:
This is the maximum depth of cut at 90°; confirm that your largest section timber falls within this limit before specifying.
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min, Specification Notes:
Variable feed speed allows the machine to be dialled to material size and cut frequency, which affects both cycle time and finish quality.
- Specification Name:
Length Tolerance, Specification Value:
0.5 mm/m, Specification Notes:
On a 6 m length this equates to a maximum positional error of 3 mm — relevant if your downstream assembly or joinery relies on close component fit.
- Full Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
500 mm
- Specification Name:
Cut Angle, Specification Value:
90°, Specification Notes:
This model cuts square only; if angled crosscuts are required, consider the Soukup Crossline 650 Automatic Angle Cross Cut Saw.
- Specification Name:
Material Length (Standard), Specification Value:
6,000 mm
- Specification Name:
Material Length (Extended Options), Specification Value:
9,000 mm / 12,000 mm, Specification Notes:
Extended feed track configurations are available; confirm with IWM which option suits your standard stock lengths and workshop footprint.
- Specification Name:
Max. Cutting Height, Specification Value:
120 mm, Specification Notes:
Confirm that your largest section timber falls within this limit before specifying.
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min
- Specification Name:
Saw Blade Motor, Specification Value:
7.5 kW (10 HP), Specification Notes:
This motor requires a three-phase supply; confirm your site's three-phase capacity with your electrician before ordering.
- Specification Name:
Length Tolerance, Specification Value:
0.5 mm/m
- Specification Name:
Dust Extraction Spigots, Specification Value:
100 mm + 120 mm, Specification Notes:
Two extraction points require connection to a suitably sized extraction unit; confirm your existing extraction capacity covers both outlets simultaneously.
- Specification Name:
Control Interface, Specification Value:
10" Touch Screen
- Specification Name:
Automatic Material Measuring, Specification Value:
Yes, Specification Notes:
The machine measures incoming material automatically, removing the need for manual marking-out and reducing operator error on repetitive cutting lists.
- Specification Name:
Servo Driven Electronic Loading, Specification Value:
Yes, Specification Notes:
Servo-driven feed gives precise, repeatable positioning of each piece — this is what delivers the 0.5 mm/m tolerance across the full length.
- Specification Name:
Manual Cutting List Input, Specification Value:
Yes
- Specification Name:
Static Unloading Table, Specification Value:
Yes
- Specification Name:
Grooving Module, Specification Value:
Optional extra, Specification Notes:
The grooving module is available as an add-on; it is used during prefabrication to mark stud positions precisely within panel construction. Confirm requirement and pricing with IWM at enquiry stage.
- Specification Name:
Machine Length, Specification Value:
11,960 mm, Specification Notes:
At nearly 12 m in its standard configuration, shop floor length should be measured carefully before enquiring — extended material options will require additional clearance at the infeed end.
- Specification Name:
Machine Width, Specification Value:
1,210 mm, Specification Notes:
Allow additional clearance either side for operator access and safe timber handling.
- Specification Name:
Machine Height, Specification Value:
1,590 mm
- Specification Name:
Machine Weight, Specification Value:
Confirm with IWM, Specification Notes:
Weight data is not published in available documentation; ask IWM to confirm before checking floor loading, particularly on mezzanine or older industrial slabs.
- Specification Name:
Electrical Supply, Specification Value:
Three-phase (full spec: confirm with IWM), Specification Notes:
The 7.5 kW saw blade motor requires a three-phase supply; full voltage and amperage data should be confirmed with IWM so your electrician can verify site readiness before ordering.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=iHnxcoEgNiw
- Video Link:
https://www.youtube.com/watch?v=AEGnRVcdsRA
A servo-driven automatic crosscut saw for workshops that need to process cutting lists accurately and repeatedly at volume. Built for square crosscutting of structural and engineered timber up to 120 mm section height.
- Chosen By List:
- List Item:
Timber truss manufacturers cutting large batches of components to tight angular tolerances
- List Item:
Offsite timber frame fabricators who need to process pre-cut lists from BTL design software without manual re-entry
- List Item:
Joinery and structural timber operations that have outgrown manual or semi-automatic crosscutting and need consistent accuracy across long production runs
- This Product List:
- List Item:
Your production involves regular angled cuts across a wide range — particularly compound angles for trusses, rafters, or structural frame components
- List Item:
You are running BTL-format cut lists from design software and want to eliminate manual data re-entry at the saw
- List Item:
You need a machine that can operate as both a standalone manual saw and a fully automated cell, depending on the job in hand
- List Item:
You are building out an offsite fabrication line and need a cross cut station that can be integrated with conveyors or manipulators
- Alternate List:
- List Item:
Your cutting is predominantly square cross cuts with only occasional angled work — the Soukup Crossline 500 may be a more proportionate specification at lower cost
- List Item:
Your throughput is lower and full CNC automation is not justified — a semi-automatic or manually indexed saw may suit your operation better and reduce capital outlay
- List Item:
Your primary requirement is panel or wall frame assembly rather than individual member cutting — the Soukup Framer Profi or Framer Modular Assembly Table may be the more relevant starting point
- List Item:
Timber storage and handling between processes is your current bottleneck — consider whether the Timber Frame Offsite Track Storage or Vertical Transporter should be specified alongside or before the saw
- Key Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
ø650 mm
- Specification Name:
Angle Range, Specification Value:
20°–160° (turntable rotation), equivalent to ±70° from square, Specification Notes:
This covers the full range of compound angles typically encountered in truss and rafter production without repositioning the workpiece.
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min (servo-driven)
- Specification Name:
Cut Tolerance, Specification Value:
±0.5 mm per linear metre, Specification Notes:
For truss and frame work this is a meaningful level of consistency — cumulative error across a full roof structure is kept well within structural tolerances.
- Full Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
ø650 mm
- Specification Name:
Saw Blade Speed, Specification Value:
2800 RPM
- Specification Name:
Saw Motor Power, Specification Value:
7.5 kW (10 HP), Specification Notes:
Three-phase supply — confirm a 3-phase, 400 V, 32 A circuit is available at the installation point before ordering.
- Specification Name:
Turntable Rotation, Specification Value:
20°–160°
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min
- Specification Name:
Cut Tolerance, Specification Value:
±0.5 mm/bm, Specification Notes:
For truss and frame work this is a meaningful level of consistency — cumulative error across a full roof structure is kept well within structural tolerances.
- Specification Name:
Material Feed, Specification Value:
Servo-driven electronic pusher with automatic head detection, Specification Notes:
Automatic head detection removes the need for a manual datum step, keeping cycle times short on long cut lists.
- Specification Name:
Clamping, Specification Value:
2 upper + 2 side pneumatic clamps, individual pressure regulation, Specification Notes:
Individual pressure control allows the machine to handle different timber section sizes without reconfiguring the whole clamping setup.
- Specification Name:
Saw Blade Lift, Specification Value:
Automatic rise to cut, variable lifting speed regulation
- Specification Name:
Control System, Specification Value:
Beckhoff industrial PC with 12" touch screen
- Specification Name:
Operating Modes, Specification Value:
Manual or fully automatic (BTL file input), Specification Notes:
BTL compatibility means cut lists generated in most structural timber design packages can be fed directly to the machine without re-keying data.
- Specification Name:
Software Integration, Specification Value:
WinCreator or third-party BTL format software, Specification Notes:
Confirm compatibility with your existing design or production software with IWM before specifying.
- Specification Name:
Dust Extraction Outlets, Specification Value:
ø120 mm + ø100 mm (both simultaneous), Specification Notes:
Both outlets are intended for simultaneous use — confirm your extraction system can accommodate both connections, or discuss a suitable collector with IWM.
- Specification Name:
Soundproof Design, Specification Value:
Yes, Specification Notes:
The acoustic enclosure brings the measured noise level at the operator position to 60 dB — roughly equivalent to a normal office environment, and well below the level at which additional acoustic treatment would be required.
- Specification Name:
Maximum Workpiece Length, Specification Value:
6,000 mm, Specification Notes:
Allow adequate infeed and outfeed clearance beyond the machine footprint for full-length material — discuss roller support requirements with IWM at specification stage.
- Specification Name:
Maximum Section Size, Specification Value:
350 mm × 230 mm
- Specification Name:
Machine Dimensions, Specification Value:
13,000 mm (L) × 1,250 mm (W) × 1,600 mm (H), Specification Notes:
The 13 m overall length includes the integrated feed and outfeed zones — measure the full bay length, not just the cutting head footprint, when assessing installation space.
- Specification Name:
Machine Weight, Specification Value:
2,000 kg, Specification Notes:
At 2,000 kg a floor loading assessment is advisable before installation — check your slab specification with a structural engineer if in doubt.
- Specification Name:
Electrical Supply, Specification Value:
3-phase, 400 V, 50 Hz, 32 A (N+E), Specification Notes:
A dedicated 32 A three-phase circuit with neutral and earth is required — confirm this is available, or budget for an electrical upgrade, before ordering.
- Specification Name:
Line Integration, Specification Value:
Compatible with conveyors and manipulators, Specification Notes:
Specific integration requirements will depend on your existing or planned line layout — discuss with IWM at specification stage.
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=0wFVausmqU8
A fully automatic CNC cross cut saw built for truss and timber frame production, handling angled cuts across the full ±70° range with servo-driven feed and direct BTL file input. If you are running structured cut lists and need consistent accuracy through a long production day, this is where manual and semi-automatic saws run out of road.
- Chosen By List:
- List Item:
Timber truss manufacturers needing consistent, repeatable cuts at volume with minimal manual intervention
- List Item:
Offsite timber frame fabricators who cut both structural members and wall panel components and want to consolidate operations onto one machine
- List Item:
Production facilities already running WinCreator or BTL-format software who want a saw that integrates into their existing data workflow
- This Product List:
- List Item:
You are producing both timber trusses and prefabricated wall panels and need angled cross-cutting and stud-position grooving from a single machine
- List Item:
Your operation runs BTL-format design software and you want cut lists to flow directly to the saw without manual re-entry
- List Item:
You need fully automatic CNC operation at production volume, not a manually operated or semi-automatic saw
- List Item:
You are planning or already running a production line with conveyors and manipulators and need a saw that can be integrated into that flow
- Alternate List:
- List Item:
You only need cross-cutting without grooving — the Soukup Crossline 650 (without the M module) is likely the more straightforward and cost-effective specification
- List Item:
Your timber sections are consistently smaller and a 650 mm blade is more than required — the Soukup Crossline 500 is worth discussing with us first
- List Item:
Your output volumes are lower or your operation is predominantly manual — a simpler cross-cut saw may be better matched to your throughput and budget
- List Item:
You need full multi-axis machining of timber frame components beyond cross-cutting and grooving — the Soukup Framer Profi may be more appropriate for your scope
- Key Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
650 mm
- Specification Name:
Turntable Range, Specification Value:
20°–160°, Specification Notes:
This range covers the full spread of compound angles commonly required in truss geometry without repositioning the workpiece.
- Specification Name:
Cut Tolerance, Specification Value:
±0.5 mm/bm
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min, Specification Notes:
Variable feed speed allows the operator to match throughput to timber section size and material condition rather than running at a fixed rate.
- Full Specifications:
- Specification Name:
Saw Blade Diameter, Specification Value:
650 mm
- Specification Name:
Saw Blade Speed, Specification Value:
2,800 RPM
- Specification Name:
Saw Blade Motor, Specification Value:
7.5 kW (10 HP), Specification Notes:
Three-phase supply will be required — confirm exact amperage draw and supply availability with IWM before ordering.
- Specification Name:
Turntable Rotation, Specification Value:
20°–160°, Specification Notes:
This range covers the full spread of compound angles commonly required in truss geometry without repositioning the workpiece.
- Specification Name:
Cut Tolerance, Specification Value:
±0.5 mm/bm
- Specification Name:
Feed Speed, Specification Value:
0–60 m/min (variable), Specification Notes:
Variable feed speed allows the operator to match throughput to timber section size and material condition rather than running at a fixed rate.
- Specification Name:
Saw Blade Lifting Speed, Specification Value:
Regulated (variable)
- Specification Name:
Control System, Specification Value:
Beckhoff industrial PC with 12" touch screen
- Specification Name:
Software Compatibility, Specification Value:
WinCreator or third-party BTL-format software, Specification Notes:
If your existing CAD/CAM or design package exports BTL files, the machine can receive cut lists directly — check your software's export capability before specifying.
- Specification Name:
Clamping, Specification Value:
Upper and side pneumatic clamps with individual pressure regulation, Specification Notes:
Individual pressure regulation on each clamp matters when you are running mixed section sizes without stopping to reconfigure.
- Specification Name:
Grooving Module, Specification Value:
Included (max groove width 60 mm, subject to tooling), Specification Notes:
The grooving module allows stud-position slots to be cut into wall panel material on the same machine, removing a separate operation.
- Specification Name:
Material Measuring, Specification Value:
Automatic
- Specification Name:
Operating Modes, Specification Value:
Manual or automatic (CNC)
- Specification Name:
Dust Extraction Outlets, Specification Value:
ø120 mm + ø100 mm, Specification Notes:
Two separate outlets with different spigot sizes — confirm your extraction system can accommodate both connections and the combined airflow demand before installation.
- Specification Name:
Sound Attenuation, Specification Value:
Soundproof enclosure design, Specification Notes:
The machine incorporates a soundproof enclosure — contact IWM for the confirmed dB rating if acoustic assessment is required for your site.
- Specification Name:
Machine Dimensions, Specification Value:
Contact IWM for confirmed dimensions, Specification Notes:
Allow additional clearance for infeed table, outfeed table, and operator access when planning floor space.
- Specification Name:
Machine Weight, Specification Value:
Contact IWM for confirmed weight, Specification Notes:
Verify floor loading capacity with your structural engineer prior to installation — contact IWM for the confirmed figure.
- Specification Name:
Electrical Supply, Specification Value:
Three-phase — contact IWM for confirmed voltage and amperage, Specification Notes:
Confirm phase, voltage, and amperage requirements with IWM before ordering to ensure your incoming supply is correctly specified.
- Specification Name:
Outfeed, Specification Value:
Automatic transfer from cutting zone to outfeed table
- Specification Name:
Line Integration, Specification Value:
Compatible with conveyors and manipulators
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=0wFVausmqU8
- Video Link:
https://www.youtube.com/watch?v=Cz8JoNktWD4
- Video Link:
https://www.youtube.com/watch?v=fnJ8iRklcR0
A fully automatic CNC cross-cut saw with integrated grooving module, built for timber truss manufacturers and offsite fabricators who need angled cross-cutting and stud-position trenching from a single machine. If your operation runs BTL-format design software and requires production-volume throughput without manual re-entry of cut data, this is the machine to discuss with us.
- Chosen By List:
- List Item:
Joinery workshops processing window and door sets who need a dedicated station for hardware drilling rather than tying up a full machining centre
- List Item:
Operations already running a Soukup Wizard that want to add a linked drilling stage and share component data across the line
- List Item:
Shops handling a mix of standard and complex components, where a fixed table for long or intricate pieces and moving tables for routine work gives genuine flexibility
- This Product List:
- List Item:
You need a dedicated drilling station for window and door hardware — keeping this work off your main machining centre and freeing it for profiling and tenoning
- List Item:
You are running or planning a Soukup Wizard line and want to add a linked drilling stage that shares the same component data without re-programming
- List Item:
Your production mix includes both long, complex components and routine pieces, and you need a machine that can handle both without reconfiguration
- List Item:
You want the option of barcode-driven automatic program loading to reduce operator setup time and error across varied batch work
- Alternate List:
- List Item:
You need profiling and tenoning as well as drilling in a single machine — the Soukup Wizard 3S or Wizard 4L would handle the full window or door component in one setup
- List Item:
Your primary requirement is tenoning rather than drilling — the Soukup Temac Automatic Single End Tenoning Machine is likely a better fit and a more cost-effective one
- List Item:
You need a fully integrated CNC window machining solution with a broader range of operations — the Soukup Crafter CNC Window Machining Centre is worth discussing with us instead
- List Item:
Head and front-face drilling make up the majority of your work and manual component turning between operations would create a bottleneck — talk to us about whether a different configuration better suits your workflow
- Key Specifications:
- Specification Name:
Axes, Specification Value:
3-axis, Specification Notes:
The 3-axis configuration handles drilling and milling from the top and back face in a single setup; front-face and head drilling require the operator to turn the component manually.
- Specification Name:
Tables, Specification Value:
Two moving tables + one fixed right-hand table, Specification Notes:
The fixed right-hand table is intended for longer components with more complex drilling requirements; routine components are clamped on the two moving tables alone.
- Specification Name:
Barcode Integration, Specification Value:
Optional, Specification Notes:
When the optional barcode device is fitted, the working program loads automatically on component recognition, reducing manual setup time and the risk of operator error between batches.
- Specification Name:
Software Compatibility, Specification Value:
WinCreator / compatible third-party software
- Full Specifications:
- Specification Name:
Machine Type, Specification Value:
Stand-alone drilling and milling work centre
- Specification Name:
Primary Operations, Specification Value:
Drilling and milling (hinges, olives, door lock cases, dowel drilling)
- Specification Name:
Axes, Specification Value:
3-axis, Specification Notes:
Front-face and head drilling require manual component turning between operations.
- Specification Name:
Tables, Specification Value:
Two moving tables + one fixed right-hand table
- Specification Name:
Program Setup, Specification Value:
Automatic via barcode device (optional) or manual via WinCreator / third-party software
- Specification Name:
Line Integration, Specification Value:
Can be linked to Soukup Wizard machine; shares component data across the line, Specification Notes:
Shared data between the Drillex and Wizard means component parameters only need to be entered once, reducing programming duplication.
- Specification Name:
Software, Specification Value:
WinCreator or compatible third-party software
- Specification Name:
Dimensions, Specification Value:
Contact IWM for current configuration data, Specification Notes:
Allow additional clearance around the machine for component infeed, outfeed, and operator access — discuss your available footprint with us before planning the installation.
- Specification Name:
Weight, Specification Value:
Contact IWM for current configuration data
- Specification Name:
Power Requirement, Specification Value:
Contact IWM for current configuration data
- Specification Name:
Spindle Power, Specification Value:
Contact IWM for current configuration data
- Specification Name:
Maximum Component Size, Specification Value:
Contact IWM for current configuration data
- Specification Name:
Minimum Component Size, Specification Value:
Contact IWM for current configuration data
- Specification Name:
Noise Level, Specification Value:
Contact IWM for current configuration data
- Specification Name:
Extraction Connection, Specification Value:
Contact IWM for current configuration data
- Product Gallery:
- Image:
- Image:
- Image:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=BKim6w75tPY
- Video Link:
https://www.youtube.com/watch?v=tTefbYge5Qw
A dedicated CNC drilling and milling station for window and door hardware, keeping repetitive drilling work off your main machining centre. Runs standalone or linked directly to a Soukup Wizard line.
- Chosen By List:
- List Item:
Small to medium joinery workshops that already run — or are specifying — a Falach briquetting machine and want dust extraction integrated into the same footprint
- List Item:
Workshops processing a mix of materials including softwood, hardwood, MDF, or chipboard who need a single extractor that handles all of them
- List Item:
Businesses looking to reduce loose dust accumulation around the briquetter without installing a full centralised extraction system
- This Product List:
- List Item:
You are already specifying or operating a Falach briquetting machine and want dust extraction integrated directly onto it rather than as a separate floor-standing unit
- List Item:
Your workshop is small to medium in size and a compact, machine-mounted extraction solution is more practical than a centralised system
- List Item:
You are processing a variety of materials — softwood, hardwood, MDF, or chipboard — and need one unit that handles all of them
- List Item:
You want self-cleaning filter maintenance via the built-in vibrating regeneration system rather than relying on manual filter cleaning
- Alternate List:
- List Item:
You do not have a Falach briquetting machine — the <a href="index.php?option=com_content&view=article&id=46&catid=18">Salvamac Mobile 1 to 4 Bagging Dust Extractors</a> are mobile, self-contained units that are not dependent on a specific briquetter and may better suit a standalone extraction requirement
- List Item:
You need extraction across multiple machines or workstations rather than a single briquetter-mounted point — a centralised or mobile system such as the Salvamac range is likely more appropriate
- List Item:
You need bagged waste collection at the extraction point rather than feeding directly into a briquetter — the <a href="index.php?option=com_content&view=article&id=46&catid=18">Salvamac Mobile</a> Bagging Dust Extractors are designed for exactly this workflow
- List Item:
Your volume has grown beyond small to medium scale — the DEX 96 is the largest unit in the Soukup DEX range; if your extraction demand has outgrown it, speak to IWM about whether a different extraction configuration is more appropriate for your setup
- Key Specifications:
- Specification Name:
Compatible Materials, Specification Value:
Softwood, hardwood, MDF, chipboard
- Specification Name:
Filter Type, Specification Value:
Cylindrical filter sleeves with vibrating regeneration system, Specification Notes:
The vibrating regeneration system dislodges accumulated dust from the filter sleeves automatically, helping maintain consistent suction without frequent manual cleaning.
- Specification Name:
Mounting, Specification Value:
Fits directly onto Falach briquetting machine hopper
- Specification Name:
Suction Fan, Specification Value:
Separately situated — selected to suit required application, Specification Notes:
The fan is specified separately based on your workshop's extraction demand; IWM can advise on the correct fan selection for your setup.
- Full Specifications:
- Specification Name:
Compatible Materials, Specification Value:
Softwood, hardwood, MDF, chipboard
- Specification Name:
Filter Type, Specification Value:
Cylindrical filter sleeves
- Specification Name:
Filter Support, Specification Value:
Frame with vibrating regeneration system, Specification Notes:
The vibrating regeneration system dislodges accumulated dust from the filter sleeves automatically, helping maintain consistent suction without frequent manual cleaning.
- Specification Name:
Filter Location, Specification Value:
Large expanding area above briquetting machine hopper
- Specification Name:
Suction Fan, Specification Value:
Separately situated — selected to suit required application, Specification Notes:
The fan is specified separately based on your workshop's extraction demand; IWM can advise on the correct fan selection for your setup.
- Specification Name:
Mounting / Integration, Specification Value:
Designed to fit on Falach briquetting machines
- Specification Name:
Suitable Workshop Size, Specification Value:
Small to medium joinery workshops
- Specification Name:
Compatible Briquetting Models, Specification Value:
Falach range — DEX 40, DEX 60, and DEX 96 correspond to different Falach machine sizes. Speak to IWM to confirm the correct DEX variant for your specific Falach model.
- Specification Name:
Dimensions, Specification Value:
Available on enquiry — contact IWM
- Specification Name:
Weight, Specification Value:
Available on enquiry — contact IWM
- Specification Name:
Power Requirement, Specification Value:
Available on enquiry — contact IWM
- Specification Name:
Noise Level, Specification Value:
Available on enquiry — contact IWM
- Product Gallery:
- Image:
- Image:
A briquetter-mounted industrial dust extractor that keeps loose dust out of your workshop without taking up additional floor space. Available in three model sizes to suit the capacity of your Falach briquetting machine.
- Chosen By List:
- List Item:
Joinery shops stepping up to four-side processing in a single pass to reduce handling time between operations
- List Item:
Timber merchants and moulding producers running medium-volume profiled sections who need repeatable finish quality
- List Item:
Workshops processing a mixed range of section sizes who want the flexibility of variable feed speed and independent spindle adjustment
- This Product List:
- List Item:
You need four-side planing and moulding in a single pass at medium production volumes and want a cost-effective entry into this class of machine
- List Item:
You want the flexibility to specify 4, 5, or 6 spindles to match the complexity of your most common profiles
- List Item:
Digital spindle readout and centralised controls are important for reducing changeover time and operator error in a busy production environment
- List Item:
You regularly process short or narrow sections and need positive feed control to handle them safely
- Alternate List:
- List Item:
You need heavier-duty, higher-volume throughput — the GN-5S23 or GN-6S23 may be more appropriate for sustained industrial production rates
- List Item:
Your maximum workpiece width exceeds what the GS series accommodates — the GL-645 handles up to 450 mm width and may better suit larger section sizes
- List Item:
Your profiling requirements are simpler and a dedicated moulder without full four-side planing is sufficient — the GH-623 or GL-630 Moulder may be a more cost-effective fit
- List Item:
You are processing at lower volumes or smaller sections where the Four-Sided Planer Model 180 PSE may be a better-matched specification — talk to us and we can advise
- Key Specifications:
- Specification Name:
Spindle Configuration, Specification Value:
4, 5, or 6 spindles (GS-423 / GS-523), Specification Notes:
The number of spindles determines how complex a profile you can complete in a single pass — more spindles reduce the need for secondary operations or re-runs.
- Specification Name:
Feed Speed, Specification Value:
Variable (contact IWM for range), Specification Notes:
Variable feed allows you to slow down for hardwoods or intricate profiles and increase throughput on straightforward sections — important for workshops processing mixed species.
- Specification Name:
Spindle Setup, Specification Value:
Digital readout, Specification Notes:
Digital readout on spindle positioning speeds up changeovers and reduces the risk of setup error when switching between section profiles.
- Specification Name:
Construction, Specification Value:
Ribbed cast iron frame
- Full Specifications:
- Specification Name:
Model Variants, Specification Value:
GS-423, GS-523
- Specification Name:
Spindle Configuration, Specification Value:
4, 5, or 6 spindles
- Specification Name:
Spindle Adjustment, Specification Value:
Vertical and horizontal, with digital readout
- Specification Name:
Thickness Spindle, Specification Value:
Adjustable independently of the feeder, Specification Notes:
Independent thickness adjustment means you can fine-tune the top face without disturbing your feed settings — useful when switching between slightly different stock sizes.
- Specification Name:
Feed System, Specification Value:
Variable speed, steel and rubber wheels under pneumatic pressure, Specification Notes:
Pneumatic pressure on the feed wheels maintains consistent grip across varying workpiece widths, which matters when feeding short or narrow sections.
- Specification Name:
Workpiece Support, Specification Value:
Side front pressure plate on left vertical spindle; powered roller after 4th spindle, Specification Notes:
The side pressure plate is specifically designed to support short or narrow workpieces that would otherwise be prone to movement or kickback at the infeed.
- Specification Name:
Working Table, Specification Value:
Chromed
- Specification Name:
Construction, Specification Value:
Cast iron
- Specification Name:
Air Pressure System, Specification Value:
Centralised regulation, Specification Notes:
A centralised air pressure system means a single point of adjustment for the pneumatic feed — check that your workshop has a suitable compressed air supply before installation.
- Specification Name:
Lubrication, Specification Value:
Centralised lubrication system
- Specification Name:
Control Layout, Specification Value:
All spindle control levers at front of machine
- Specification Name:
Safety Guarding, Specification Value:
Comprehensive safety guards fitted
- Specification Name:
Certification, Specification Value:
CE certified
- Specification Name:
Motor Power, Specification Value:
Contact IWM for configuration details, Specification Notes:
Four-side moulders of this class typically require a three-phase supply — confirm total connected load and phase requirement with IWM before ordering.
- Specification Name:
Working Width (max), Specification Value:
Contact IWM for details
- Specification Name:
Working Height (max), Specification Value:
Contact IWM for details
- Specification Name:
Minimum Workpiece Length, Specification Value:
Contact IWM for details
- Specification Name:
Spindle Speed, Specification Value:
Contact IWM for details
- Specification Name:
Feed Speed Range, Specification Value:
Variable — contact IWM for details
- Specification Name:
Machine Dimensions, Specification Value:
Contact IWM for details, Specification Notes:
Allow additional clearance at infeed and outfeed ends for workpiece length, plus access for the operator — four-side moulders typically require more floor space than the machine footprint alone.
- Specification Name:
Machine Weight, Specification Value:
Contact IWM for details, Specification Notes:
If weight exceeds 500 kg, floor loading capacity should be verified before installation.
- Specification Name:
Noise Level, Specification Value:
Contact IWM for details
- Product Gallery:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=UVGLQNLoPg0&t=7s
- Related Case Studies:
A solid entry into four-side processing for medium-scale joinery and timber production — plane and profile all four faces in a single pass, with the flexibility to specify 4, 5, or 6 spindles to match your most common profiles.
- Chosen By List:
- List Item:
Joinery shops producing timber windows and doors at volume who need repeatable, square assemblies without relying on operator skill alone
- List Item:
Workshops moving away from manual or band-cramp assembly and looking for a more consistent, efficient pressing process
- List Item:
Manufacturers working across a range of frame sizes who need a press bed large enough to accommodate their largest units
- This Product List:
- List Item:
Your workshop assembles timber windows and doors at a consistent volume and you need repeatable squareness and clamping pressure across every frame
- List Item:
You're producing frames up to 4000 × 2600 mm and need a pressing bed large enough to handle your full size range
- List Item:
You want a dedicated hydraulic press rather than adapting a general-purpose cramping or assembly system
- List Item:
You're replacing a manual or band-cramp process and need a more reliable, less operator-dependent assembly method
- Alternate List:
- List Item:
Your volumes are lower or your frame sizes are more variable — the Soukup Assembling Table KS 2400 may offer more flexibility for mixed work without the footprint of a dedicated press
- List Item:
Your work involves curved or segmented profiles rather than standard rectangular frames — the Soukup Segment Press Machine is designed specifically for that application
- List Item:
Your primary requirement is glazing and finishing rather than structural frame assembly — the Soukup Mounting & Glazing Stand GW 2500 is better suited to that stage of the process
- List Item:
You are unsure whether a hydraulic press is the right approach for your production level — talk to IWM before specifying, as the correct choice depends on throughput, frame sizes, and workshop layout
- Key Specifications:
- Specification Name:
Standard Bed Size, Specification Value:
3200 × 2100 mm (FP-S 32.21), Specification Notes:
This is the standard stocked configuration — confirm availability of the 2500 × 1800 mm and 4000 × 2600 mm variants with IWM before specifying.
- Specification Name:
Maximum Bed Size, Specification Value:
4000 × 2600 mm (FP-S 40.26), Specification Notes:
Suits workshops assembling large commercial or heritage window and door frames; confirm floor space and access requirements before ordering.
- Specification Name:
Clamping Pressure, Specification Value:
1,500 kgf per cylinder (100 mm stroke), Specification Notes:
Each vertical beam delivers independent, controlled clamping force — allowing pressure to be set separately for vertical and horizontal axes to suit the frame being glued.
- Specification Name:
Drive Type, Specification Value:
Electro-hydraulic
- Full Specifications:
- Specification Name:
Model — Standard, Specification Value:
FP-S 32.21
- Specification Name:
Bed Size — Standard, Specification Value:
3200 × 2100 mm
- Specification Name:
Model — Small, Specification Value:
FP-S 25.18, Specification Notes:
Available upon request only.
- Specification Name:
Bed Size — Small, Specification Value:
2500 × 1800 mm
- Specification Name:
Model — Large, Specification Value:
FP-S 40.26, Specification Notes:
At this footprint, allow additional clearance for loading and unloading assembled frames; check floor loading capacity with IWM.
- Specification Name:
Bed Size — Large, Specification Value:
4000 × 2600 mm
- Specification Name:
Drive Type, Specification Value:
Electro-hydraulic
- Specification Name:
Clamping Pressure, Specification Value:
1,500 kgf per cylinder, 100 mm stroke, Specification Notes:
Two independent pressure gauges — one for vertical, one for horizontal — let the operator set and monitor clamping force precisely for each axis.
- Specification Name:
Number of Vertical Clamping Beams, Specification Value:
3 (FP-S 32.21) / 4 (FP-S 40.26), Specification Notes:
Each beam carries one vertical hydraulic piston with self-locking pins and a counterbalance; beams slide on ball-bearing rails so a single operator can reposition them quickly between frames.
- Specification Name:
Horizontal End Beam, Specification Value:
1, with 2 hydraulic pistons (upper counterbalanced)
- Specification Name:
Control Type, Specification Value:
Electrically operated with manual lever locking pins and counterweighted pressure heads, Specification Notes:
The counterweight system means pistons can be repositioned without physical effort, keeping cycle times short when switching between frame sizes.
- Specification Name:
Power Requirement, Specification Value:
Confirm with IWM — electrical supply details available on request, Specification Notes:
Verify phase and amperage requirements with IWM before planning your electrical supply; the machine is electrically powered and will require a dedicated circuit.
- Specification Name:
Machine Weight, Specification Value:
Confirm with IWM — details available on request, Specification Notes:
Contact IWM for weight data so floor loading can be assessed before installation.
- Product Gallery:
- Image:
- Image:
- Video Gallery:
- Video Link:
https://www.youtube.com/watch?v=pjtAwkw4RoM
- Related Case Studies:
A dedicated electro-hydraulic frame press for assembling and gluing timber windows and doors — built for workshops that need consistent squareness and clamping pressure on every frame, without relying on operator judgement to get it right.
